Nicolas Holiday 803993220345 Pre-Lit Christmas Trees with Easy Light Instruction Manual

Nicolas Holiday 803993220345 Pre-Lit Christmas Trees with Easy Light

Product Information

The pre-lit Christmas tree offered by Nicolas Holiday Ltd. eliminates cord connections, providing a convenient and hassle-free holiday decorating experience. The tree is designed for indoor use only and operates at 120V. It comes with sections labeled A, B, and Top, along with a Tree Stand. The tree features color-changing lights that can be controlled using a foot pedal.

Product Usage Instructions

1. Carefully unpack the carton and remove the bubble wrap. Inspect the sections of the tree, which should include sections labeled A, B, and Top, as well as a Tree Stand.
2. To assemble section B, align it properly and insert it into the top of section A. Adjust the branch tips for a fuller look.
3. Insert section A into the tree stand and tighten the thumbscrew. Plug the tree into an electrical wall outlet.
4. Shape the tree by repeating Step 2.
5. To assemble the tree top, align and insert the TOP section into the top of section B. Adjust branch tips as needed.
6. Press the foot pedal gently to select the desired lighting function.

If the tree does not illuminate, try stepping on the Color change foot pedal and ensure that the wall switch is turned on. If a section of the tree does not light up, check for any cut or damaged wires in that section or ensure all electrical connections are properly made. Note that individual LEDs in the light sets are not replaceable.

Important: Do not use or install any additional Christmas lighting or ornamentation powered by a light bulb socket, as this may cause damage to the tree or personal injury. Such usage will void the limited warranty of the product.

Tree Storage

1. Disconnect the tree’s main extension cord plug from the wall outlet.

2. Starting from the top, disconnect the TOP section from section B, and then disconnect section B from section A. Gently fold the tips in branches and fold the branches up toward the center.

3. Remove section A from the tree stand and close the tree stand to place it back into the carton.

4. Refer to the provided drawing on how to repack your tree.

5. Store the carton neatly in a cool, dry location protected from sunlight. Avoid placing a heavy load on the carton to prevent damage to the tree inside.

6. Tree Storage

7. Remove the tree’s main extension cord plug from the wall outlet.

8. Starting at the top, disconnect the “TOP” from section “B” and then disconnect section “B” from section “A”. {Fig. 1}
   Note : Gently fold the tips in branches and fold the branches up toward the center. {Fig. 2} Care should be taken to avoid damage to the lights.

9. Remove section “A” from the tree stand and close tree stand to place into the carton.

10. Refer to the drawing on how to repack your tree. {Fig. 3}

IMPORTANT : Store your carton neatly in a cool, dry location protected from sunlight to prolong the tree life and to better keep the light sets in working order. Do not place a heavy load on the carton to avoid damage to or crushing the carton and tree inside.

Note: Proper storage helps prolong the tree’s life and keeps the light sets in working order.

Nicolas Holiday Ltd. thanks you for purchasing this pre-lit Christmas tree. Should you have any problems with your tree, visit us at www.geholidaylighting.com for more information. You can call our toll free number at 1-877-398-7337. Check our website for latest service hours and assembly instruction videos

TREE ASSEMBLY DIAGRAM

NOTE : No tools required

Tree Sections Tree Stand Approx. Asm Time 7.5 ft tree 3 Metal 5 – 10 minutes

INSTALLATION INSTRUCTIONS

1. Carefully unpack the carton. Remove bubble wrap and inspect the sections of your tree. The carton should include sections labeled “A”, “B” and “Top”, as well as a Tree Stand.
2. The tree stand should be open and set at 90° angle.
3. Insert Section labeled A into tree stand, tighten the thumbscrew. Then insert the plug into an electrical wall outlet.
4. Untie RED twist-tie to release branch panels. All branches should fall into place with a gentle pull on the outer layer of branches. Fig. A. Start at the inner and stagger the tips. Move each tip up to 40°. Fig. B. Make tips 2 & 3 to horizontial, tip 4 to vertical and tips 5 and 6 up to 45°.
5. To assemble the section labeled “B”, properly align and insert section “B” into the top of section “A”. (See Fig. C) Adjust branch tips, as needed, for a fuller look.
6. Repeat “Step 4” for shaping.
7. To assemble the tree top, properly align and insert the “TOP” section into the top of section “B”. (See Fig. D) Adjust branch tips, as needed, for a fuller look
8. Gently press on foot pedal to select the desired lighting function. (See below)

Troubleshooting Tips

If the tree does not illuminate, try stepping on the Color change foot pedal and make certain the wall switch is turned on. If one section of your tree does not illuminate, check that section for cut or damage wires or that all electrical connections on tree are made. Due to unique construction of the light sets, the individual LEDs are not replaceable. The light sets are designed for continued operation even if an individual LED fails to light

DISCLAIMER : DO NOT USE OR INSTALL ANY ADDITIONAL CHRISTMAS LIGHTING OR ORNAMENTATION THAT IS POWERED BY A LIGHT BULB SOCKET. DOING THIS MAY RESULT IN DAMAGE TO YOUR CHRISTMAS TREE OR CAUSE PERSONAL INJURY. DOING THIS, WILL RESULT IN A VOID OF THE LIMITED WARRANTY OF THIS PRODUCT Disconnect the decorative item from the power source before performing any maintenance or cleaning.

For indoor use only 120V
THIS IS NOT A TOY, FOR DECORATIVE USE ONLY. GE is a trademark of General Electric Company and is under license by Nicolas Holiday Ltd

©2022 Nicolas Holiday Ltd. 9 F., No. 37, Guangfu North Rd., Taipei, Taiwan 10560 All rights reserved. Printed in China 22034LO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>