Yorkville PSA2s Paraline Series 15 Inch Active Bass Reflex Subwoofer Owner’s Manual
- June 9, 2024
- Yorkville
Table of Contents
Yorkville PSA2s Paraline Series 15 Inch Active Bass Reflex Subwoofer
Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “ angerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons
The DO NOT STACK symbol is intended to alert the user that the product shall not be vertically stacked because of the nature of the product.
CAUTION: HOT SURFACE
ATTENTION: SURFACE CHAUDE
NOT TO BE SERVICED BY USERS
CAUTION: OVERHEAD LOAD
ATTENTION: CHARGE AÉRIENNE
The exclamation point within an equilatereal triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
DO NOT PUSH OR PULL
FOLLOW ALL INSTRUCTIONS
Instructions pertaining to a risk of fire, electric shock, or injury to a person
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS DEVICE IS FOR INDOOR USE ONLY! INSTALLED BATTERY PACKS SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE.
Read Instructions: The Owner’s Manual should be read and understood
before operation of your unit. Please, save these instructions for future
reference and heed all warnings.
Cleaning: Clean only with dry cloth.
Packaging: Keep the box and packaging materials, in case the unit needs
to be returned for service.
Warning: To reduce the risk or fire or electric shock, do not expose this
apparatus to rain or moisture. Do not use this apparatus near water!
Warning: When using electric products, basic precautions should always be
followed, including the following:
Power Sources
Your unit should be connected to a power source only of the voltage specified
in the owners manual or as marked on the unit. This unit has a polarized plug.
Do not use with an extension cord or receptacle unless the plug can be fully
inserted. Precautions should be taken so that the grounding scheme on the unit
is not defeated. An apparatus with CLASS I construction shall be connected to
a Mains socket outlet with a protective earthing connection. Where the MAINS
plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
Hazards
Do not place this product on an unstable cart, stand, tripod, bracket or
table. The product may fall, causing serious personal injury and serious
damage to the product. Use only with cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product. Follow the
manufacturer’s instructions when installing the product and use mounting
accessories recommended by the manufacturer. Only use attachments/accessories
specified by the manufacturer.
Equipment that is suspended overhead must use a secondary safeguard to prevent
personal injury in the event the primary mounting mechanism fails. Safety
eyebolts attached to the equipment and galvanized steel wire can be used
together to implement a failsafe mounting thus ensuring the safety of the
equipment and anyone positioned below the equipment. Improper installation can
result in bodily injury or death. If you are not qualified to attempt the
installation get help from a professional structural rigger.
Note: Prolonged use of headphones at a high volume may cause health
damage to your ears.
The apparatus should not be exposed to dripping or splashing water; no objects
filled with liquids should be placed on the apparatus.
Terminals marked with the “lightning bolt” are hazardous live; the external
wiring connected to these terminals require installation by an instructed
person or the use of ready made leads or cords.
Ensure that proper ventilation is provided around the appliance. Do not
install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
No naked flame sources, such as lighted candles, should be placed on the
apparatus.
Power Cord
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
The AC supply cord should be routed so that it is unlikely that it will be
damaged. Protect the power cord from being walked on or pinched particularly
at plugs. If the AC supply cord is damaged DO NOT OPERATE THE UNIT. To
completely disconnect this apparatus from the AC Mains, disconnect the power
supply cord plug from the AC receptacle. The mains plug of the power supply
cord shall remain readily operable.
Unplug this apparatus during lightning storms or when unused for long periods
of time.
Service
The unit should be serviced only by qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, requires battery pack replacement or has been dropped.
Disconnect power before servicing
The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING:
- To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.
- To completely disconnect this apparatus from the ac mains, disconnect the power supply cord plug from the ac receptacle.
- The mains plug of the power supply cord or appliance coupler shall remain readily accessible.
CAUTION
TO PREVENT ELECTRIC SHOCK HAZARD, DO NOT CONNECT TO MAINS POWER SUPPLY
WHILE GRILLE IS REMOVED.
PSA2s Introduction
Congratulations on your purchase of the PSA2s. The PSA2s is a premium-quality integrated subwoofer and power amplifier. It has been designed to be the perfect complement to our Paraline Series PSA1 powered speaker.
Input Level Switch
The Input level switch is provided to choose between line-level and speaker- level signals.
The line-level position is for use when the PSA2s is fed a signal from a processor, electronic crossover, the output of an un-powered mixer, or the loop-through of a powered speaker cabinet. When using the line-level mode, the use of balanced ¼-inch (Tip, Ring, Sleeve) and/or XLR cables will reduce the unit’s sensitivity to hum and buzz.
The speaker level position should be used when the PSA2s is fed with a ¼-inch
speaker cable from the output of an amplifier or a powered-mixer, or from the
parallel connection on an un-powered speaker cabinet. For speaker level
operation, connect the PSA2s just like an ordinary speaker (in parallel using
the loop-through jacks) along with the passive full-range loudspeakers.
PSA2s Level
The Level control adjusts the amount of bass added to the sound system by the PSA2s. This control adjusts for the relative sensitivity of the companion full-range loudspeakers and the desired system frequency response. This control should be set by listening with a mediumlevel input signal (such that the limiter is not firing).
Note: It is not recommended to set this control at high levels since the limiter determines the output level.
Note: A setting at the center detent on the PSA2s Level control is the correct starting point when setting up a sound system. From there, adjustments can be made for the best sound. The detent is the setting that will give full power when the line input is used and the input signal is at a level of +3 dBV.
Input Jacks
The inputs are designed to make it easy to hook up your PSA2s to almost any audio system with minimal hassle. Both ¼-inch and XLR inputs and Thru connections are supplied.
The PSA2s may be plugged in before or after the full-range loudspeaker. The PSA2s does not alter the signal to the daisy-chained (thru) loudspeakers and will not draw any power from the host amplifier/processor driving them. Also, note that an external crossover is not necessary when using the PSA2s.
Note: As well as accommodating full-range loudspeakers, the Thru jacks allow many PSA2s subwoofers to be connected in a string (parallel). There is no practical limit to the number of PSA2s subwoofers that may be connected together.
Protection
he PSA2s has several internal protection mechanisms against over-current, over excursion, clipping, and excessive average power output. In some cases, when protection is activated, the output will be cut off. In these cases, the power LED will blink, and the PSA2s will attempt to restart itself. If the fault persists, you should take your PSA2s to the nearest authorized service center for repair by a qualified service technician.
At high power levels when the limiter is operating, increasing the subwoofer level control will not increase the output. For the best results, set the system so that the limiter LED occasionally (a few times per second) lights up. The limiter is present in the circuit at all times to prevent distortion and to prevent over excursion of the speakers.
Note: The PSA2s’ built-in stand mounting adapter can be used with the Yorkville SW TUBEHD accessory to support either one or two of our PSA1 cabinets. The support tube can be used safely as long as the PSA2s is on a flat, level surface.
WARNING: Larger or heavier cabinets should NOT be used!
Specifications
- Model: PSA2s
- System Type: Active Bass Reflex Subwoofer
- Program Power (watts): 2400W program (4800W peak)
- Max SPL (dB): 134 Peak / 131 contnuous
- Frequency Response (Hz +/- 3db): 30 – 100
- Crossover Frequency (Hz): Fixed @ 100Hz
- Driver Configuration: 2 x 15-inch
- LF Driver(s): 2 x 15-inch Ceramic Woofers w/ 3-inch voice coils
- LF Impedance (ohms): 2x 8 ohms
- LF Amplifier Type: Class-D
- Power Consumption (typ/max): 660VA/900VA (5.5A/7.7A@120V, 2.9A/3.9A@230V)
- Enclosure Materials: 15mm Birch
- Baffle Materials: 15mm Birch
- Covering / Finish: Urethane Paint (Black)
- Dimensions (DWH xbackW, inches): 23.75 x 18 x 38
- Dimensions (DWH xbackW, cm): 60.3 x 45.7 x 96.5
- Weight (lbs/kg): 156/70.76
specifications subject to change without notice
Block Diagram for PSA2s
Unlimited Warranty
Yorkville’s two and ten-year unlimited warranty on this product is
transferable and does not require registration with Yorkville Sound or your
dealer. If this product should fail for any reason within two years of the
original purchase date (ten years for the wooden enclosure), simply return it
to your Yorkville dealer with original proof of purchase and it will be
repaired free of charge. This includes all Yorkville products, except for the
YSM Series studio monitors, Coliseum Mini Series and TX Series Loudspeakers.
Freight charges, consequential damages, weather damage, damage as a result of improper installation, damages due to exposure to extreme humidity, accident or natural disaster are excluded under the terms of this warranty. Warranty does not cover consumables such as vacuum tubes or par bulbs. See your Yorkville dealer for more details. Warranty valid only in Canada and the United States.
Customer Support
WORLD HEADQUARTERS
CANADA
Yorkville Sound Limited
550 Granite Court Pickering, Ontario
L1W 3Y8 CANADA
Voice: 905-837-8481
Fax: 905-837-8746
U.S.A.
Yorkville Sound Inc.
4625 Witmer Industrial Estate Niagara Falls, New York
14305, USA
Voice: 716-297-2920
Fax: 716-297-3689
WEB: www.yorkville.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>