silver ht S109 Tablet Keyboard Case User Manual

silver ht S109 Tablet Keyboard Case

Thank you for purchasing S109 tablet keyboard cases.

Product Overview

Keyboard

Protection Case

Packing List

• 1*Tablet Keyboard Case
• 1*User Manual
• 1*USB-C Charging Cable

Charging

• Fully dry off the USB-C charging port before charging.
• Fully charge the tablet keyboard case before the first use.
• When the power of the keyboard is too low, the power indicator light will flash red.

Please charge in time to ensure normal use.
Note : When the power level is low, the transmission of the keyboard may be delayed, stuck and unstable.

Pairing

1. Toggle the power switch to ON(1), the power indicator turns to blue for 1 second and then goes out the keyboard is turned on.
2. The keyboard will automatically enter pairing mode after the first powered on. You can also press and hold Pairing Button (c) ‘ for 3 seconds to enter the pairing mode,and then the pairing indicator will flash rapidly.
3. Go to setting and turn the device’s “Bluetooth” on.
4. Search for ” Wireless Keyboard” and click “Pair”
5. Then the keyboard is connected, pairing successfully.

Note:

1. If the keyboard is turned on for 3 minutes without being connected to any devices, it will enter sleep mode automatically until you press any key or press and hold (c for 3 seconds to repairing.
2. If the keyboard has already been paired with iPad, they will automatically connect to each other next time without pairing again.

Sleep Mode

1. When you not use the keyboard for more than 30 minutes, the keyboard will automatically go to sleep mode and disconnect from devices.
2. Before using the keyboard, please press any key to wake it up and the keyboard will automatically connect to the device within 3 seconds.
   Note : The touchpad can not wake the keyboard up when it in sleep mode.

Function Key Description

Indicator

Schematic Diagram of Touchpad Functions

Specifications

Note : Features and technical specifications are subject to change without notice,we apologize for any inconvenience.

Safety Instructions

Warning : Fire, electric shock, damage to keyboard device could occur if the following instructions are not obeyed

Danger (high risk) X Warning (Moderate risk) & Note (Poor risk)

1. Away from edge tool
2. Away from microwave radiation source
3. Do not place heavy objects on this product
4. No shocking and bending
5. Away from oil, chemical, or organic solvents

FAQ

1. Q1. I can’t find the keyboard name on iPad ?
   A: 1. Please make sure you have opened the keyboard to ON status;
   2. Please press the ” c” button for 3 seconds till the indicator flashing rapidly;
   3. If you tried both 1 & 2, then kindly reset the keyboard or the iPad.

2. Q2: Why can’t I type in Spanish, French or other small languages?
   A: Our keyboard are standard US English version, if you want to type in small languages, first you need to upload the keyboard language in your iPad. (Must connected keyboard) Then you need to change the input to the correct language. “Settings-General-Keyboard-Keyboard-Add new keyboard.”

3. Q3: Can I use the keyboard for Samsung tablet or smartphones?
   A: Though our keyboard case combo only for iPad 10th because of the cover, but if you want to use the keyboard for Other Tablets or Smartphones, Normal function are the same, just have a little difference for the shortcut keys and touchpad.

4. Q4: Why can’t I use the touchpad?
   A: Please press ” fn+shift+spacebar” to open or close the touchpad.

5. Q5: Why I press the caps to switch the languages?
   A: Please follow the below steps:
   Setting-General-Keyboard-Hardware keybaord-Turn off the Swtiches languages using Caps Lock.

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can bused in portable exposure condition without restriction.

WARRANTY CARD

ATTENTIONS:

• Please read the return procedures and warranty policy carefully on our website. before sending items back to point-of-purchase.
• Please fill the card and send it to your reseller together with the product if your product’s warranty is valid.

1. S.N:
2. Date of Purchase:
3. Product Model:
4. RMA Number:
5. Return Reason:
6. Customer Name:
7. TEL:
8. E-mail:
9. Address:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>