dji Mavic 3M Imaging Drone User Guide
- June 9, 2024
- DJi
Table of Contents
dji Mavic 3M Imaging Drone
Aircraft
DJM MAVIcTM 3M features both an Infrared Sensing System and Upward,Downward, and Horizontal Omnidirectional Vision Systems, allowing for hovering and flying indoors as well as outdoors and for automatic Return to Home while avoiding obstacles in all directions. * The built-in DJI AirSense system senses nearby aircraft in the surrounding airspace to ensure safety. With a precise three-axis gimbal to stabilize the high-performance multi-camera payload, the DJI PILOT 2 app can be used to view in real time from the RGB and multispectral cameras. TheRTK module provides data for centimeter-level precision positioning accuracy. ** At the same time, the spectral sunlight sensor on top of the aircraft detects solar irradiance in real-time for imaging compensation, maximizing the accuracy of collected multispectral data and improving efficiency for agriculture missions and environmental monitoring.
OverView
- Gimbal and Camera
- Horizontal Omnidirectional Vision System
- RTK Module
- Auxiliary Bottom Light
- Downward Vision System
- Infrared Sensing System
- Front LEDs
- Motors
- Propellers
- Aircraft Status Indicators
- Landing Gears (built-in antennas)
- Upward Vision System
- USB-C Port
- microSD Card Slot
- Battery Level LEDs
- Intelligent Flight Battery
- Power Button
- Battery Buckles
- Spectral Sunlight Sensor
The vision and infrared sensing systems are affected by the surrounding
conditions.
Read the User Manual for more information.
To be used with a Network RTK service, DJI D-RTK 2 High Precision GNSS Mobile
Station (sold seperately), or post-processed kinematic (PPK) data (recommended
when RTK signal is weak during operations).
Remote Controller
The DJI RC Pro Enterprise remote controller features 03 Enterprise, the latest version of DJl’s signature OCUSYNC image transmission technology, and can transmit a live HD view from the camera of the aircraft at a distance of up to 15 km. The remote controller has wide range of aircraft and gimbal controls as well as customizable buttons. The built-in microphone allows recording voice and the 5.5-in high brightness 1000 cd/m screen boasts a resolution of 1920×1080 pixels. Users can connect to the internet via Wi-Fi and the Android operating system comes with a variety of functions such as Bluetooth and GNSS.
- Control Sticks
- Back/Function Button
- RTH Button
- Flight Pause Button
- Flight Mode Switch
- 5D Button
- Power Button
- Confirm Button
- Touchscreen
- M4 Screw Hole
- microSD Card Slot
- USB-C Port
- Mini HDMI Port
- Microphone
- Gimbal Dial
- Record Button
- Antennas
- Status LED
- Battery Level LEDs
- Focus/Shutter Button
- Camera Settings Dial
- Air Vent
- Control Sticks Storage Slot
- Customizable C1 Button
- Speaker
- Customizable c2 Button
- Air Intake
The remote controller can reach its maximum transmission distance (FCC) in a wide-open area with no electromagnetic interference at an altitude of about 120 m (400 ft).
Instruction
-
Watching the Tutorials
Scan the QR code or visit DJl official website to watch the tutorial videos.
https://ag.dji.com/mavic-3-m/video -
Charging the Battery
Charge to activate the Inteligent Flight Battery and the internal battery of the Remote Controller before using it for the first time.
Check battery level: press once.
Power on/off: press, then press and hold.
-
Preparing the Aircraft
- Unfold the front arms before the rear arms. All arms and propellers must be unfolded before takeoff.
-
Preparing the Remote Controller
The optimal transmission range is where the antennas face thee aircraft, with the angle between the antennas and the back of the remote controller being 180° or 270°.
- DO NOT operate other wireless devices at the same frequency as the remote controller, to avoid signal interference.
- A warning prompt appears in DJI Pilot 2 if the transmission signal is weak.
- Adjust the antennas to make sure that the aircraft is within the optimal transmission range.
Getting Ready for Takeoff
A DJI accOunt and internet connection are required to activate the aircraft and the remote controller. Before activating the aircraft in DJI Pilot 2, power on the remote controller and follow the prompts to activate.
Flight
Manual Takeoff/Landing
Start/Stop Motors:
perform Combination Stick Command and hold for two seconds.
Takeoff:
slowly push the left control stick (mode 2) up to take off.
Landing:
slowly push the left control stick (mode 2) down until the aircraft lands.
Hold for three seconds to stop the motors.
Control Stick Mode
The default control stick mode is mode 2. The left control stick controls the altitude and heading of the aircraft, while the right control stick controls the forward, backward, and sideward movements.
- Always set an appropriate RiTH mode and RTH altitude before takeoff.
- Press the Flight Pause button for emergency braking during flight.
Specifications
Aircraft (Model: M3M)
5.8GHz and 5.1GHz frequencies are prohibited in some countries. In some
countries,the 5.1GHz frequency is only allowed for indoor use.
The data is tested in an environment with no obstructions for a variety of
typical interference intensity scenarios, without a guarantee of the actual
flight distance, for reference only.
https://ag.dji.com/mavic-3-m/downloads
This content is suDject to change without prior notice.
Cl and MAVIC are trademarks of DJI.
Copyright © 2022 DJI AlL Riehts Reserved.
Copyfish