TECKNET EWM01002 Cordless Mouse User Manual
- June 9, 2024
- TECKNET
Table of Contents
TECKNET EWM01002 Cordless Mouse User Manual
Package Contents:
Button Instructions:
- Left click button
- Scroll wheel
- Right click button
- DPI Switch button
- Indicator light
- Forward button
- Backward button
- Receiver
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Shenzhen Unchain Technology Co., Ltd. declares that the product type
EWM01002 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://eu.tecknetonline.com/
Product Specifications:
Operating Frequency: 2.4GHz
Default: 1200DPI
Receiver Interface: USB version 2.0
Battery Type: 2x AA Batteries
Working Voltage: 3.0V
Working Current: <15mA
Transmission Power: 1.5dBm
System Requirements:
Systems compatible: Windows 2000, 2003, XP, Vista, Win7, Win8, Win8.1, Win10, macOS, Linux Note: The scroll wheel only works under the operating systems listed above. If you use the mouse under a different operating system, the mouse may either not work or lose its enhanced features.
Instructions:
- Open the battery cover.
- Insert the batteries into the compartment, ensuring they correspond with the polarity marking.
- Replace the battery cover.
- Switch on the mouse by adjusting the power switch underneath the mouse. The power indicator LED at the top of the mouse will flash.
- The mouse is equipped with low power indicator. When the battery power gets low during the period of use, the indicator under the scroll wheel will flash. Please replace the battery.
Note:
When switching to 800DPI, the LED indicator will flash once
When switching to 1200DPI, the LED indicator will flash twice
When switching to 1600DPI, the LED indicator will flash 3 times
When switching to 2000DPI, the LED indicator will flash 4 times
When switching to 2400DPI, the LED indicator will flash 5 times
When switching to 3200DPI, the LED indicator will flash 6 times
IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS.
Limited 12-Month Warranty
(12 MONTH) What this warranty covers.
Shenzhen Unchain Technology Co., LTD. (Manufacturer: “Unchain”) warrants to
the original purchaser of this TECKNET product that the product shall be free
of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Unchain warrants the TECKNET product for 12 Months.
What will we do to correct problems?
Unchain will repair or replace, at its option, any defective product free of
charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the TECKNET product is not provided
to Unchain for inspection upon Unihan’s request at the sole expense of the
purchaser, or if Unchain determines that the TECKNET product has been
improperly installed, altered in any way, or tampered with. The TECKNET
Product Warranty does not protect against acts of God such as flood,
earthquake, lightning, war, vandalism, theft, normal-use wear and tear,
erosion, depletion, obsolescence, abuse, damage due to low voltage
disturbances (e.g. brownouts or sags), non-authorized program, or system
equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit TECKNET website or email
[email protected] for more
information. To extend the warranty period, please visit TECKNET website and
register your TECKNET products within 90 days of purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in
this guide are accurate and complete, no liability can be accepted for any
errors or omissions and we reserve the right to make any changes without
further notice to any products mentioned herein.
Correct Disposal of This Product
( Waste Electrical& Electronic Equipment ) This Marking shown on the product
or its literature, indicate that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.Household user should contact
either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contact. This product
should not be mixed with other commercial wastes for disposal.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
~ Increase the separation between the equipment and receiver.
~ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
~ Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.