F C LD-601 Food Display Warmer User Manual
- June 1, 2024
- F C
Table of Contents
Food Display Warmer
User’s Manual
LD-601 Food Display Warmer
Warning: Uses must be in accordance with instructions, otherwise, accepting the consequences by oneself.
The design are innovative and unique, beautiful appearance, arc shape, adjustable three display, surrounded by perspective glass, there is optional thermostat with temperature display, make the temperature uniform, and with humidity compensation, maintaining food and humidity. The performance has the function of preserving heat and moisture.
The basic Parameters
SKU | Voltage | Frequently | Power | Dimension(mm) | N/W |
---|---|---|---|---|---|
LD-601 | 110V | 60Hz | 1.2kW | 660×485×645 | 32Kg |
LD-602 | 110V | 60Hz | 1.5kW | 900×485×645 | 38.5Kg |
LD-604 | 110V | 60Hz | 1.0kW | 380×485×645 | 20Kg |
Method of operation
A. Product must be safety ground before use.
B. The using voltage should be the same as rated voltage.
C. Before power on, you make sure that adding water to the basin for 0.6
liters.
D. Power on, then power indicator light. Rotary heat switch, select the food
holding temperature, make sure room temperature could rise by natural
convection, the temperature can be maintained.
E. During use, such as the need for lighting, to open the lighting switch,
make operation more convenient and display effect better. At the same time, to
open the top of the decorative lights can increase the display effect.
F. After use for cleaning must be cut off the power, to prevent the accident;
G. Use of the process, such as abnormal behavior should be stop, clearing of
fault by professionals, and then can continue to use.
Transport and storage:
During transport to prevent vibration, collision, upside down, squeeze, waterproof, and stored in the warehouse that is non-corrosive gas.
Cleaning and maintenance.
After use with non-corrosive cleaning agent clean the cupboards bore.
Prohibited the use of paint has rubbed soluble liquid insulation cabinet
surface!
Electrical schematic:
D1– Power indicator RD2、D3– Illumination light
K1—Illumination switch| R—Heat Pipe WK–Thermostat
D4、D5–Decorative lights
K2—Decorative switch
---|---
Note:For the first time,the temperature should be adjusted to the maximum for about 10minutes.If there is odor or smoke,it is normal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>