TIGHT AV 548412 DANTE 2CH XLR Input Adapter User Manual
- June 2, 2024
- TIGHT AV
Table of Contents
TIGHT AV 548412 DANTE 2CH XLR Input Adapter User Manual
Product Introduction
Thanks for choosing the AU-X2I-DA.
The device inputs 2 channels of analog line level audio to be distributed
through your Dante network, supporting sampling rates up to 96kHz, using
Aluminate’s original Dante Ultimo chip.
Features
- Plug and Play
- Dante and AES67 support
- 24-bit audio support
- 2X0 audio channels
- Supports 802.3af PoE
Packing List
- 1x AU-X2I-DA
- 1x User Manual
Panel Description
-
RJ45: Dante network communication port.
Green steady light indicates link; yellow flashing light indicates data traffic. The green light will flash to identify the device when clicking the Dante Controller “Identify” button (an eye-shaped symbol) on the host computer -
XLR: 2 x XLR-F connectors, for input signal.
Technical Specification
Audio
Max signal level| +24 dBu / +4 dBu / 0 dBu 0 dBV / -10 dBV
Frequency Response| 20Hz to 20kHz (-/+0.5dB)
Impedance| 20k Ohm balanced
10k Ohm unbalanced
Dynamic Range| >100 dB
Signal to Noise Ratio| >100 dB
THD| <0.01% @+4 dBu
Dante
Sample Rate| 44.1kHz,
48kHz, 96kHz
Bit Depth| 24
Dante Device Latency| 1, 2 or 5ms (configurable using Dante
Controller)
---|---
Network Transport| Dante Audio over IP AES67 RTP
Model Name| AU-X2I-DA
General
Operation Temperature| -5 to +55 (+23° to +131°F)
Storage Temperature| -25 to +70℃
(-13° to +158°F)
Power| 802.3af PoE
Power Consumption| 3.15W (Max)
Dimension (WHD)| 30 x 28 x 114 mm
Cable length| 300mm
Net Weight| 145g
Compliance| FCC, CE
Environmental| RoHs, WEEE
Customer Service
We provide limited warranty for the product within five years counting from
date of purchase (The purchase invoice shall prevail).
Note: Please contact your distributor immediately if any damage or defect
in the device is found.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>