TiGHT AV VC-C101U-ETH USB-C to HDMI2.0 Converter with USB and Ethernet User Manual

TiGHT AV VC-C101U-ETH USB-C to HDMI2.0 Converter with USB and Ethernet

Preface

Read this user manual carefully before using the product. Pictures shown in this manual are for reference only. Different models and specifications are subject to real product.
This manual is only for operation instruction, please contact the local distributor for maintenance assistance. The functions described in this version were updated by November, 2021. In the constant effort to improve the product, we reserve the right to make functions or parameters changes without notice or obligation. Please refer to the dealers for the latest details.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in which case the user at their own expense will be required to take whatever measures may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void the user’s authority to operate the equipment.

SAFETY PRECAUTIONS

To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.

• Unpack the equipment carefully and save the original box and packing material for possible future shipment.
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of extrusion.
• Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
• Install the device in a place with fine ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
• Unplug the power cord when left unused for a long period of time
• Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Product Introduction

Thanks for choosing the VC-C101U-ETH USB-C to HDMI converter. This converter is designed to convert 4K@60Hz 4:4:4(max) DisplayPort alt mode signal over USB-C video input to 4K@60Hz 4:4:4(max) HDMI 2.0 video output. For the USB-C input interface, it also supports USB 3.1 Gen2 data transfer, Gigabit LAN and 60W fast-charging. The converter includes three USB 3.1 device ports and one Ethernet Gigabit LAN port.

Features

• Input supports DisplayPort Alt mode up to 4K@60Hz 4:4:4 using DisplayPort 1.4 (DisplayPort 1.2 is limited to 4K@30Hz 4:4:4).
• Output supports HDMI 2.0, 4K@60Hz 4:4:4.
• HDCP 2.3 support.
• USB-C input supports 60W USB Power Delivery.
• Supports USB3.1 Gen2 (up to10Gbit/s) data transfer via USB-C.
• 3x USB 3.1 device ports for camera, keyboard and mouse.
• Ethernet Gigabit LAN pass-through via USB-C
• No software drivers required – Plug and Play

Packing List

• 1x VC-C101U-ETH
• 2x Mounting Ears with 4 Screws
• 4x Plastic Cushions
• 1x Power Adapter (DC 24V/5A)
• 1x User Manual

Customer Service

We provide limited warranty for the product within five years counting from date of purchase (The purchase invoice shall prevail).
Note : Please contact your distributor immediately if any damage or defect in the components is found.

Specification

Video Input

Input| (1) USB
Input Connector| (1) USB-C
Input Resolution| Up to 4K@60Hz 4:4:4
USB Standard| USB3.1 Gen2
Video Output
Output| (1) HDMI
Output Connector| (1) Female type-A HDMI
HDMI Output Resolution| Up to 4K@60Hz 4:4:4
HDMI Standard| 2.0b
HDCP Version| 2.3 compliant (backwards compatible)
USB
Connector| (3) USB-A, (1) USB-C

USB Standard

| (3) USB-A: USB 3.1 Gen 1, 5V1A External Power Supply

(1) USB-C: USB 3.1 Gen 2, 60W External Charging

Ethernet
Standard| 10/100/1000Base-T
General
Bandwidth| 18Gbps
Operation Temperature| -10 ~ +55℃
Storage Temperature| -25 ~ +70℃
Relative Humility| 10% – 90%
Power Supply| Input:100V~240V AC; Output: 24V DC 5A
Power Consumption| 68W(Max)
Dimension (WHD)| 145mm x 22mm x 80mm
Net Weight| 270g

Panel Description

Front Panel

1. Power LED : The LED illuminates green when power is applied.
2. CHARGING : The LED illuminates green when USB-C is charging an external device.

Rear Panel

• ETHERNET: 1x RJ45 port, connect to Ethernet.
• USB IN : 3x USB 3.1 device ports for camera, keyboard and mouse.
• USB- C IN: 1x USB-C port, connect to video source.
• HDMI OUT : 1x HDMI-A port, connect to HDMI display.
• DC 24V : DC barrel port to connect a power adapter.

System Connection

The following diagram illustrates typical input and output connections that can be utilized with the VC-C101U-ETH:

Panel Drawing

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>