Pioneer DJ DM-50D-BT Active Monitor Speaker Instruction Manual

Pioneer DJ DM-50D-BT Active Monitor Speaker

How to read this manual

Thank you for choosing this Pioneer DJ product. Be sure to read this manual, the “Quick Start Guide” and the “Precautions for Use” which are also included with this product. These documents include important information that you should understand before using the speakers.

What’s in the box

•  Power cord × 1
•  Audio converter cable (3.5 mm stereo mini plug to RCA) × 1
•  Speaker cord × 1
•  Bottom cushion × 2 (4pcs / 1 sheet)
•  Quick Start Guide × 1
•  Precautions for Use
•  Warranty (for some regions) *
•  Only products in Europe.

Products in North America and Japan include warranty information in the “Precautions for Use”.

Part names

Front panel

1. 1 3/4 inch soft dome tweeters
2. 2 POWER indicator
   • Lights up when the power is turned on. The indicator is off in Standby mode.
3.  Diffusers
   • Improve the sound directivity of high frequencies and provide spacious sound.
4. LEVEL knob
   • Adjusts the volume.
5.  Pairing button
   • Pairs the speakers with a Bluetooth device. Plays/pauses a track played on a Bluetooth device. For details, refer to “Listening to the music of a Bluetooth device” (Page 5).
6.  Pairing indicator (Page 5)
   • When flashing: Pairing operation is performed or waiting to connect
   • When lit: Connected with a Bluetooth device
7.  5 inch glass fiber woofers
8.  Bass reflex ducts
9.  Grooves
   • Adjust the airflow of the bass reflex ducts to radiate low frequencies smoothly
10. a Headphone terminal
    • This is a 3.5 mm stereo mini jack type output terminal. Connecting headphones mutes the sound output from the speakers and outputs the sound only from the headphones.

Rear panel

1. RCA INPUT terminals
   • These are RCA pin type unbalanced input terminals.
2. STEREO MINI INPUT terminal
   • This is a 3.5 mm stereo mini jack type unbalanced input terminal.
3. TRS INPUT terminals
   • These are 1/4-inch phone type balanced input terminals.
4.  Speaker connection connectors
   • Connect the left and right speakers using the supplied cord. Do not connect these speakers to an amplifier other than that of this system. Doing so may cause a damage or fire.
5.  POWER switch
   • Turns the power for the speakers on and off.
6.  AC IN
   • Connect to a power outlet with the supplied power cord. Connect the power cord after all the connections are complete. Use the supplied power cord.
7.  SOUND MODE switch
   • Switches between the DJ mode and PRODUCTION mode. DJ mode: For a punchy sound suited for DJ applications. PRODUCTION mode: For flat frequency response that accurately reproduces the input sound

CAUTION

• The POWER switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power.
• Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident.
• To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation). D3-4-2-2-2a*_A1_En
•  This product is provided with an auto standby function. If a state of no sound continues for a set time (approximately 30 minutes) during use, the product automatically turns off the POWER indicator and enters Standby mode with low power consumption regardless of whether there is a Bluetooth connection.
•  If the product enters Standby mode when there is a Bluetooth connection, the Bluetooth connection is disconnected and the Pairing indicator also turns off.
•  When an audio signal is input from the input terminals in Standby mode, the product automatically enters Power-on mode. Furthermore, the product also enters the Power-on mode if the Bluetooth pairing button is pressed while in Standby mode.
•  This auto standby function cannot be disabled
• After connecting to the terminals, lightly pull the speaker cord to make sure that heads of the speaker cord are securely connected to the terminals. A loose connection might cause audio output to be interrupted or noise to be output.
•  When connecting the speaker cord, thoroughly twist the core wires, and make sure that the core wires are not protruding out of the speaker terminals. Core wires protruding out of the speaker terminals may come into contact with the rear panel or with each other. This may cause an excessive load to be placed on the amplifier which results in operation stopping or a malfunction.
•  If a mistake is made with the polarities (+, -) on the LEFT and RIGHT sides when connecting the LEFT and RIGHT speaker cord, normal stereo effect can no longer be obtained.

Installation and connections

How to install

• A speaker’s playback sound is delicately influenced by conditions in the listening room. To produce optimum listening conditions, take due consideration of the conditions of your installation location before beginning actual installation.
•  Place the speakers at ear level.
•  For a natural stereo effect, the right and left speakers should be installed in symmetrical and equidistant positions from the listening position.
•   To prevent sliding, apply the supplied cushions to the bottom of the speakers.
•  The speakers should ideally be placed at an angle of 30° to the left and right (for a total of 60°) from the listening position, and facing inward.

VENTILATION CAUTION

When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 15 cm at top, 15 cm at rear, and 15 cm at each side).

WARNING

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed.

Connections

•  Disconnect the power cord before making or changing connections.
•  Read the instruction manuals for the devices you are going to connect with the speakers.
•  Connect the power cord after all the connections are complete
•  Use the supplied power cord.
•  The input signals to the RCA, STEREO MINI, TRS input terminals and the input signals from Bluetooth are mixed, so please beware of the volume level.

Connecting cords

• Connect the supplied speaker cord to the speakers.
•  Strip about 1 cm of the head of the supplied speaker cord and twist and remove the exposed insulator.
• After removing the insulator, thoroughly twist the core wires.
•  Connect the supplied speaker cord to the speaker terminals on the LEFT and RIGHT sides.
•  Insert the core wires into the terminals while pressing the claw on the speaker terminal.
• Connect the speaker cord with the red line into the + terminal side (red) and the speaker cord without the red line into the – terminal side (black)..

Listening to the music of a Bluetooth device

• These speakers allow you to wirelessly enjoy tracks saved to a Bluetooth device.
• When using the speakers connected with a Bluetooth device for the first time or when connected with another Bluetooth device, you need to pair the speakers and a Bluetooth device.
• Pairing (device mutual registration) is the operation required to connect a Bluetooth device and the speakers.

Pairing and connection procedure

•  Turn on the [POWER] switch on the speaker.
•  The Paring indicator flashes for approximately 30 seconds and the speakers enter Pairing mode.
•  If the Pairing indicator is off, press and hold the pairing button for at least 2 seconds to switch to Pairing mode again.
•  Perform the pairing procedure on a Bluetooth device.
• Perform the pairing procedure on a Bluetooth device while the speakers are in paring mode. For details, see the instruction manual of your Bluetooth device.
•  The Pairing indicator on the speaker stops blinking and lights up when the connection is complete.
• The Pairing indicator turns off if the speakers can’t pair with a Bluetooth device within 30 seconds.
•  A Bluetooth device that has already been paired can be connected by performing the connection procedure on the Bluetooth device side if the speakers are powered on.

Playback

• When you play music on a connected Bluetooth device, the music playing on the Bluetooth device is output from the speakers.
•  You can play/pause a track playing on a Bluetooth device by pressing the pairing button. (same function as the pause/play button on the Bluetooth device).

Additional information

Troubleshooting

If you think something is wrong with the speakers, check the information below and refer to the [FAQ] for the DM-50D-BT at the URL below. pioneerdj.com/support/

•  Inspect devices connected with the speakers.
•  The speakers may restore proper operation after you turn it off and on.

If the problems continue, read the “Precautions for Use” and consult an authorized service company or your dealer.

When connected via the RCA, STEREO MINI or TRS input terminals

When connected via Bluetooth

Trademarks and registered trademarks

•  The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
• AlphaTheta Corporation is under license. Other trademarks and trade names are those of their respective owners.
•  Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of
• Qualcomm Technologies International, Ltd., registered in the United States and other countries.
•  Other product, technology and company names, etc. mentioned herein are trademarks or registered trademarks of their respective owners

Specifications

• Type…………………………………………………………………………………………………………………………………………… 2-Way Active Speaker

• Amplifier

• Amplifier type…………………………………………………………………………………………………………………………………….. Class D with DSP

• Amplifier output……………………………………………………………………………………………………………… Lch: 25 W / 4 Ω, Rch: 25 W / 4 Ω

• Input terminals (balanced input)……………………………………………………………………………………………………………1/4″ TRS jacks × 1

• Input terminals (unbalanced input)………………………………………………………………… RCA pin jacks × 1, 3.5 mm stereo mini jack × 1

• Input impedance ………………………………………………………………………………………………………………………………………………….10 kΩ

• Output terminal ……………………………………………………………………………………………………………………..3.5 mm stereo mini jack × 1

• Speaker

• Enclosure…………………………………………………………………………………………………………………………………………………….Bass reflex

• Enclosure material …………………………………………………………………………………………………………………………….MDF vinyl laminate

• Woofer (LF driver)…………………………………………………………………………………………………………………………….. 5″ (127 mm) cones

• Tweeter (HF driver)…………………………………………………………………………………………………………………….. 3/4″ (19 mm) soft dome

• Bluetooth

• Version……………………………………………………………………………………………………………………………Bluetooth Specification Ver. 5.0

• Maximum transmission distance…………………………………………………………… Approximately 10 m* in unobstructed circumstances

• Frequency used ………………………………………………………………………………………………………………………………………………. 2.4 GHz

• Modulation …………………………………………………………………………………………………FH-SS (Frequency Hopping Spread Spectrum)

• Supported Bluetooth profiles………………………………………………………………………………………………………………………A2DP, AVRCP

• Supported Codec………………………………………………………………SBC, AAC, Qualcomm® aptX™, Qualcomm® aptX™ Low Latency

• Power unit / other

• Supported voltages………………………………………………………………………………………………………… AC 110 V – 240 V, 50 Hz / 60 Hz

• Power consumption ………………………………………………………………………………………………………………………………………………25 W

• Power consumption during standby mode ……………………………………………………………………………………………………..0.3 W or less

• Max. dimensions

• ……………………(W × H × D) Lch: 175 × 262 × 257 mm / 6.89″ × 10.32″ × 10.12″, Rch: 175 × 262 × 247 mm / 6.89″ × 10.32″ × 9.72″
  Weight………………………………………………………………………………………………………………Lch: 3.9 kg / 8.6 lbs., Rch: 3.5 kg / 7.7 lbs.

•  Transmission distances are a guideline. Transmission distance may change depending on the surrounding environment.

•  The specifications and design of this product are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>