Pioneer DJ DDJ-REV7 DJ Controller User Guide

Pioneer DJ DDJ-REV7 DJ Controller

pioneerdj.com/support/serato.com.
For FAQs and other support information for this product, visit the above site.

CAUTION
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING
This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.

WARNING
To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.

Operating Environment

Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light).

VENTILATION CAUTION
When installing this unit, make sure to leave space around the unit for ventilation to
improve heat radiation (at least 5 cm at rear, and 5 cm at each side).

• The graphical symbol placed on the product means alternating current.
• The graphical symbol placed on the product means direct current.
• The graphical symbol placed on the product means Class II equipment.

CAUTION
The switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).

When using this product, confirm the safety information shown on the bottom of the unit.

POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest service center or your dealer for a replacement.

CAUTION
This product is evaluated in moderate climate conditions.

For Europe
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a
retailer (if you purchase a similar new one). For countries not mentioned above, please contact your local authorities for the correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a safe level – a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

• Set your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
• Once you have established a comfortable sound level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

• Do not turn up the volume so high that you can’t hear what’s around you.
• Use caution or temporarily discontinue use in potentially hazardous situations.
• Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.

Supplied power cord

• The supplied power cord is designed specifically for 120 V. Do not use it with a voltage other than 120 V.
• Doing so may cause a fire or electric shock.

IMPORTANT NOTICE

• THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
• RECORD THESE NUMBERS ON PAGE 13 FOR FUTURE REFERENCE

For U.S.A. and other areas

Information to User
Alterations or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.

• Product Name: DJ Controller
• Model Number: DDJ-REV7
• Responsible Party Name: AlphaTheta Music Americas, Inc. OPERATIONS DIVISION
• Address: 2050 W. 190th Street, Suite 109, Torrance, CA 90504, U.S.A.
• Phone: 1-424-488-0480
• URL: pioneerdj.com.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specifications

AC adapter

• Power requirements…………………………………………………AC 100 V – 240 V, 50 Hz / 60 Hz
• Rated current………………………………………………………………………………………………..1.5 A
• Rated output………………………………………………………………………………… DC 24 V, 3.75 A

General – Main Unit

• Power consumption……………………………………………………………………DC 24 V, 1 000 mA
• Main unit weight…………………………………………………………………………..10.7 kg / 23.6 lbs.
• Max. external dimensions……….. (W x H x D) 732 x 82.4 x 382.2 mm / 28.8″ x 3.2″ x 15.0″
• Tolerable operating temperature……………………………….+5 °C – +35 °C (+41 °F – +95 °F)
• Tolerable operating humidity…………………………………………5 % – 85 % (no condensation)

Turntable part

• Drive method……………………………………………………………………….. Servo-type direct drive
• Motor………………………………………………………………………….3-phase brushless DC motor
• Braking system…………………………………………………………………………….. Electronic brake
• Rotation speed………………………………………………………………………….. 33 1/3 rpm, 45 rpm
• Rotation speed adjustment range……………………………………………….±8 %, ±16 %, ±50 %
• Turntable……………………………………………………Aluminum die-casting Diameter: 207 mm
• Starting torque……………………………………………………………………….0.18 N·m (1.8 kgf·cm)
• Start time………………………………………………………………………0.7 seconds (at 33 1/3 rpm)

Audio Section

• Sampling rate……………………………………………………………………………………………..48 kHz

• A / D, D / A converter…………………………………………………………………………………….. 24bit
  Frequency characteristic

• USB, LINE, AUX (LINE / PORTABLE), MIC 1, MIC 2…………………….20 Hz – 20 kHz

• S / N ratio (rated output, A-WEIGHTED)

  • USB……………………………………………………………………………………………………110 dB
  • LINE……………………………………………………………………………………………………..95 dB
  • PHONO…………………………………………………………………………………………………84 dB
  • AUX (LINE)……………………………………………………………………………………………95 dB
  • AUX (PORTABLE)…………………………………………………………………………………89 dB
  • MIC 1……………………………………………………………………………………………………81 dB
  • MIC 2……………………………………………………………………………………………………81 dB

• Total harmonic distortion (20 Hz – 20 kHzBW)

  • USB………………………………………………………………………………………………….0.003 %
  • LINE………………………………………………………………………………………………….0.005 %
  • PHONO……………………………………………………………………………………………..0.017 %

• Standard input level / Input impedance

  • LINE………………………………………………………………………………………. -12 dBu / 47 kΩ
  • PHONO………………………………………………………………………………….. -52 dBu / 47 kΩ
  • AUX (LINE)…………………………………………………………………………….. -12 dBu / 47 kΩ
  • AUX (PORTABLE)………………………………………………………………….. -24 dBu / 47 kΩ
  • MIC 1………………………………………………………………………………………. -57 dBu / 3 kΩ
  • MIC 2………………………………………………………………………………………. -57 dBu / 3 kΩ

• Standard output level / Load impedance / Output impedance

  • MASTER 1…………………………………………………………..+6 dBu / 10 kΩ / 450 Ω or less
  • MASTER 2…………………………………………………………..+2 dBu / 10 kΩ / 820 Ω or less
  • BOOTH……………………………………………………………….+6 dBu / 10 kΩ / 820 Ω or less
  • PHONES…………………………………………………………………+8 dBu / 32 Ω / 10 Ω or less

• Rated output level / Load impedance

  • MASTER 1…………………………………………………………………………….. +24 dBu / 10 kΩ
  • MASTER 2…………………………………………………………………………….. +20 dBu / 10 kΩ
  • BOOTH…………………………………………………………………………………. +24 dBu / 10 kΩ

• Crosstalk

  • LINE……………………………………………………………………………………………………..89 dB
  • PHONO…………………………………………………………………………………………………78 dB

• Channel equalizer characteristic

  • HI……………………………………………………………………………….. -∞ dB – +6 dB (20 kHz)
  • MID………………………………………………………………………………. -∞ dB – +6 dB (1 kHz)
  • LOW……………………………………………………………………………… -∞ dB – +6 dB (20 Hz)

• Microphone equalizer characteristic
  HI…………………………………………………………………………….. -12 dB – +12 dB (10 kHz)
  LOW………………………………………………………………………….-12 dB – +12 dB (100 Hz)

• Input / Output terminals

• LINE / PHONO input terminals
  RCA pin jacks……………………………………………………………………………………….. 2 sets

• MIC input terminal
  XLR connector & 1/4″ TRS jack…………………………………………………………………. 1 set
  1/4″ TRS jack…………………………………………………………………………………………. 1 set

• AUX input terminal
  RCA pin jacks…………………………………………………………………………………………. 1 set

• MASTER 1 output terminal
  XLR connector……………………………………………………………………………………….. 1 set

• MASTER 2 output terminal
  RCA pin jacks…………………………………………………………………………………………. 1 set

• BOOTH output terminal
  1/4″ TRS jack…………………………………………………………………………………………. 1 set

• PHONES output terminal
  1/4″ stereo phone jack……………………………………………………………………………… 1 set
  3.5 mm stereo mini jack……………………………………………………………………………. 1 set

• USB terminals
  USB type-B………………………………………………………………………………………….. 2 sets

• Be sure to use the [MASTER 1] output terminals for balanced output. If they are connected to an unbalanced input (such as RCA) using an XLR to RCA converter cable (or converter adapter), etc., the sound quality may be lowered or noise may occur. For connection with an unbalanced input (such as RCA), use the [MASTER 2] output terminals.

• Be sure to use the [BOOTH] output terminals for balanced output. If they are connected to an unbalanced input (such as an RCA or TS terminal) with a TRS to RCA converter cable (or converter adapter), TS cable, etc., the sound quality may be lowered or noise may occur.

• The specifications and design of this product are subject to change without notice.

ONE-YEAR LIMITED WARRANTY

AlphaTheta Music Americas, Inc. (COMPANY) warrants that Pioneer DJ branded products distributed by COMPANY in the U.S.A. and Canada that fail to function properly under normal use and conditions due to a manufacturing defect when installed and operated according to the owner’s manual enclosed with the unit, and any officially published guidelines such as technical specifications or service communications, will be repaired or replaced with a unit of comparable value, at the option of COMPANY, without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of COMPANY.

THIS WARRANTY IS VALID ONLY IN THE COUNTRY OF PURCHASE. THIS LIMITED WARRANTY APPLIES TO THE ORIGINAL OR ANY SUBSEQUENT OWNER OF THIS PIONEER DJ PRODUCT DURING THE WARRANTY PERIOD PROVIDEDTHE PRODUCT WAS PURCHASED FROM AN AUTHORIZED COMPANY DISTRIBUTOR/DEALER IN THE U.S.A. OR CANADA. YOU WILL BE REQUIRED TO PROVIDE A SALES RECEIPT OR OTHER VALID PROOF OF PURCHASE SHOWING THE DATE OF ORIGINAL PURCHASE OR, IF RENTED, YOUR RENTAL CONTRACT SHOWING THE PLACE AND DATE OF THE FIRST RENTAL. IN THE EVENT SERVICE IS REQUIRED, THE PRODUCT MUST BE DELIVERED WITHIN THE WARRANTY PERIOD, TRANSPORTATION PREPAID, ONLY FROMWITHINTHE U.S.A. OR CANADA, AS APPLICABLE. AS EXPLAINED IN THIS DOCUMENT. YOU WILL BE RESPONSIBLE FOR THE REMOVAL AND INSTALLATION OF THE PRODUCT. THE COMPANY WILL PAY TO RETURN THE REPAIRED OR REPLACED PRODUCTTOYOUWITHINTHE U.S.A. OR CANADA, AS APPLICABLE.

PRODUCT WARRANTY PERIOD

Parts

• 1 Year

Labor

• 1 Year

Audio and Video
The warranty period for retail customers who rent the product commences upon the date product is first put into use (a) during the rental period or (b) retail sale, whichever occurs first.

WHAT IS NOT COVERED
IF THIS PRODUCT WAS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND THIS PRODUCT IS SOLD STRICTLY “AS IS” AND “WITH ALL FAULTS”.

COMPANY SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL AND/OR INCIDENTAL DAMAGES, INCLUDING WITHOUT LIMITATION LOSS OF USE, LOSS OF PROFITS OR LOSS OF WAGES, TO THE GREATEST EXTENT ALLOWED BY APPLICABLE LAW.

THIS WARRANTY DOES NOT APPLY IF THE PRODUCT HAS BEEN SUBJECTED TO POWER IN EXCESS OF ITS PUBLISHED POWER RATING.
THIS WARRANTY DOES NOT COVER THE CABINET OR ANY APPEARANCE ITEM, USER-ATTACHED ANTENNA, ANY DAMAGE TO RECORDS OR RECORDING TAPES OR DISCS, ANY DAMAGE TO THE PRODUCT RESULTING FROM ALTERATIONS, MODIFICATIONS NOT AUTHORIZED IN WRITING BY THE COMPANY, ACCIDENT, MISUSE OR ABUSE, DAMAGE DUE TO LIGHTNING OR TO POWER SURGES, SUBSEQUENT DAMAGE FROM LEAKING, DAMAGE FROM INOPERATIVE BATTERIES, OR THE USE OF BATTERIES NOT CONFORMING TO THOSE SPECIFIED INTHE OWNER’S MANUAL.

THIS WARRANTY DOES NOT COVER THE COST OF PARTS OR LABOR WHICH WOULD BE OTHERWISE PROVIDED WITHOUT CHARGE UNDER THIS WARRANTY OBTAINED FROM ANY SOURCE OTHER THAN A COMPANY-AUTHORIZED SERVICE COMPANY OR OTHER DESIGNATED LOCATION. THIS WARRANTY DOES NOT COVER DEFECTS OR DAMAGE CAUSED BY THE USE OF UNAUTHORIZED PARTS OR LABOR OR FROM IMPROPER MAINTENANCE. ALTERED, DEFACED, OR REMOVED SERIAL NUMBERS VOID THIS ENTIRE WARRANTY THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY TAMPERING, ABUSE, OR NEGLECT OF THE PRODUCT, OR BY PARTS NOT PROVIDED BY THE COMPANY. THE COMPANY AND ITS SERVICE AND REPAIR FACILITIES ARE NOT RESPONSIBLE FOR DAMAGE OR LOSS OF ELECTRONIC INFORMATION OR DATA STORED ON ANY RETURNED PRODUCT.

NO OTHER WARRANTIES
THE COMPANY LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO A PERIOD NOT TO EXCEED THE WARRANTY PERIOD. NO WARRANTIES SHALL APPLY AFTER THE WARRANTY PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TOYOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

NO DEALER, DISTRIBUTOR, OR EMPLOYEE OF THE COMPANY IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR MODIFICATION OF THIS WARRANTY.

If any term of this warranty is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired.

TO OBTAIN SERVICE
COMPANY has appointed a number of Authorized Service Companies throughout the U.S.A. and Canada should your product require service. To receive warranty service you
need to present your sales receipt or, if rented, your rental contract showing place and date of original owner’s transaction. If shipping the unit you will need to package it
carefully and send it, transportation prepaid by a traceable, insured method, to an Authorized Service Company. Package the product using adequate padding material to
prevent damage in transit. The original container is ideal for this purpose. Include your name, address and telephone number where you can be reached during business hours.
On all complaints and concerns in the U.S.A. and Canada call Customer Support at 1-844-784-0000.

For hook-up and operation of your unit or to locate an
Authorized Service Company, please call or visit:
AlphaTheta Music Americas, Inc.
1-844-784-0000
pioneerdj.com.

DISPUTE RESOLUTION

Following our response to any initial request to Customer Support, should a dispute arise between you and COMPANY, COMPANY makes available its Complaint Resolution
Program to resolve the dispute. The Complaint Resolution Program is available to you without charge. You are required to use the Complaint Resolution Program before you
exercise any rights under, or seek any remedies, created by Title I of the Magnuson-Moss Warranty-Federal Trade Commission Improvement Act, 15 U.S.C. 2301 et seq.
To use the Complaint Resolution Program call 1-844-784-0000 and explain to the customer service representative the problem you are experiencing, steps you have taken to
have the product repaired during the warranty period and the name of the authorized Distributor/Dealer from whom the Pioneer DJ branded product was purchased. After the
complaint has been explained to the representative, a resolution number will be issued. Within 40 days of receiving your complaint, COMPANY will investigate the dispute and
will either: (1) respond to your complaint in writing informing you what action COMPANY will take, and in what time period, to resolve the dispute; or (2) respond to your
complaint in writing informing you why it will not take any action.

RECORD THE PLACE AND DATE OF PURCHASE FOR FUTURE REFERENCE

• Model No. _____
• Serial No. _____
• Purchase Date __
• Purchased From _____

KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE

© 2021 AlphaTheta Corporation. All rights reserved.

AlphaTheta MusiC Americas, Ihc.
2050 W. 190th Street, Suite 109, Torrance, CA 90504, U.S.A. TEL: +1 424-488-0480.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>