Pioneer DJ DM-50D-BT-W Active Monitor Speaker Instructions

DM-50D-BT / DM-50D-BTW

Active Monitor Speaker

Precautions for use
pioneerdj.com/support/
For FAQs and other support information for this product, visit the above site.

Thank you for buying this Pioneer DJ product. Please read through these precautions for use so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

Features

• Equipped with a Class D amplifier with a 96 kHz sampling rate that allows for high-performance playback of music over a
  a wide band of frequencies, giving you a punchy DJ sound.

• Equipped with a switch that allows you to select between two types of DSP tuning well-suited to DJ-ing and music production.

• With a new convex diffuser design that strikes a balance between smoothness in the treble range in the front direction and a wide directivity when set up on a table.

•  Compatible with AAC and Qualcomm® aptX™, allowing for Bluetooth playback with even better sound quality.

•  Equipped with a pairing button on the front of its main unit that enables pairing with a single touch.

Confirm All Accessories

• Power cord × 1
• Audio converter cable (3.5 mm stereo mini-plug to RCA) × 1
• Speaker cord × 1
• Bottom cushion × 2 (4pcs / 1 sheet)
• Quick Start Guide × 1
• Precautions for Use (this document)
• Warranty (for some regions) *
• Only products in Europe.
  Products in North America and Japan include warranty information in the “Precautions for Use”.

Read Before Use (Important)

CAUTION
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
D3-4-2-1-1_B1_En

WARNING
This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture.
D3-4-2-1-3_A1_En

WARNING
To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En

VENTILATION CAUTION
When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 15 cm at
top, 15 cm at rear, and 15 cm at each side).

WARNING
Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazards, the openings should never be blocked or covered with items (such as newspapers, tablecloths, curtains) or by operating the equipment on a thick carpet or a bed.
*[CAUTS D3-4-2-1-7b_A1_En**

Operating Environment
Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light).
*D3-4-2-1-7c_A2_En**

CAUTION
Do not play sine wave or narrowband noise with the high output level. If not, the speaker will be damaged.

Precaution for the DM-50D-BT/DM-50D-BTW
Do not connect this speaker to any amplifier other than the one supplied with this system. Connection to any other amplifier may result in a malfunction or a fire.
SGK006_A1_En

CAUTION
The POWER switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazards, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).
*D3-4-2-2-2a_A1_En**

POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest service center or your dealer for a replacement.
*S002_A1_En**

CAUTION
This product is evaluated in moderate and tropical climate conditions.
D3-8-2-1-7a_A1_En

The graphical symbol~ placed on the product means alternating current.
The graphical symbol placed on the product means direct current.
The graphical symbol placed on the product means Class II equipment.
D3-8-2-4_A1_En

WARNING
Store small parts out of the reach of children and infants. If accidentally swallowed, contact a doctor immediately.
D41-6-4_A1_En

This product is for general household purposes. Any failure due to use for other than household purposes (such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period.
K041_A1_En

Do not attach these speakers to the wall or ceiling, as they may cause injury in the event of a fall.
SGK007_A1_En

CAUTION

• This product is provided with an auto standby function. If a state of no sound continues for a set time (approximately 30 minutes) during use, the product automatically turns off the POWER indicator and enters a standby state with low power consumption regardless of whether there is a Bluetooth connection.
• If the product enters the standby state when there is a Bluetooth connection, the Bluetooth connection is disconnected and the Bluetooth indicator also turns off.
• When an audio signal is input from the input terminals in the standby state, the product automatically enters the power-on state. Furthermore, the product also enters the power-on state if the Bluetooth pairing button is pressed while in standby.
• This auto standby function cannot be disabled.
• After connecting to the terminals, lightly pull the speaker cord to make sure that the heads of the speaker cord are securely connected to the terminals. A loose connection might cause audio output to be interrupted or noise to be output.
• When connecting the speaker cord, thoroughly twist the core wires, and make sure that the core wires are not protruding out of the speaker terminals. Core wires protruding out of the speaker terminals may come into contact with the rear panel or with each other. This may cause an excessive load to be placed on the amplifier which results in operation stopping or a malfunction.
• If a mistake is made with the polarities (+, –) on the LEFT and RIGHT sides when connecting the LEFT and RIGHT speaker cord, the normal stereo effect can no longer be obtained.
• When pairing (connecting), move the Bluetooth device close to the speakers.
• A loud sound may be output when the playback operation is performed for the first time after connecting completes so we recommend lowering the volume before playback.
• The pause/play operation may not be possible with the pairing button depending on the application used.
• Connecting with the speakers may not be possible depending on the Bluetooth device.
• If you wish to pair the speakers with a different Bluetooth device, turn off the Bluetooth function of the currently connected Bluetooth device or disconnect the connection before performing the pairing operation.
• The speakers store the pairing information of up to eight Bluetooth devices and attempt to connect to the last paired device if the pairing button is pressed in the state of no connection with a Bluetooth device.
• In the event noise appears in your television image, there is the possibility that a Bluetooth device or this unit (including products supported by this unit) are causing signal interference with the antenna input connector of your television, video, satellite tuner, etc. In this event, increase the distance between the antenna input connector and the Bluetooth device or this unit (including products supported by this unit).
• If there is something obstructing the path between this unit (including devices supported by this unit) and the device equipped with Bluetooth wireless technology (such as a metal door, concrete wall, or insulation containing tinfoil), you may need to change the location of your system to prevent signal noise and interruptions. [for a service technician]

CAUTION
Since the fuse may be in the neutral of the mains supply, disconnect the mains to de-energize the phase conductors.

[For American Users and Canadian Users]

IMPORTANT

The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
** The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
D3-4-2-1-1b_A1_En**

The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a safe level – a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

• Set your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
•  Once you have established a comfortable sound level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

• Do not turn up the volume so high that you can’t hear what’s around you.
• Use caution or temporarily discontinue use in potentially hazardous situations.
• Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.
  S001a_A1_En

[For American Users]

[Supplied power cord]
The supplied power cord is designed specifically for 120 V. Do not use it with a voltage other than 120 V.
Doing so may cause a fire or electric shock.
D3-7-14_PDJ_A1_En

CAUTION
This product is evaluated in moderate climate conditions.
D3-8-2-1-7b_A1_En

Caution
To prevent fire hazards, the Class 2 Wiring Cable should be used for connection with the speaker and should be routed away from hazards to avoid damage to the insulation of the cable.
*D3-7-13-67_A1_En**

IMPORTANT NOTICE
THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
RECORD THESE NUMBERS ON PAGE 15 AND KEEP THEM IN A SAFE PLACE FOR FUTURE REFERENCE.
*D36-AP9-3_A1_En**

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
    When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
    D3-7-13-69_En

[For American Users and Others]
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
D8-9-2-5_A1_En

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply with without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from the person’s body (excluding extremities: hands, wrists, feet, and ankles).
D8-9-2-7-1_A2_En

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_A1_En

[For Canadian Users]
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply with without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from the person’s body (excluding extremities: hands, wrists, feet, and ankles).

For Europe

If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery, and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery, and recycling and thus prevent potential negative effects on the environment and human health.
K058b_B_En

Trademarks and Registered Trademarks

• The names of companies and products mentioned herein are trademarks or registered trademarks of their respective owners.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by AlphaTheta Corporation is under license. Other trademarks and trade names are those of their respective owners.
• Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.

Information to User
Alterations or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.
D8-10-2_A1_En

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Product Name: Active Monitor Speaker
Model Number: DM-50D-BT, DM-50D-BTW
Responsible Party Name: AlphaTheta Music Americas, Inc. OPERATIONS DIVISION
Address: 2050 W. 190th Street, Suite 109, Torrance, CA 90504, U.S.A.
Phone: 1-424-488-0480
URL: pioneerdj.com
*D8-10-4_C1_En**

Specifications

Type …………………………………………………………………………………………………………………………………….2-Way Active Speaker

Amplifier
Amplifier type ………………………………………………………………………………………………………………………………Class D with DSP
Amplifier output ……………………………………………………………………………………………………….Lch: 25 W / 4 Ω, Rich: 25 W / 4 Ω
Input terminals (balanced input) …………………………………………………………………………………………………….1/4″ TRS jacks × 1
Input terminals (unbalanced input) ………………………………………………………….RCA pin jacks × 1, 3.5 mm stereo mini-jack × 1
Input impedance …………………………………………………………………………………………………………………………………………. 10 kΩ
Output terminal …………………………………………………………………………………………………………….. 3.5 mm stereo mini-jack × 1

Speaker
Enclosure ……………………………………………………………………………………………………………………………………………. Bass reflex
Enclosure material ……………………………………………………………………………………………………………………. MDF vinyl laminate
Woofer (LF driver) ………………………………………………………………………………………………………………………5″ (127 mm) cones
Tweeter (HF driver) ………………………………………………………………………………………………………………3/4″ (19 mm) soft dome

Bluetooth
Version …………………………………………………………………………………………………………………… Bluetooth Specification Ver. 5.0
Output ……………………………………………………………………………………………………………………..Bluetooth Specification Class 2
Frequency used ………………………………………………………………………………………………………………………………………..2.4 GHz
Modulation ………………………………………………………………………………………… FH-SS (Frequency Hopping Spread Spectrum)
Supported Bluetooth profiles ……………………………………………………………………………………………………………… A2DP, AVRCP
Supported Codec ……………………………………………………….SBC, AAC, Qualcomm ®aptX™, Qualcomm® aptX™ Low Latency

Power unit / other
Supported voltages …………………………………………………………………………………………………. AC 110 V – 240 V, 50 Hz / 60 Hz
Power consumption ……………………………………………………………………………………………………………………………………… 25 W
Power consumption during standby mode …………………………………………………………………………………………….. 0.3 W or less
Max. dimensions (W × H × D) ………………………………Lch: 175 × 262 × 257 mm / 6.89″ x 10.32″ x 10.12″, Rch: 175 × 262 × 247 mm / 6.89″ x 10.32″ x 9.72″
Weight……………………………………………………………………………………………………… Lch: 3.9 kg / 8.6 lbs., Rich: 3.5 kg / 7.7 lbs.

The specifications and design of this product are subject to change without notice.

Informational Note for Customers in Japan Only.

© 2021 AlphaTheta Corporation. All rights reserved.

Alpha Theta EMEA Limited
Artemis Building, Odyssey Business Park, West End Road, South Ruislip, Middlesex, HA4 6QE, U.K. TEL: +44-203-7617-220

Alpha Theta Music Americas, Inc.
2050 W. 190th Street, Suite 109, Torrance, CA 90504, U.S.A. TEL: +1 424-488-0480

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>