PHILIPS DuraLed Pro Robust Well Glass LED Light Instruction Manual
- June 2, 2024
- Philips
Table of Contents
**
**
PHILIPS DuraLed Pro Robust Well Glass LED Light
Dimensions in mm
EYEBOLT VERSION (Standard Supply)
CRADLE VERSION
- MOUNTING BRACKET DETAILS
- Type : BY202P
- Lamp : LED
- Wattage/Voltage : 35W / 240 VAC, 50 Hz
- IP Classification : IP65
- Net Weight : 850 gm Approx
- Max. Projected Area : 0.016 m²
- CCT : 6500K, 4000K
- Application : Indoor/ Under covered area
-
Take the luminaire out of the packing box
-
For External wire connection use Junction Box of IP rating 65 or higher( Not part of Supply) Notice: Ensure Correct connection for polarities
-
ADDITIONAL SAFETY PROVISION
Safety chain can be fixed using a M4 screw, washer & nut at the location shown below. (Safety Chain & Screws are not part of luminaire supply) -
Luminaire orientation must always be facing downwards(as shown) irrespective of fixation position of Bracket. Allowed Variation: +/- 10°
- Eyebolt is part of Standard supply
- Cradle assembly and associated fasterners are not part of standard supply
CAUTION
- Ensure L-N-E is connected in right manner.
- 3 Core cable should be properly connected with ground.
- Product should be operated between 120-270V A.C.
- Luminaire must be brought down from the mounting position for maintenance.
- In case the Diffuser is found broken/damaged luminaire should not be powered on and it has to be replaced before using the luminaire.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire shall be replaced.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the Driver shall be replaced.
- Warrant Void if Earthing wire not connected properly with ground.
- Warranty Void if used in outdoor applications
FAILURE OF PRODUCT DUE TO NON COMPLIANCE TO ANY OF THE ABOVE, VOIDS WARRANTY OF PRODUCT.
Read User Manual Online (PDF format)
Loading......