PORTOS A-OK Tubular Motor User Manual

PORTOS A-OK Tubular Motor

Connection scheme

The connection scheme of the radio-controlled motor and a switch

If the motor directions are reversed, the location of the black and brown wires shall be respectively changed.

Configuring the end-limit switch positions

Note! Configuration shall always start with the bottom end-limit switch position!

1.  Set the motor in the position to be configured as the bottom end-limit switch position.
2.  On the somfy remote control, press and hold for about 7 seconds the WT button – the UP/DOWN motor movement will confirm successful performance of the operation.
3.  Open the roller shutter up to the position to be configured as the upper end-limit switch position.
4.  On the somfy remote control, press and hold for about 7 seconds the WT button – the UP/DOWN motor movement will confirm successful performance of the operation.

Resetting the end-limit switch positions and the motor

1.  On the somfy remote control, simultaneously press the WT and DOWN buttons.
2.  Release the WT button, pressing and holding the DOWN button.
3.  After one 1 second, press and hold the WT button again and press and hold for about 3 seconds both buttons – the double UP/DOWN motor movement will confirm successful performance of the operation.

WARNING – FOR THE SAFETY OF PEOPLE, IT IS IMPORTANT TO FOLLOW THESE USERS’ INSTRUCTIONS. KEEP THESE USER MANUALS AT ALL TIMES.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>