JBC CL7889 Wiper for Stands Instruction Manual
- June 3, 2024
- JBC
Table of Contents
JBC CL7889 Wiper for Stands Instruction
Packing List
The following items are included
- Wiper for Stands ……….. 1 unit
- Manual ……………………….. 1 unit Ref. 0027289
Features
Tapping
Tap gently to remove excess solder.
Wiping
Use the slots to remove remaining particles.
Wiper and Brass Wool Replacement
The wiper and brass wool can easily be removed for cleaning or replacement when they are worn.
Lift the wiper at its front edge.
Remove the wiper by pulling it out.
Replace the brass wool with a new one when it is worn out. Place the wiper back o replace them if desired.
Specifications
- CL7889
- Wiper for Stands
- Ref. CL7889 – red
- – Total Net Weight: 40 g / 0.088 lb
- – Package Dimensions / Weight: 90 x 55 x 40 mm / 60 g
- (L x H x W) 3.54 x 2.17 x 1.57 in / 0.132 lb
- ESD safe
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased. This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>