Koala Audio RK30 Wall Mount Cube Speaker User Manual
- June 3, 2024
- Koala Audio
Table of Contents
RK30
Wall Mount Cube Speaker User Manual
SAFETY INSTRUCTIONS
- When the speakers are installed on the walls, ensure the wall structure is reliable and that the speakers are firmly attached.
- Install the speaker in a location that can structurally support the weight of the speaker and its mounting hardware. otherwise it may result in the unit falling down and causing personal injury.
- Do not use nails, adhesives or other unauthorized devices long-term use and vibrations may cause it to fall easily.
- Do not touch or bump the woofer and tweeter. If these are damaged, the sound will be distorted.
- Lower the volume of the device and source unit when changing the input source. (i.e. To tune fm / cd). Turn off the device and source unit when installing or removing cables.
PACKING LIST
INSTALLATION
- Attach the bracket to the wall.
- Connect the speaker wire to the phoenix connector.
- Attach phoenix connector to the speaker.
- Attach the speaker to the bracket.
- Attach the rubber stopper.
CAUTION
- Most speaker damage is caused by amplifiers with too little power (wattage).
- Clipping is usually audible and it may vary from a harsh sound to a fuzzy or unclear sound.
- If you hear the clipping at high volume levels, turn down the volume until the distortion is gone.
- Damage to the speaker caused by distortion due to overpowering will void your warranty.
VOLUME CONTROL
The volume is controlled by your active speak
GENERAL FEATURES:
The RK30 Low Impedance Home Audio Loud Speaker offers a unique combination
of sleek ascetic design and high performance sound quality, Its small
footprint allows for easy system integration without compromising on sound
quality or performance IP66 Weather
Resistant rating allows for Indoor/Outdoor applications making it one of the
most versatile Home/Commercial Audio speakers available
SPECIFICATIONS
| Model | RK30 |
|---|---|
| Low Impedance RMS POWER | 40Watts |
| Low Impedance Dynamic POWER | 80 Watts |
| Frequency Response | 120-20KHz |
| SPL 1W/lm | 88dB |
| Max SPL 1m | 98dB |
| Impedance (ohms) | 8 |
| Loudspeaker system | Full Range |
| Woofer Cone Material | Paper |
| Grille Material | Cloth |
| Vertical Dispersion Angle 1000Hz | 180° |
| Mounting System | Turn/Tilt Bracket |
| Housing Material | ABS Plastic |
| IP Certified Weather Rating | 66 |
| Woofer Size | 2.5inch |
| Height | 94mm |
| Depth | 108mm |
| Width | 82mm |
| Net Weight Product (kg) | 0.48 |
Closet RALColour(Subject To RAL 9016(W)/ RAL9011(BL)
DESIGNED IN CALIFORNIA
MADE IN CHINA
Documents / Resources
|
Koala Audio RK30 Wall Mount Cube
Speaker
[pdf] User Manual
RK30, Wall Mount Cube Speaker, RK30 Wall Mount Cube Speaker, Mount Cube
Speaker, Cube Speaker, Speaker
---|---