acer AKR200 Wireless Keyboard and Mouse User Guide

AKR200 Wireless Keyboard and Mouse
User Guide

Acer Wireless Keyboard and Mouse
USER’S GUIDE
Ver.:1.00

AKR200 Wireless Keyboard and Mouse

AKR200 / AMR200
CAUTION: To use this product properly, please read the user’s guide before installing.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual.
The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is
available.

Functional Introduction

Mouse Buttons

1. Left button
2. Right button
3. Scrolling Wheel
4. LED Indicator
5. Forward
6. Backward
7. Battery Cover
8. ON/OFF Switch
9. Nano Receiver

Forward
Press this button to view the next page in your Internet browser.
Backward
Press this button to view the previous page in your Internet browser.

Keyboard Buttons

*Key Function (compound key, Press with Fn key)**

1| | Media Select| Turn on the Media player program.
2| | Mute| Mute (turns off) the computer’s sound.
3| | Volume down (Voice-)| Decrease the computer’s sound volume.
4| | Volume up (Voice+)| Increase the computer’s sound volume.
5| | Previous| Switch to the previous media track.
6| | Next| Switch to the next media track.
7| | Play/Pause| Switch between playing and pausing media.
8| | Stop (Media)| Stop playing the media in the media player.
9| | Homepage www( /e)| Start the default Web browser and loads the home Web page.
10| | Outlook (E-mail) > Default| Start the default e-mail program.
11| | My Computer| My Computer.
12| | My Favorites| Open My favorite after into Internet browser application.
13| | Number Lock Indicator.
| Caps Lock Indicator.
| Low Battery & Pairing Indicator.
14| Battery Cover

Installing the batteries

Step 1: Take the battery cover off.
Step 2: Insert the battery as shown inside the battery compartment.
AMR200 AKR200 Step 3 : Replace the cover.
Step 4: Turn on power switch.
AMR200 **Warning:

• Please insert the battery with the correct position according to the instruction labeled on the mouse & Keyboard.
  Setup the Connection between the Receiver and the Mouse & Keyboard 

  1. Insert the battery into the mouse & Keyboard, then follow the steps below.

  2. In the meantime, to open the cover under the mouse, take the nano receiver out.

  3. Plug the Nano receiver into the USB port on your computer.

  4. If the device does not work, please turn it into pairing mode.

  5. Pairing: Re-plug the receiver into the USB port on your computer, then press connect button of the mouse and keyboard “ESC + K”. If the mouse or keyboard does not
     work after 10 seconds, pair them again. (The receiver has auto pairing function).

  6. The LED indicator on the mouse & Keyboard flashes steadily when it is in pairing mode and stops blinking when it is successfully paired with the receiver.

  7. When low battery, the battery indicator on the keyboard or the mouse will start to blink.

*Mouse Indicator* Keyboard Indicator**

Documents / Resources

| acer AKR200 Wireless Keyboard and Mouse [pdf] User Guide
KB56, PRDKB56, AKR200, AMR200, AKR200 Wireless Keyboard and Mouse, AKR200, Wireless Keyboard and Mouse, Keyboard and Mouse, Mouse, Keyboard
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>