katranji AFMEP-2P/63P Adjustable Voltage Protector User Manual

**katranj**
AFMEP-2P/63P Adjustable Voltage Protector
User Manual

AFMEP-2P/63P Adjustable Voltage Protector

Normal Use and Installation Conditions:

• Normal use conditions
• Ambient air temperature
• Ambient air temperature shall not be more than +55t) and not less than -20*C and the 24h average temperature shall not be more than +35tX
• Altitude
• Altitude of the installation place shall not exceed 2000m.
• Atmospheric conditions
• Humidity
• The relative air humidity at installation place shall not be more than 50% when the ambient air temperature is +40Xi\ Relative humidity may be high under low temperature condition. For instance, when the mean minimum temperature in the wettest month is +20七,the mean maximum relative humidity in the month may reach 90%. Condensation produced due to temperature change shall be prevented by taking appropriate measure.
• Class of pollution: 3
• Installation conditions
• Protector can be vertically or horizontally mounted in cabinet. If specially required, it is necessary to make special order.
• Protector shall be mounted in medium without risk of explosion. In the medium, there shall be no gas and conductive dust which are sufficient to corrode metal and affect insulation effect.
• Protector shall be mounted in place that may not be invaded by rain and snow.

Product Setting:

1. Change the setting value by pressing a) keys.
2. Press   key for more than 12 seconds to restore the tac.tory settings
3. Press key tor more then 6 seconds to query the latest fault

Usage:
After being installed, the protector can be wired by user. Wherein, cross section of the wire shall be selected in accordance with standard applicable and on the basis of rated current of the protector. Pay attention to the locations of incoming and outgoing wires and the phase sequence before powering on for use.
Notes:

• The user shall follow relevant procedures and pay attention to the following items when carrying out various operations or tests to ensure the correct and safe use of the product
• The input and output shall be corrected connected on the basis of the product marking. (Wherein, the load current shall be less than protective current of the product.)
• Neutral line N cannot be improperly connected and shall be reliably wired; otherwise, the protector may not work normally.
• Before powering on, please carefully check whether the wiring is correct, whether the load matches with protective current of the product and whether the binding screw is tightened; otherwise, the product may be damaged.
• After powering on the product, don’t touch any live part to avoid electric shock.
• This product shall be combined with micro circuit breaker to play a role of short-circuit protection; otherwise, the product may not be able to realize load limit protection in case that input or load  end of the product appears short circuit.
• As the product has automatic reset function, after the product plays the role of protection and acts, it is necessary to remove the load (electric appliance) and check the circuit; otherwise the product wHI be frequently connected and disconnected to the load. Finally, the product or its circuit may be burnt due to frequent overload connection and disconnection for long time.
• Products that are not used for a long time shall be moisture-proof and dust-proof. Before use, they shall be debugged according to the above contents, and they can be put into operation only when they are normal.
• This product has no isolation function. Please disconnect the front circuit breaker when maintenance circuit.

Wiring Diagram:

Documents / Resources

| katranji AFMEP-2P/63P Adjustable Voltage Protector [pdf] User Manual
AFMEP-2P 63P Adjustable Voltage Protector, AFMEP-2P 63P, Adjustable Voltage Protector, Voltage Protector, Protector
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>