Katranji YCA1070C Infrared Motion Sensor User Manual

Katranji YCA1070C Infrared Motion Sensor

Product Information

The Infrared Motion Sensor Model YCA1070C is an energy-saving lighting switch that can identify day and night automatically. It has a wide detection range made up of up and down, left and right  service field. This product adopts high sensitivity detector, integrate circuit, and SMT. It utilizes human motion infrared rays as control signal sources. This product is easy to install, automatic, convenient, safe, and practical.

Features

1. Easy to install.
2. Automatic, convenient, safe, and practical.
3. Power and detection indication function.
4. Can identify day and night automatically.
5. Wide detection range made up of up and down, left and right service field.
6. New type of energy-saving lighting switch.
7. It has the function of power and detection indication.
8. The motion sensor can identify day and night automatically.
9. It has a wide detection range made up of up and down, left and right service fields.
10. This product is a new type of energy-saving lighting switch, it adopts a high sensitivity detector, integrated circuit, and SMT.
11. It utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once.

Specifications

• Output: Maximum 800W incandescent lamp, 200W fluorescent lamp
•  Power Consumption: 110V-240V, 50HZ, 0.1W (Static) 0.45W (Work)
•  Time Adjustment: Min 5±3 seconds Max5±2 minutes
•  Detection Range: 360°
•  Installing Height: 2.5m-3.5m
•  Detection Motion Speed: 0.6-1.5m/s
•  Hole Opening Size: 40mm
•  Ambient Light: 3-2000LUX(Adjustable)

Installation

1. Turn off the power.
2. Remove the transparent vinyl cover at the bottom of the sensor.
3. Loosen the screws in the connection terminal and connect the power and rated load to the connection terminal of the sensor according to the connection sketch map.
4. Tighten the screws and put the transparent vinyl cover into the original station.
5. Fold the metal spring of the sensor upwards until they are in I position with the sensor. Then put the sensor into the hole or installation boa what is in the ceiling. The size is similar to the item. Release the spring, and the sensor will be set in this installation position.
6. Folding the metal spring of the sensor upwards, until they are in the “I” position with the sensor, then put the sensor into the hole or installation boa that is in the ceiling, the size is similar to the item. Releasing the spring, the sensor will be set in this installation position.

For 220v motion sensor, you just provide 220V voltage to the sensor, don’t need the driver. Only 12V DC motion sensors need a 220V AC to 12V DC Driver or we said power supply or power adapter. Output Maximum 800W incandescent lamp, 200W fluorescent lamp

Note

The item can be less sensitive if you go forward the detector,but it can be sensitive if you go down the for cross-section. Ifthe person stops moving under the motion sensor, it won’t light on. When it is very hot in summer, then the temperature of the environment is nearly the same as people, it may not detect well. Made in China.

Note

The item can be less sensitive if you go forward the detector, but it can be sensitive if you go down the for cross-section. If the person stops moving under the motion sensor, it can’t light on also. When it is very hot in summer, then the temperature of the environment is nearly the same as people, it may not detect well

PIR MOTION SENSOR

LED LAMP

GUIDENCE

HOW MANY WARDS

MOTION DEDECTOR

Documents / Resources

| Katranji YCA1070C Infrared Motion Sensor [pdf] User Manual
YCA1070C Infrared Motion Sensor, YCA1070C, Infrared Motion Sensor, Motion Sensor, Sensor
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>