X4-LIFE 700379 Inspector III Energy Cost Meter Instruction Manual

: June 3, 2024
: X4-LIFE

X4-LIFE 700379 Inspector III Energy Cost Meter Instruction Manual

Product Overview

Thank you for buying our product, we wish you an enjoyable and successful use.

Information on this user manual

This user manual contains important information for the safe use of the product. Therefore, for your own safety and for a successful use, please read this user manual completely before assembling and using the product.
Please keep this operating manual for reference. If you pass on the product to anyone else, please hand over the operating manual as well.

Liability

We do not accept liability for any damage to property or for personal injury that is due to improper use or failure to follow the instructions in this operating manual and the safety advice. In such cases any claim under the guarantee is null and void!

Designated use

The Inspector III is the ideal device for measuring the consumption of electricity. Although the measurements are very accurate, the Inspector III is not certified as a valid meter to verify electricity bills. The Inspector III will not only show the current use of electricity, but will also log total time, voltage, wattage, amps, frequency, maximal wattage and minimal wattage. By entering your actual price per kilowatt per hour the Inspector III will show you the cost of use of the device which has been attached.
The Inspector III may only be used in rooms that are dry. It has not been developed to be used outside of rooms and may not be used in the open.
Any different use as described above may cause damage to the device and/or can become a hazard to your life and to others. The Inspector III may not be changed, opened or manipulated in any way. The safety instructions are to be followed carefully.

General Notes

All mentioned company and product names are registered trademarks under the rights of their owners. © All rights reserved.
No liabilities will be taken for damages or claims resulting out of not reading and/or not following the user guide and/or any form of modification on or in the product. Under these circumstances, no warranty services will be given.
Liability cannot be taken for consequential damages. The contents of this user manual may differ from the product. If so, please consult additional manuals in the packing. Keep this user manual in a safe place. If you give this product away to a third party, make sure that you also pass on the user manual.
For the reason of safety and CE licensing it is not allowed to modify this unit in any way and/or use it for functions, other than the designated use.

Declaration of Conformity

This product meets the requirements of both current national and European guidelines. The declaration of conformity can be found at : http://productip.com/?f=1d2ce1

Safety guide

The following safety instructions are not only for the safety and protection of the device, but also for the protection of your own safety and health. Please read and follow them carefully. If you should pass the device to other people, do not forget to include this user guide.

In no event will liabilities be taken for consequential, incidental, direct or indirect damages resulting from improper use of the device according to the user guide. The warranty expires, if the instructions in the user guide are not followed.
This product is not a toy and not suitable for infants and Infants and children cannot assess the risks involved, when dealing with electrical devices. This product contains small parts, which should be kept out of reach of young children and babies. Do not leave the packaging material lying around. Children might play with the plastic bags and risk suffocation.
Keep this product away from water, dampness and high humidity to avoid the danger of short circuit or/and electric shock or/and damage to the product or/ and connected Keep this product away from vessels containing liquids, e.g., buckets, vases or plants. Liquids can enter the case/housing or the plug connectors. This unit may only be used in dry rooms.
There is no reason for the user to open this device. This unit may only be opened or repaired by a person authorized to do so or who has knowledge of electrical safety regulations.
Always use a soft, dry and lint-free cloth to clean the unit’s If the device is extremely dirty you can use a soft cloth, dampened with water or a mild cleaning solution to clean.
If you have any doubt about the approach, the security, the handling or the correct connection of the device, or questions should arise which are not clarified in the course of this user guide, please turn to an authorized dealer or contact our technical information.

Cleaning and maintenance

DANGER
Always use a soft, dry and lint-free cloth to clean the unit’s exterior. If the device is extremely dirty you can use a soft cloth, dampened with water or a mild cleaning solution to clean.
Never use any abrasive or harsh cleaning agents (e.g. alcohol, petrol or thinners) as these could damage the controls, casing or any markings and labels found on the device.

Specifications

Power Supply| 230 V~/50 Hz | 240 V~/50 Hz
---|---
Maximum current| max. 16 A
Wide voltage range| 230 V to 250 V
Display Range|

Time: 0 seconds 9999 days
Power: 0 W 9999 W
Voltage: 0 V 9999 V
Current: 0.000 A 9999 A
Frequency: 0 Hz 9999 Hz
Price: 0.00 cost/KWh 99.99 cost/KWh
Energy: 0.000 KWh 9999 KWh
Cost: 0.00 cost 9999 cost

Box contents

Inspector III; Instruction manual

Connection

Plug the Inspector III to a correctly installed mains socket
Input your price per kilowatt/h
Connect the devices you want to monitor with the Inspector III

The word OVERLOAD will appear as warning on the display if the power consumption of the connected device exceeds 3680 watts.

Functions

To switch through the different values in the display press FUNCTION. LCDwindow 1 shows the elapsed time in which the attached device has been using electricity. First, the two digits on the right show seconds and the ones on the left show minutes. After 60 minutes, the digits on the right display minutes and the digits on the left now show hours. After 24 hours the display starts again at zero and the day display is increased by one.

Note: The measurement may have a deviation of +/ 2%. Please note that the time recording will only start at approximately 0,1 watts usage by the attached device.

Mode 1)
Time/Consumption/Cost

Window 2: Shows the wattage currently used.
Window 3: The total cost of the electricity used (COST).

Mode 2)
Time/Electricity Used/Days

Window 2: The total use in kilowatt hours (KWh).
Window 3: How many days the attached device has been connected and has been using power (DAY).

Mode 3)
Time/Voltage/Frequency

Window 2 : The current voltage (V).
Window 3 : The current frequency in hertz (Hz).

Mode 4)
Time /Ampere/Power Factor

Window 2 : The actual power consumption in ampere (A).
Window 3: The current power factor (POWER FACTOR). The factor value can range from 0.00 to 1.00 and is equivalent to the cos φ.

Mode 5)
Time/Lowest Consumption

Window 2: The lowest registered wattage during use (W).
Window 3 : The display „Lo“.

Mode 6)
Time/Highest Consumption

Window 2: The highest registered wattage during use (W).
Window 3: The display „Hi“.

Mode 7)
Time/Price

Window 3 : The input price per kilowatt hour (COST/KWh

Inputting the price

Please look at your electricity bill or ask your local electricity supplier, what your price per kilowatt hour is.

Press FUNCTION till you get to the Mode 7 Time/Price.
Press the COST button till the display starts
With the FUNCTION button you can now adjust the digit you want to
With the buttons UP/DOWN you can adjust the value at the selected
five seconds without any input or pressing COST will exit the input mode.

From this moment on all calculations are made based on the price that has been input and will be added to the saved costs.

Tips to save energy

The price entered should always be uptodate.
Monitor the power consumption of a device for a week to get a good average and multiply the cost with 52 to estimate the cost of the device per year. Find your household “power hogs”! Check the amount of electricity that your devices consume. Most TV’s and electronic devices have a so called “standby” mode. When not in use, switch off these devices fully to save costs. Even when the rinse and spin cycle of your washing machine has been completed, hose and temperature sensors still require and consume an unnecessary amount of electricity. The easiest way to fight unnecessary power consumption is to simply use a multiple socket outlet with a switch.

Reset

Reset will reset all values to factory values. All saved and accumulated data are deleted. A total reset is sometimes needed when:

You want to delete all
The device is showing no

Press the RESET button carefully with a blunt object. After a short moment the display will show mode 1.

Disposal

Electrical- and electronic devices must never be disposed of in the regular household waste!

Consumers are legally obligated and responsible for the proper disposal of electronic and electrical devices by returning them to collecting sites designated for the recycling of electrical and electronic equipment waste. For more information concerning disposal sites, please contact your local authority or waste management company.
Do not throw batteries and rechargeable batteries into the household waste!
Customers are legally obliged to return used and rechargeable batteries, whether they contain harmful substances* or not, designated disposal sites or collecting sites in shops selling batteries. By doing so you are contributing to a better and cleaner environment.

Identification mark Cd= Cadmium; Hg= Quick silver; Pb= Plumb

LIVED NON FOOD GMBH, ALL RIGHTS RESERVED.

No liability will be taken for modifications or mistakes regarding the technical data or product features described in this user manual. All rights reserved. Any reproduction, transfer, duplication or filing of this user manual or parts of it, as well as the translation into a foreign language or computer language is prohibited without the explicit approval of the manufacturer. Due to the fast advancement of these products, no guarantee of completeness can be given.
Modifications in technique and configuration are subject to change at any time. To receive a digital copy of this user manual, please contact our service department.

GUARANTEE AND SERVICE CONDITIONS.

You receive a voluntary 2-year manufacturer guarantee, starting at purchase date, for material and production defects of the product. This guarantee is applicable in Germany, Austria and Switzerland. The receipt counts as a proof of guarantee. Within the guarantee period we will repair all material and manufacturer defects free of charge. Your statutory warranties remains unaffected by this guarantee.

THE GUARANTEE DOES NOT COUNT:

in case of damages which have arisen after improper use
for wear parts / accessories that are subject to natural wear and tear
for defects that are known to the customer at purchase
- in case of damages that occurred due to repair or interventi- on of the buyer or an unauthorized third party
  - in case the device was connected to a higher voltage as stated on the device
  - when dropping the device or single elements of it
  - for improper transportation or packaging
  - damages that occurred due to force majeure
  - for non-observance of valid safety precautions
  - for non-observance of the manual

BATTERIES / RECHARGEABLE BATTERIES ARE NOT COVERED BY THE GUARANTEE AS THEY ARE PARTS OF CONSUMPTION.

In case of a guarantee claim, the date of sale has to be proven by receipt or invoice. Replacements for reasons covered by the guarantee do not lead to an extension of the original guarantee period, neither for the device itself nor for any replaced components. If you are claiming a valid guarantee, we are entitled to choose whether we will repair the device free of charge or exchange it for a new device. Any further claims are excluded. Parts replaced will pass into our property. We reserve the right to change defective parts or products against follow-up models.

Please always contact us before you return your product. Provided that a return shipment has been agreed, send the defective product securely packaged at your own cost to our service department. It is absolutely necessary that you add a copy of your receipt to your return shipment. Repairs carried out after the guarantee period are subject to a charge. We will not accept freight collect shipments and will return them to the sender.

Customer Support & Service

Service Adresse | Service address
Lived non food GmbH | Friedrich-Seele-Str. 20
DE-38122 Braunschweig Telefon: +49 (0) 531 224356-82 | service@x4-life.de