FRYMASTER SHS Sandwich Holding Station User Guide
- June 4, 2024
- FRYMASTER
Table of Contents
FRYMASTER SHS Sandwich Holding Station
Product Overview
Operation
- Press the power button. LO is displayed until the air heater and heater plate are within 15°F (9°C) of setpoint.
- Ready is displayed.
- Unit is ready for use.
Fahrenheit to Celsius Display
- Unplug unit from power supply.
- Press and hold either temperature bulb button.
- Plug unit back into power supply with button depressed.
- S T O R is displayed.
- Release the temperature button.
- Press the power button.
Setting Temperature
- Turn the SHS controller OFF.(nothing in the display).
- Press , then enter 1, 2, 3, 3. Use the numerals in the upper right-hand corner of each key.
- SET is displayed.
- LEDs on the Heater Plate button (1) and the Air Heater button (4) light .
- Press the button that corresponds to the heater you want to adjust.
- Press the Up and Down arrow keys to adjust the set-point temperature.
- Press the Check button once. Both heater LEDs will again light.
- Follow the same steps to adjust the temperature of the other plate.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>