Paxton ins-30231 PaxLock Pro User Guide
- June 3, 2024
- Paxton
Table of Contents
ins-30231 PaxLock Pro
User Guide
http://www.paxton.co.uk/productfinder.asp
ins-30231 PaxLock Pro
Net2
Paxton10
Standalone
+44 (0)1273 811011
support@paxton.co.uk
paxton.support| + 877.438.7298
supportUS@paxton-access.com
usapaxton.support
---|---
+31 (0)76 3333 999
support@paxton-benelux.com
paxton.benelux.support| +32 (0)
78485147
support@paxton-benelux.com
paxton.benelux.support
+49 (0) 251 2080 6900
verkauf@paxton-gmbh.de
paxton.gmbh.support| +33 (0)1 57 32 93 56
support@paxtonaccess.fr
paxton.support
** +27 (0) 21 4276691
support@paxtonaccess.co.za
paxton.support| + 8000 3570 3783
support@paxtonaccess.ae
paxton.support
**+52 55 5351 3667
soporte@paxton-access.com
paxton.soporte| +57 1508 8198
soporte@paxton-access.com
paxton.soporte
+44 (0)1273 811011
support@paxton.co.uk
paxton.support
These products are not suitable for retail sale. All warranties are invalid if these products are not installed by a competent person. Parts of this product are Copyright (c) 2013-2015 Atmel Corporation. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- The name of Atmel may not be used to endorse or promote products derived from this software without specific prior written permission.
- This software may only be redistributed and used in connection with an Atmel microcontroller product.
THIS SOFTWARE IS PROVIDED BY ATMEL “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
UL 294 performance level table:
| Feature | Level |
|---|---|
| Destructive Attack | 1 |
| Line Security | 1 |
| Endurance | 4 |
| Standby Power | 1 |
| Single Point Locking Device with Key Locks | 1 |
Product compliance and limitations
Wiring methods shall be in accordance with the National Electrical Code
(ANSI/NFPA70), local codes, and the authorities having jurisdiction.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
http://paxton.info/1606
© Paxton Ltd 1.0.1