OMTech LRA-6000-00 Laser Engraving Rotary Axis Instruction Manual
- June 3, 2024
- omtech
Table of Contents
OMTech LRA-6000-00 Laser Engraving Rotary Axis
Safety Information
- Keep this device clean and free of potentially flammable or reflective dust and swarf.
- DO NOT place body parts in or near the engraving path.
- ALWAYS wear appropriate personal protective equipment such as protective eyewear when operating your laser. If this device is being used on an open bed, it is also recommended to secure the worksite or erect protective screens around the laser path to prevent injury to passersby.
- DO NOT use this device with items too wide for its chuck or too long for its rail.
- DO NOT assemble or disassemble this device without proper training.
Specifications
Input Voltage | 24 V |
---|---|
Base Length | 3.7 in. (9.5 cm) |
Base Width | 4.7 in. (12 cm) |
Chuck Diameter | 3.1 in. (8 cm) |
Chuck Clamping Range | 0.8–2.8 in. (2–7 cm) |
Product Dimensions | 8.3×4.7×6.5 in. (21×12×16.5 cm) |
Net Weight | 10.6 lb. (4.8 kg) |
Installation
Connect the rotary device’s connection to the Y-axis port inside the engraver or the rotary axis port behind your engraver.
Operation
- Expand the chuck’s clamp by inserting its key and turning counterclockwise.
- Place your workpiece into the chuck. Secure it in place by closing the chuck around it, turning the check key clockwise.
- Use your engraver’s control panel or your engraving software to add your design
Maintenance
- Clean this device with a soft moist cloth to remove any dust or debris that may accumulate. Allow time for any moisture to air dry before further use.
- Apply a thin layer of lubricant to the chuck and spindle bore after cleaning
Contact Us
Thank you for choosing our products! If you have any questions or comments,
contact us at
help@cs-supportpro.com and we’ll resolve your issue
ASAP!
For a .pdf copy of the latest version of these instructions, use the
appropriate app on your smartphone to scan the QR code to the right
References
Read User Manual Online (PDF format)
Loading......