EKV005 Wireless Headphones User Manual

EKV005 Wireless Headphones

PRODUCT OVERVIEW

SET UP

1. Use the 5V/1A power adaptor to connect base station for power up.
2. Hold the power button for at least 3 seconds to power up the headphone, and will see the LED indicator on headphone and base station turn to solid blue.

3.5mm Audio Source
Use the RCA to 3.5mm cable connect your TV
(RCA output Jack/3.5mm headphone jack) to base station(AUX Input Jack).

Optical Audio Source

1. Use the optical cable connect your TV( optical output) to base station(optical input).
2. Select the audio output to optical in your TV setup menu.

POWER ON/OFF

PAIRING

1. Hold the power button for at least 3 seconds to power up the headphone, and you will see the blue LED indicator blinking.
2. Turn the power switch on base station, the LED indicator blink and turn blue. The paring will be done.
3. Pairing will be completed automatically and there will be no need to pair again for use.

Connect to TV by AUX

1. Use the adapter to power up the wireless transmitter(base station).
2. Use the RCA to 3.5mm cable to connect your TV (RCA output Jack) to wireless transmitter(AUX In).
3. After connecting with AXU, please turn the audio source switch to AUX in.

Connect to TV by Optical

1. Use the adapter to power up the wireless transmitter(base station).
2. Use the optical cable to connect your TV (optical output Jack) to wireless transmitter(optical In).
3. When connect with optical in, please turn the audio source switch to optical in.

NOTE:

1. After connecting optical in, please ensure the LED above the optical port is blue. If not, press the button A/B to OPTICAL In.
2. “Dolby/DTS” is not supported. When using TV optical out, set audio format to “PCM”.

A. Samsung TV path settings

1. PCM format: Settings —-> Sound —-> Expert Settings —-> Audio Format–, PCM
2. External speakers: Settings —-, Sound —-, Select Speaker—-, Optical

B. LG TV path settings

1. PCM setting path: Menu —-, All Settings —-, Sound Out—-, Optical —-, Digital Sound Out—-, PCM
2. If you need to synchronize the output of the TV speakers and fiber: Menu —-, All Settings —-, Sound Out —-, Optical —-, Internal TV Speaker+ Optical

CHARGING

1. You can hang the headphone to the base station for charging, make sure that the headphone and the base are in correct contact.and the charging indicator light is on.
2. You can also charge the headphone to use the micro-USB cable to the charging port on the headphone, and plug the other end into any USB power source(5V/1A).
3. Charging LED indicator will turn red when charging, will turn off when charging full.

HEADPHONE 3.5mm INPUT INTERFACE

The headphone has a 3.5mm headphone jack, which can be directly connected to a 3.5mm mobile phone using a 3.5mm audio cable.
Note: When using a 3.5mm audio cable to connect headphone, the volume buttons of headphone cannot adjust the volume.

Warranty
Thanks for using EKLEVOR product,EKLEVOR products come with warranty of 18 months from the day of purchase, if you need any support, please feel free to contact us.
Contact:
Email:eklevorservice@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>