Lifelong LLTM09 FitPro Motorised Treadmill User Manual

Lifelong LLTM09 FitPro Motorised Treadmill

INTRODUCTION

Dear Customer,
Congratulations! We welcome you to the Lifelong family, as you welcome our Lifelong Fit Pro Treadmill to be a part of your home. At Lifelong, our products are carefully built for the needs of India, which is why we have crafted a diverse range of innovative products, across a spectrum of categories – Home, Kitchen, Grooming, Fitness, Lifestyle and Smart Home, to better help you. We then deliver them at the best prices, enriching your everyday living. We are sure you can’t wait to start using your new Lifelong Fit Pro Treadmill. We know we can’t! Looking forward to building our bond for life, cheers! Thank you, Team Lifelong.

ABOUT THE PRODUCT

Lifelong Fit Pro combines power and elegance to take your fitness journey to the next level. It is the perfect machine for losing weight or increasing endurance.

MARKING OF PRODUCT

Main Parameters And Parts List

Packing List
No.| Name| Units| Qty
1| Complete machine| set| 1
2| Supporting base| pc| 2
3| Accessory Bag| pc| 1
Accessory Bag List
No.| Name| Qty
1| Inner hexagon spanner 5mm| 1
2| Inner hexagon spanner 6mm| 1
3| Combination wrench| 1
4| Safety key| 1
5| Silicone oil| 1
6| User manual| 1
7| MP3 cable| 1
8| Screw M825| 2
9| Screw M612| 4

PRECAUTIONS BEFORE USE

• This Treadmill is for indoor usage only, avoid moisture and dust.
• Please wear suitable clothes and sneakers before exercise. It is prohibited to exercise on the treadmill barefoot.
• Keep children away from the machine to avoid accidents.
• Avoid overloading or using it for an exceedingly long time, otherwise it could cause damage to the motor and controller and will accelerate the deterioration of treadmill, running belt and running board. It is advised to maintain the machine on a regular basis.
• Please maintain good ventilation while running.
• Please clamp the security lock cable on your clothing to make sure the machine stops at emergency condition.
• If the power cord is damaged, please contact our qualified maintenance personnel for service rather than disassembling it at your own discretion. If you feel any pain or iscomfort, please consult your physician.
• Do not use the machine when the power cord is damaged or the power plug pin is loose, otherwise will lead to an electric shock, short circuit, or fire.
• Do not damage or bend the power cord by force or reverse it.
• Do not place heavy objects on the machine, do not clamp the power line.
• Machine should not be used by more than 1 person at the same time.

INSTALLATION INSTRUCTIONS

When installing, simply fix all the screws first, then tighten the screws only when the installation of the frame is done.

1. Put the machine flat on the ground. Remove the knob in the direction shown, in the picture below. Keep the columns and console in the direction shown in the picture below.
2. Remove the preinstalled screws M822 on the supporting frame and then tighten the supporting frame with screw M612 on the base. Use #6 hexagon wrench and screw M6*12 to lock and fix the base (two screws for each side).
3. Hold left & right columns, use #6 hexagon wrench and screw M8*25 to lock the console frame on the columns (Tighten all screws in above steps, and please notice not to clamp the cable by column).
4. Use the knob in step 1 to lock the main base and columns (Rotate clockwise, please refer to the direction marked by the arrow mark). The uneven ground may cause trouble when rotating the knob, please lift the column slightly to the left side (as shown below). To fold the machine easily next time, please do not rotate the knob too tightly.
5. Put the safety key in the area shown in the picture, then press the start button to start the treadmill. (Notice: The treadmill can only start when the safety key is put on the yellow area marked on the console.)

NOTE: please confirm that all screws are locked uniformly according to the requirements after installation, and check that no part is left out before plugging into an outlet. Folding Instructions (Massager for option) When the treadmill is not in use, you can lift the running deck and then use knob to lock the running deck and base, as shown in the picture below.

OPERATING INSTRUCTIONS

Please hold the running deck with your right hand before unfolding the treadmill and use your left hand to remove the knob (in the counter clockwise direction), then lower the running deck slowly and install the plum lock back. This treadmill comes with 2.5 HP peak motor.

1. Using treadmill: Insert the power plug properly and turn on the switch (in red colour) When the light is on, there will be a beep sound, and then the screen will light up.
2. Safety key Introduction: The treadmill can only start when the safety key is put on, in the yellow area of the console. Clip the safety key on your clothes when using the treadmill to prevent accidents. Put the safety key back when not using the treadmill.
3. Console instructions Overlay.

BUTTON INSTRUCTIONS

• Start: When the treadmill is in a standby condition, press “Start” to start the treadmill Stop: When the treadmill is running, press “Stop” to stop the treadmill. All the data will be cleared, and the treadmill goes to manual mode.
• Program: In standby mode, press Program to change the options from manual mode to automatic programs. Manual mode is the system default running mode.
• Mode: On standby mode, press “Mode” to switch to different countdown running modes,(time countdown running mode, distance countdown running mode and calorie countdown running mode). When choosing any mode, speed adjustment buttons can be used to set the value. Press “Start” to start the treadmill after setting the value.
• Play/Pause: When playing music, press Play/Pause to pause the music, and press the button again to play music again.
• Volume + /-: Can be used to adjust the volume. Press Volume +/- to increase or reduce the volume.
• Speed +/ -: Can be used to adjust the speed of the treadmill.
• Speed direct selection: When the treadmill starts, press 3, 6, 9 buttons to change the speed directly.

DISPLAY FUNCTION

• Speed display: Displays the current running speed value.
• Time display: Displays the time of manual mode and the countdown time under automatic modes and programs.
• Distance display: Displays cumulative distance under manual mode and programs. Displays the distance countdown in automatic mode.
• Calorie display: Displays cumulative calories under manual mode and programs. Displays the calorie countdown in automatic mode.
• Heart rate display: Heart rate signal will be detected, and the screen shows the heart rate count.
• Heart rate function(optional) : In case the treadmill is energized, hold the heartbeat sensor piece for a while and the heart rate will be shown on the screen. (This data is for  reference only; it cannot be considered as medical data.)

DEVICE MAINTENANCE

Cleaning

• Comprehensive cleaning will extend the life of the electric treadmill. Remove dust periodically to keep the parts clean. Be sure to clean both sides of the running belt’s exposed portion as well.
• Make sure to wear clean athletic shoes to avoid carrying the dirt onto running board and belt.
• Treadmill belts should be cleaned by a damp cloth with soap. Please pay attention to avoid spilling any liquids on the electrical components and running belt.
  Note: Before cleaning or maintaining products, please ensure that the power plug of the treadmill is pulled out. Clean the motor at least once a year.

Running Belt Alignment

• Put the electric treadmill flat on the ground.
• Make the treadmill run at a speed of about 6-8km/hour.
• If the running belt leans to the right, rotate the adjusting bolt to the right half a turn clockwise, then rotate the left adjusting bolt half a turn counter clockwise. (Picture A)
• If the running belt leans to the left, rotate the left adjusting bolt half a turn clockwise, then rotate the right adjusting bolt half a turn counter clockwise. (Picture B)

Silicon oil for belt’s maintainance

• Step 1: Lift the running belt slightly.
• Step 2: Open the silicone oil bottle, spray the silicone oil on the sides of running board, as shown in the following figure:

RUNNING BELT ADJUSTMENTS

When you use the treadmill for a long time, the running belt or the multi- wedge belt becomes loose because of the abrasion. To facilitate the safe use, appropriate adjustment is needed.

Judgement
The feeling of running with the occasional pause phenomenon, which indicates that the treadmill belt or multi-wedge belt is a little loose then further affirmations need to be made.

• Step 1: Remove the motor cover, make the treadmill run at a speed of 1 km/h, and then stand on the running belt, hold the handlebar, and tread the treadmill belt slightly.

  • A. If the instantaneous step cannot stop the belt, then the tightness is appropriate.
  • B. If your instantaneous step stops the running belt, but the multi-wedge belt and front roller are still running, it indicates that the running belt is loose and appropriate adjustments must be made to facilitate the safe use.
  • C. If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt stop, but the motor is still running, it indicates that the multi-wedge belt is loose and appropriate adjustments must be made to facilitate the safe use.

• Step 2: Use a wrench to adjust the screws on the motor base according to the condition. Meanwhile, gently flip the multi-wedge belt between the motor shaft and the front roller, if it is too loose, you can flip the multi-wedge belt by 100%; if it is too tight, the degree to flip the belt is limited. It is appropriate to flip the multi-wedge belt by 80% after adjustment. Please adjust the tightness of the multi-wedge belt into the state that it could be
  flipped by 80%.

• Step 3: Finally lock the motor base and re-install the motor cover.

DOS AND DON’TS

• Do not use the machine in the status of a shell break in or break off (the internal structure exposed) or under the condition wherein the welding-parts may fall off, otherwise an accident or injury can happen.
• Don’t jump up and down in the process of movement. It may cause injuries.
• Don’t keep machine in or near moist area such as the bathrooms.
• Do not place the machine in direct sunlight, or elevated temperature places such as near a stove or a heating appliance. It may cause leakage and may burst into flames.
• Don’t use when the power cord is damaged or power plug pin is loose, otherwise will lead to an electric shock, short circuit, or fire.
• Don’t damage or bend the power cord by force or reverse it. Do not place heavy objects on the machine, do not clamp the power line, otherwise will cause fire or an electric shock.
• Machine should not be used by more than 1 person at the same time. Do not go close to the machine when it is in use. It may cause an accident or injury.
• Avoid drinking water or pouring water when machine is in operation. It may cause electric shock and fire.
• People who do not exercise frequently should not suddenly do intense exercise.
• Do not use this machine, after eating or when tired.- Do not use the machine in the status of a shell break in or break off (the internal structure exposed) or under the condition wherein the welding-parts may fall off, otherwise an accident or injury can happen.
• Don’t jump up and down in the process of movement. It may cause injuries.
• Don’t keep machine in or near moist area such as the bathrooms.
• Do not place the machine in direct sunlight, or elevated temperature places such as near a stove or a heating appliance. It may cause leakage and may burst into flames.
• Don’t use when the power cord is damaged or power plug pin is loose, otherwise will lead to an electric shock, short circuit, or fire.
• Don’t damage or bend the power cord by force or reverse it. Do not place heavy objects on the machine, do not clamp the power line, otherwise will cause fire or an electric shock.
• Machine should not be used by more than 1 person at the same time. Do not go close to the machine when it is in use. It may cause an accident or injury.
• Avoid drinking water or pouring water when machine is in operation. It may cause electric shock and fire.
• People who do not exercise frequently should not suddenly do intense exercise.
• Do not use this machine, after eating or when tired.

TROUBLESHOOT CHART

E1

| Abnormal communication: when the power is on, the connection between lower controller and the console is abnormal.| Possible Cause: The communication between the lower controller and console is blocked, check each joint between the controller and console, ensure that each core is fully plugged in. Check the connection line, replace it if it’s damaged.

E2

| ****

No signal from motor.

| Possible Cause: Check the motor cable to see whether it is connected well or not, if not, connect the motor wire again. Check the motor cable

to see whether it is damaged or has a burnt smell, if yes, replace the motor. Check the speed sensor to see whether it is correctly installed or damaged.

E5

| Over-current protection: In working, the lower controller detects the current to be over 6A for more than 3 seconds.| Possible Cause: Overloading leads to excessive current, and the system stops out of self-pro tection, or some part is stuck, causing the motor to stop. Adjust the treadmill and restart it. Check if there is liquid or burnt smell while the motor is running, if yes, replace the motor; check if the controller has a burned smell, if yes, replace the controller; check the power supply voltage, if it does not match the specifications, change into correct voltage and test the machine again.

E6

| Explosion-proof impact protection: the abnormal voltage or motor cause the fault in circuit which drives the motor.| Possible Cause: Check if the power supply voltage is 50% lower than normal voltage, use the correct voltage and test the machine again check if the controller has a burnt smell and replace the controller; Check if the motor cable is connected and connect the motor wire again.
E7| No safety key.| Insert the safety key in the right place.

Terms and Conditions:

1. This warranty is void if:

   • The completely filled warranty card is not presented at the time of servicing the product.
   • The product is not operated according to the instructions given under the user manual.
   • Damages are caused by lightning, abnormal voltage, water or other liquid intrusion, fire, flood, accident, negligence or improper handling.
   • Product has been damaged due to installation, epairs, alterations or modifications by unauthorized service organizations or persons.
   • Product label specifying the model number, serial number and production code has been removed and altered.
   • Defects or parts requiring replacement due to ordinary wear and tear, corrosion, rust or stains, scratches, dents on the casing or paintwork of the product.
   • Claims damaged and/or missing parts (accessories) after 7 days from the original date of goods received.
   • Defects or faults in product which have been used for commercial/industrial purposes or which have been rented/leased or have been otherwise subject
     to non-household/non-domestic use.

2. Repairs or replacements will be carried out by authorized service provider.

3. During the limited warranty period, Lifelong or its authorized service provider will repair without charge the defective unit inclusive of labor and parts and restore the unit to its optimum working condition. All defective parts used for the warranty repair should be surrendered to Lifelong and/or its authorised servicer.

4. All expenses incurred in collecting the unit (s) or part(s) thereof from authorised service provider as will as any other expenses and incidentals will be borne by the consumer.

5. Lifelong obligations are limited to the repair and replacement of the defective product. Except as set forth above, there are no other express or implied warranty and all warrantied, conditions or other terms implied by statute or common law (including any warranty of satisfactory quality, merchantability or fitness for a particular purpose) are excluded to the fullest extent permitted by the lass.

6. Lifelong total liability for damages relating to or arising out of the purchase or use of the product regardless of the type or cause of such damage of the form of characterization of the claim asserted (e.g. contract or tort) shall not exceed the original purchase price paid for the product.

7. However in no event shall Lifelong and Lifelong authorized distributors be liable for any punitive, special incidental, indirect or consequential losses or damages whatsoever (including without limitation, damages for the loss of revenue, business, profits, goodwill, or contracts, business interruptions, loss of business information or any other pecuniary loss.) Whether or not Lifelong has been advised of the possibility of such damages.These limitations shall apply not with standing the failure of the essential purpose of any limited warranty. This limited warranty does not affect consumer’s statutory rights under the law.

8. No carrier, dealer or employee is thereof authorized to make modifications to this warranty and you should not reply on any such representation. Lifelong reserves the right to amend the terms and conditions if necessary.

Consumer Warranty Card

Dear Customer, Thank you for choosing a Lifelong consumer product. All Lifelong Consumer products are designed and manufactured to the highest standards to deliver high quality performance, as well as easy installation and use. At Lifelong, we believe in providing not only service, but adding value to your purchase. The warranty has therefore been designed especially for you with your interest at heart.

Warranty Service

• All Lifelong consumer products are covered against manufacturing defects from them date of purchase.
• Name of the product:
• Model:
• Warranty coverage: 1 year
• Please note: Purchase receipt is necessary for warranty verification.
• Customer Care: customercare@lifelongindia.com

Customer Details

• Name:
• Address:
• Home Number:
• Office Number:
• E-mail Address:

Product Details

• Model No.:
• Serial No.:
• Purchase Date:
• Invoice Number:
• Online Site:

Please log on to www.lifelongindiaonline.com and complete the online warranty form with your personal and product details within 14 days.

References

• Lifelong | Lifelong India Online – Lifelong Online

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>