WILTRONICS GT4281 1:32 Scale Mini High Speed RC Car User Manual

June 3, 2024
WILTRONICS

WILTRONICS logo

WILTRONICS GT4281 1:32 Scale Mini High Speed RC Car

WILTRONICS GT4281 1 32 Scale Mini High Speed RC Car

PACKING LIST

WILTRONICS GT4281 1 32 Scale Mini High Speed RC Car 1

Battery installation and charging of remote control car and remote control
Connect the battery to the USB cable, plug the USB cable into the USB port of the computer or the USB charger, and tum on the power. When the red light is on, it means
charging. When the red light is off, it means fully charged.

WILTRONICS GT4281 1 32 Scale Mini High Speed RC Car 2

Battery installation method of remote control

  1. Open the battery cover on the bottom of the remote control
  2. Install 2 1.5V “AA” batteries with correct polarity and close the battery cover.

WILTRONICS GT4281 1 32 Scale Mini High Speed RC Car 3

WILTRONICS GT4281 1 32 Scale Mini High Speed RC Car 4

Function of remote control

Distributed by:
Electus Distribution Pty Ltd
46 Eastern Creek Dr,
Eastern Creek NSW 2766 Australia
Ph 1300 738 555
Int’l +61 2 8832 3200 / Fax 1300 738 500
www.electusdistribution.com.au

WILTRONICS GT4281 1 32 Scale Mini High Speed RC Car 5

Operation method

Turn the power switch of the remote control vehicle to the “ON” position. Put the remote control car on the plane, and then turn on the remote control switch. When the remote control indicator stops flashing, you may operate the control lever.
( Note: when the remote control indicator is flashing, the control lever can not be operated.)

WILTRONICS GT4281 1 32 Scale Mini High Speed RC Car 6

Basic operation diagram for product use

WILTRONICS GT4281 1 32 Scale Mini High Speed RC Car 7

  1. Pull the remote control lever backward to move the remote control car forward, and pull forward to move the remote control car backward. When Power switch the control lever is pulled backward half way, the High/ low remote control car will move forward slowly; when speed switch the control lever is pulled backward completely, the remote control car will move forward rapidly.
  2. If you turn the “right/ right steering wheel” clockwise, the car will turn right;
  3. The high / low speed button is in low-speed gear in default when leaving the factory. You press the switch button once and the car light flashes twice to switch to the high-speed gear, and then press the switch button once again to switch to the low-speed gear.

WILTRONICS GT4281 1 32 Scale Mini High Speed RC Car 8

Precautions

  • Please pay attention to the polarity when installing or replacing the battery;
  • Non-rechargeable battery can not be charged;
  • Charging a rechargeable battery should be supervised by adult;
  • Do not use old or new batteries or different types of batteries;
  • Please pay attention to the signal interference nearby during operation, otherwise the remote control distance will be affected;
  • When the remote control car slows down, it means that the car is out of power. Please charge the remote control car according to the above method.
  • If the remote control is out of power, the indicator will turn dark or does not light up. Please replace the battery with a new one.
  • If you do not use it for a long time, please take out the battery in the remote control, turn the power switch of the remote control car to “OFF” position, and take out the battery of the remote control car.

Recommendations
When the car is moving, please do not touch the wheels of the remote control car by hand, so as to avoid damage to the car.

WILTRONICS GT4281 1 32 Scale Mini High Speed RC Car 9

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals