arlo All-in-One Sensor with 8 Sensing Functions User Guide
- June 3, 2024
- Arlo
Table of Contents
arlo All-in-One Sensor with 8 Sensing Functions
Add an All-in-One Sensor to your Home Security System
After you install your Keypad Sensor Hub, you can use the Arlo Secure App to add All-in-One Sensors.
To install your All-in-One Sensor:
- Open the Arlo Secure App and tap Add Device or + if you have other devices.
- Follow the setup instructions for your All-in-One Sensor.
Note: The sensor is for indoor use only. The Arlo Secure App shows you how to separate and reattach the front module from the back housing. Do not attach the sensor adhesive unless the app instructs you to do so. If you’re using the sensor to detect water leaks, the adhesive isn’t needed.
What’s in the box
Note: Your sensor might not need a wall plate, depending on how it will be used. The Arlo Secure App explains this during setup.
Need help?
We are here for you.
Visit www.arlo.com/support for quick answers
and:
- How-to videos
- Troubleshooting tips
- Additional support resources
© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are trademarks of Arlo Technologies, Inc. Any other trademarks are for reference purposes.
(If this product is sold in Canada, you can access this document in Canadian French at arlo.com/docs.) For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/.
- Arlo Technologies, Inc. 2200 Faraday Avenue, Suite 150 Carlsbad, CA 92008 USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>