OTL TECHNOLOGIES Peppa Pig Karaoke Microphone with Bluetooth speaker User Guide
- June 3, 2024
- OTL TECHNOLOGIES
Table of Contents
OTL TECHNOLOGIES Peppa Pig Karaoke Microphone with Bluetooth speaker User Guide
SAFETY INSTRUCTIONS : Read all the instructions carefully before using the product and keep them for future reference.
- Do not immerse in water.
- Unsuitable for use by children under the age of 3 due to small parts which may cause choking.
- We recommend that children aged 3-7 are supervised by an adult whilst using the product, prolonged use is not advised.
- The device may become warm while charging.
- Set volume to low before turning on sound.
- Long-term exposure to loud noise may cause damage to eardrums or loss of hearing.
WARNING
- This product is not a toy.
- Do not disassemble, repair, or modify the microphone.
- Do not place product in or near fire to avoid danger, as it uses a lithium battery.
- Avoid storage at extreme temperatures, this can shorten the battery life and may affect the microphone.
- Keep the microphone dry and do not store the microphone in damp areas to avoid damage to the microphone.
- Avoid dropping the microphone as it may cause damage to the product.
CONTROL OVERVIEW
PAIR WITH BLUETOOTH DEVICES
Please ensure that the Bluetooth function has been turned on in the settings
of your Bluetooth enabled device. You must pair the microphone with a
Bluetooth enabled device before it can be used wirelessly.
You only need to pair your microphone to each Bluetooth enabled device once.
It will automatically reconnect to each device when turned on in its vicinity.
If two or more devices are available, the last device paired will be the one
that reconnects.
FIRST TIME USE/PAIR TO NEW DEVICE
The Bluetooth device should automatically start searching for the new play device (some may require you to select “search for/add new device”)
- On your Bluetooth device, go to “settings”–>“Bluetooth”–>turn on Bluetooth
- Turn the microphone on by pressing the power button for 3 seconds.
- The LED light will flash on and off to detect Bluetooth enabled devices near you and will enter pairing mode.
- “OTL MIC” will appear on the Bluetooth device list, select “OTL MIC” to establish pairing.
- When pairing is successful, the microphone will beep.
When you want to play audio from another Bluetooth device, disconnect the microphone from the original device and follow steps 1-5 to re-pair the microphone with a new Bluetooth enabled device.
HOW TO RECORD
- Connect the microphone to a smartphone*, audio device or laptop (see overview diagram for location) with Audio/recording cable (included).
- Open recording app and start recording.
- Some of the latest smartphones will require a separate adapter to connect the 3.5mm jack cable (not provided).
CHARGING THE MICROPHONE
Please charge your microphone before first time use.
- When the battery is low, please charge via the included USB cable. The charging time is approximately 2 hours and provides up to 6 hours of continuous operation.
- The light will be red during charging and will turn off once it is fully charged.
- When the battery is low, the microphone turns off automatically.
TROUBLESHOOT
If an error occurs with the microphone, please turn off the microphone and restart it. When the microphone power is low, the Bluetooth range may be affected. Please charge the microphone to avoid disruption during use.
Please see our website www.otltechnologies.com for general troubleshooting method instructions.
PRODUCT GUARANTEE AND SAFETY INFORMATION
WARRANTY:
This product is warranted against defective materials and workmanship.
If the warranty service is required, you should return the product to the
retailer from where it was purchased. If the item was purchased in the
United Kingdom, the guarantee period is for 12 months from the date of
purchase. If it was purchased in the EU, then the guarantee period is 24
months from the date of purchase.
WARRANTY CONDITIONS
-
This warranty is only valid if, when warranty service is required, the original invoice or sales slip is produced, and the serial number on the product has not been defaced.
-
The manufacturer’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.
-
Warranty repairs must be carried out by an authorised dealer or authorised service centre. No reimbursement will be made for repairs carried out by non-authorised parties, and any such repair work or damage to the product caused by such repair work will not be covered by the warranty.
-
This product will not be considered to be defective in materials or workmanship by reason that it requires adaptation in order to conform with national or local technical or safety standards in force in any country other than those for which it was originally designed and manufactured. This warranty will not cover, and no reimbursement will be made for, any such adaptation, nor any damage which may result from it.
-
This warranty covers none of the following:
• Maintenance and repair or replacement of parts due to normal wear and tear.
• Cost relating to transport, removal or installation of the product.
• Misuse (including the failure to use this product for its normal purpose) or incorrect installation.
• Damage caused by lightning, water, fire, Acts of God, war, public disturbances, or other causes beyond the control of the manufacturer. -
This warranty is valid for any person who legally acquired the product during the warranty period.
-
The consumer’s statutory rights under any applicable legislation, whether against the retailer or the manufacturer, and whether arising under contract or otherwise, are not affected by this warranty.
INFORMATION ON DISPOSAL FOR USERS OF WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (PRIVATE HOUSEHOLD)
This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general house hold waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
www.otltechnologies.com |
info@otltechnologies.com
Made in PRC
Oceania Trading Ltd/OTL Technologies
1B Yukon Road, London SW12 9PZ, UK
Hullenbergweg 278-308, 1101 BV Amsterdam, Zuid-oost, NL
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>