OTL TECHNOLOGIES OTL TWS EARPODS True Wireless Sound Earpods User Guide
- October 26, 2023
- OTL TECHNOLOGIES
Table of Contents
OTL TWS EARPODS
TRUE WIRELESS SOUND EARPODS
USER GUIDE
SAFETY INSTRUCTIONS:
Frigidaire Gallery Refrigerator Rev...
Frigidaire Gallery Refrigerator Review
- Read all the instructions carefully before using the product and keep them for future reference.
- Do not immerse in water.
- Unsuitable for use by children under the age of 3 due to small parts which may cause choking.
- We recommend that children aged 3-7 are supervised by an adult whilst using the product, prolonged use is not advised.
- The device may become warm while charging.
- Set volume to low before turning on sound.
- Long-term exposure to loud noise may cause damage to eardrums or loss of hearing.
PRODUCT OVERVIEW
MFB (Multi-
Function Button)
Charging
port
FIRST TIME USE
Take both earpods out from
the charging case, then put them back in the charging case to activate the
earpods. Note: Please charge your earmolds before first-time use.
PAIR WITH BLUETOOTH DEVICES
Turn the Bluetooth function
on in the settings of your Bluetooth-enabled device.
- Take both earpods out from the charging case.
- The LED indicator light will flash on one of earpods to detect Bluetooth-enabled devices near you and will enter pairing mode.
- “OTL TWS EARPODS” will appear on the Bluetooth device list, select “OTL TWS EARPODS” to establish pairing.
- When pairing is successful, the LED on both earpods will flash BLUE.
USE IT WITH YOUR OTHER DEVICES.
When you want to play audio from another Bluetooth device, disconnect the
earpods from the original device and follow steps 1-4 to re-pair the earpods
with a new Bluetooth-enabled device.
POWER ON
Take both earpods out from the charging case and both earpods will
automatically power on (make sure the charging case is charged).
POWER OFF
Put both earpods back into the charging case, it will automatically power
off.
CHARGING THE EARPODS
Insert the earpods into the charging case, the LED light will be solid RED
when charging. once fully charged, the LED light will be turned off.
CHARGING THE CASE
Please charge your charging case before first-time use. Ensure to charge via
the provided type C cable.
The LED indicator light will be flashing during charging and will turn on
solid once it is fully charged.
When the battery is low, only the left LED indicator light will flash.
CHANGING EAR TIPS
To remove an ear tip, pull firmly with your fingers at the base of the ear
tip.
To attach an ear tip, with your fingers at the base of the ear tip, push the
ear tip onto the connector until it clicks into place. For more tip sizes, see
the inside box.
PLAY / PAUSE
When listening to music, touch the right/left earpod twice to play/pause.
SKIP TRACK FORWARD/BACKWARD
Whilst listening to music, press the right earpod for 2 seconds to forward to
the next track or press the left earpod for 2 seconds to go backward to the
previous track.
VOICE ASSISTANT
Touch right/left earpod three times to activate voice assistant (i.e. Siri or
Google Assistant)
ANSWER CALL/HANG UP CALL
Touch the right/left earpod twice to answer the incoming call and touch twice
again to hang up.
REJECT CALL
Press the MF button on right/left earpod for 2 seconds to reject the incoming
call.
TROUBLESHOOT
If an error occurs with the earpods, please follow the steps below:
- Take one of the earpods out of the charging case
- The LED light will flash with BLUE and RED quickly, press the MF area for 6 seconds. The RED LED light will go off after 1 second.
- Put the earpod back into the charging case
- Take the other earpod out from the case and follow steps 1-3.
- Take both earpods out from the charging case, search for “OTL TWS EARPODS” from Bluetooth enable device while one earpod will flash RED and BLUE alternatively.
- When the earpods power is low, the Bluetooth range may be affected. Please charge the earpods to avoid disruption during use.
- Please see our website www.otltechnologies.com for general troubleshooting method instructions.
WARNING
- This product is not a toy.
- Do not disassemble, repair or modify the headphones.
- Keep the headphones dry and do not store the headphones in damp areas to avoid damage to the headphones.
- Avoid dropping the headphones as they may cause damage to the product.
- Do not insert a jack plug into electric sockets.
INFORMATION ON DISPOSAL FOR USERS OF WASTE ELECTRICAL & ELECTRONIC
EQUIPMENT (PRIVATE HOUSEHOLD)
This symbol on the products and/or accompanying documents means that used
electrical and electronic products should not be mixed with general household
waste. For proper treatment, recovery, and recycling, please take these
products to designated collection points, where they will be accepted on a
free-of-charge basis. Alternatively, in some countries, you may be able to
return your products to your local retailer upon the purchase of an equivalent
new product. Disposing of this product correctly will help to save valuable
resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest
designated collection point. Penalties may be applicable for incorrect
disposal of this waste, in accordance with national legislation.
www.otltechnologies.com
info@otltechnologies.com
Made in PRC
Oceania Trading Ltd/OTL Technologies
2 Dinsmore Road, London SW12 9PS, UK
Hullenbergweg 278-308, 1101 BV Amsterdam, Zuid-oost, NL