spex Power Recline Adapter Mount Installation Guide

June 3, 2024
spex

Power Recline Adapter Mount
Installation Guide Power Recline Adapter Mount
Installation Guide

Power Recline Adapter Mount

CAUTION: This is not crash certified and therefore it is not to be used for transportation uses.
This is a supplementary installation guide, for full information and warnings refer to Back Support User Manual provided with your Standing Powerchair Adapter Mount.
1a. Installation to Quantum TRUBalance 3 (TB3):
Attach Mount to Quantum TB3 back plate using M6 x 16mm countersink screws and 5mm spacers provided in the fastener kit. Use a 4mm hex key to firmly tighten the screws.
spex Power Recline Adapter Mount fig 1 1b. Installation to Sedeo Pro:
Attach Mount to J3 Fixed Back Adapter Pro using M6 x 16mm countersink screws and 5mm spacers provided in the fastener kit. Use a 4mm hex key to firmly tighten the screws.
spex Power Recline Adapter Mount fig 22. Attach Back Support to Mount using M6 x 12mm button screws and M6 washers provided in the fastener kit.
Use a 4mm hex key to tighten the screws.spex Power Recline Adapter Mount fig
3

Spex Ltd
solutions@spexseating.com
32 Detroit Drive, Rolleston 7675
New Zealand
Call +643 307 9790
Fax +643 307 2820
www.spexseating.com
Manual: PowerReclineMount20221026

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals