sangoma P310 and P315 Phones User Guide
- June 3, 2024
- SANGOMA
Table of Contents
P310 and P315 Phones
User Guide
Conference (3-Way Call)
During a call, press the Conference softkey. Dial the third participant’s number, or use Contacts. Press the Conference softkey to connect all participants. To split a conference into separate calls with each participant, press the Split softkey and select the participant to drop from the call.
Contacts
Contacts are used for rapid dialing, and for finding detailed information
about someone. You can use Contacts from within Transfer and Conference. To
see the Detail page for a contact, press the Show softkey in a list of
contacts. Details include the person’s Status. Your contacts can also define
your Rapid Dial Keys. Use the Web Suite (Features > Phonebooks > Phonebook
Options) to define those User Keys. A P310 or P315 phone may only map a single
Rapid Dial entry to Line 2, if that line is otherwise unused for a SIP line.
Dialing Calls
Pick up the handset, or press a line key and dial a number. Or, dial a number and press the Dial softkey. You can also use Contacts or Call Log to find the number you want, then press the Dial softkey. If you use Contacts, you can dial a coworker’s Voicemail.
Hold
During a call, press Hold. The line key flashes red. Press either the
flashing line key or the Resume softkey to resume the call.
Info
Press the Info softkey followed by a line key to display a detail page for
that key.
Menu
The menu application is accessed using the Menu softkey. It contains
configuration and information screens for your phone.
Park
During a call, press the Park softkey. Then you or a coworker can answer
the call from another phone by either dialing that Parking extension or by
pressing the Parked Calls softkey and answering the call. From the idle
screen: press the More… softkey, then Parked Calls .
Receiving Calls
Pick up the handset, or press a softkey: Answer, Ignore, Transfer, or Send
VM. Ignore makes the call stop ringing but uses your Call Rules. Transfer lets
you transfer the call. Send VM sends the call to your voicemail regardless of
your Call Rules.
| 1.MWI | 9.Headset |
|---|---|
| 2.Softkeys | 10.Redial |
| 3.Messages | 11.Speaker |
| 4.Navigation Pad | 12 Transfer |
| 5.Confirmation | 13.Volume |
| 6.Cancel | 14.Keypad |
| 7.Line & Rapid Dial | 15.Mute |
| 8.Hold |
Redial
Press the Redial button to redial the last call you made. (If you have
multiple lines, Redial automatically uses the correct line.)
Status
Press the Status softkey to change your status. Do Not Disturb sends
incoming calls to your voicemail (and declines queue calls). Your coworkers
see your Status on their phone or Switchboard. You can use Call Rules to
manage incoming calls based on different Status Options.
**Transfers
**
- Assisted- During a call, press the Transfer button. Enter a number or press the Contacts softkey to find a number. Press the Dial softkey. When someone answers, inform them of the call to be transferred. Press the Transfer softkey, and the transfer is completed.
- Unassisted (blind)- During a call, press the Transfer button. Enter a number or press the Contacts softkey to find a number. Press the Transfer softkey, and the transfer is completed.
- Transfer to Voicemail- If you used Contacts for a transfer, you can press the Transfer VM softkey instead of Transfer. That transfers the call to that contact’s voicemail.
Voicemail Press the Messages button to dial your voicemail extension.
100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada I +1
256-428-6000 or 1 (877) 344 4861 (toll
free in N. America)
Sangoma.com © 2022, Sangoma Technologies Inc. Sangoma
Technologies is a registered trademark of Sangoma Technologies Corporation.
Every effort has been made to ensure the accuracy of this document. However,
Sangoma reserves the right to make changes without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>