STAHL 246318 Cable Gland Owner’s Manual

June 3, 2024
STAHL

STAHL 246318 Cable Gland

Installation Equipment and Accessories

  • Ex e cable glands for all armoured cables: SWA, braid- and tape- type steel or aluminium armouring
  • Safety provided by flood seal with integral protection and controlled outer load retention seal
  • Worldwide certification in accordance with IECEx and ATEX, EMC- tested

WebCode C2KA

C2K series metal Ex e cable glands are suitable for all types of armoured cables, i.e. for SWA, braid- and tape- type steel and aluminium armouring. They feature a multifunctional holder for the armouring and various seals. They are also EMC- tested.

Technical Data

Explosion Protection

Ex version| Ex e & Ex nR & Ex ta
Application range (zones)| 1

2

20

21

22

IECEx gas certificate| IECEx CML 18.0180X
IECEx gas explosion protection| Ex eb IIC Gb
IECEx dust certificate| IECEx CML 18.0180X
IECEx dust explosion protection| Ex ta IIIC Da
ATEX gas certificate| CML 18ATEX1323X
ATEX gas explosion protection| E II 2 G Ex eb IIC Gb
ATEX dust certificate| CML 18ATEX1323X
ATEX dust explosion protection| E II 1 D Ex ta IIIC Da
EAC certificate| TS RU S-GB.AA87.B.00487
EAC gas explosion protection| 7 1 Ex e IIC Gb X

7 2 Ex nR IIC Gc X

EAC dust explosion protection| 7 Ex ta IIIC Da X
Notes| The product certification and certificates can be downloaded from the manufacturer’s homepage

(www.cmp-products.com)

Ambient Conditions
Ambient temperature| -60 °C … +130 °C
Mechanical Data
Version| 50
Strain relief| No
Degree of protection (IP)| IP66
Degree of protection note| IP67 and IP68 mounting in accordance with the specifications of the manufacturer, CMP


Mechanical Data


Sealing material| SOLO LSF
Sealing ring material| Viton
Material| Nickel-plated brass
Silicone-free| Yes
Clamping range| 40.4 – 53 mm
Armouring type| All armouring
Armouring type 2| Without lead sheath
Clamping range| 40.4 … 53 mm
Construction type| BS 6121, IEC/EN 62444
Width across corners| 77.1 mm
Width across flats| 70.1 mm
Thread size| NPT2
Thread length| 26.9 mm
Thread pitch| 11,5 TPI
Thread standard| NPT
Gland size| 50
Grooved cone| 0.6 … 1.6 mm
Stepped cone| 2 … 2.5 mm
Inner sheath| 44.1 mm
Outer sheath| 40.4 … 53 mm
Protrusion length| 77 mm
Impact strength| 20 J
PVC boot| PVC21
Lot size| 1
Weight| 1.13 kg
Weight| 2.49 lb

Dimensional Drawings (All Dimensions in mm [inches]) – Subject to Alterations

  • A = Max. inner sheath
  • B = Outer sheath
  • C = Thread size
  • D = Width across corners
  • D = Width across flats
  • E = Thread length
  • F = Protrusion length

We reserve the right to make alterations to the technical data, dimensions, weights, designs and products available without notice. The illustrations cannot be considered binding.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals