STAHL 210727 miniCLIX Plug Connector Coupling Owner’s Manual
- June 3, 2024
- STAHL
Table of Contents
STAHL 210727 miniCLIX Plug Connector Coupling
INTRODUCTION
R. STAHL Series 8591/ 2 7- pole, explosion- protected miniCLIX plug connectors disconnect non- instrinsically safe circuits up to 400 V/ 16 A and are used as a hot swap plug connection for signal and data cables. They are available in various versions and materials: Device plugs, flange sockets, plugs/ couplers made of polyamide, nickel- plated brass or stainless steel. The cable can be connected using a crimp or spring clamp terminal. Preinstalled cables for device plugs and flange sockets enable fast and safe installation in the end devices.
INSTALLATION
- Simple installation and maintenance in Zone 1, safe and fast disconnection under load
- 6+1- pole, rated voltage up to 400 V AC, rated current up to 16 A
- Suitable for harsh industry environments, IP66/ IP68, for Zones 1 and 2
Technical Data
Explosion Protection
Application range (zones)| 1
2
IECEx gas certificate| IECEx BKI 07.0001X
IECEx gas explosion protection| Ex db eb IIC T6 Gb
ATEX gas certificate| PTB 07 ATEX 1028 X
ATEX gas explosion protection| E II 2 G Ex db eb IIC T6 Gb
Certificates| ATEX (PTB), IECEx (BKI)
Electrical Data
Rated operational voltage DC| 24 V
Switching capacity| IEC/EN 60947
AC-1: 400 V / 16 A
DC-1: 400 V / 1 A
DC-3: 60 V / 0.5 A
Ambient Conditions
Ambient temperature| -55 °C … +40 °C
Note| – 20 … + 40 °C plastic version
– 20 … + 75 °C plastic version Ith max. 1 A
– 55 … + 40 °C metal version
– 55 … + 75 °C metal version Ith max. 1 A
Mechanical Data
Degree of protection (IP)| IP66
Degree of protection note| IP68 (2 m water column, 1 hour) according to IEC/EN
60529
(with protective caps closed and secured as well as properly fitted and secured components)
Enclosure material| Plastic
Clamping range| 7 … 11 mm
Mechanical Data
Recommended colour ring coding| Grey
Coding (clock hour position)| 8
Detailed number of poles| 7 P
Weight| 0.1 kg
Weight| 0.22 lb
Mounting / Installation
Connection type| 1.5 mm² crimp
Components
Locking device present| No
Protective cap available| No
Dimensional
Dimensional Drawings (All Dimensions in mm [inches]) – Subject to Alterations
Accessories
Anti- twist protection
Anti-twist protection | Art. No. | |
---|---|---|
**** | for flange socket, device plug |
Crimping tool
****| for all crimp connection versions up to 4 mm²|
109116
---|---|---
for all crimp connection versions up to 4 mm²|
109116
Strain relief
****| Ø 7 … 11 mm, with gasket / washer|
154583
---|---|---
R. STAHL Schaltgeräte GmbH | Am Bahnhof 30 | 74638 WALDENBURG
- Tel. +49 7942 943 1700
- +49 7942 943 1777
- Email: sales.de@r-stahl.com
- r-stahl.com
References
- R. STAHL | Explosion Hazard Systems | Industrial Explosion Protection
- You will find a little bit of Stahl chemistry everywhere | Stahl | Stahl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>