tuya QT-03 Smart Water Valve User Manual
- June 3, 2024
- Tuya
Table of Contents
tuya QT-03 Smart Water Valve User Manual
Product Description
Summary
- DC 5V/2A power supply by adaptor or solar power;
- Mobile APP, using MCU microcomputer control technology;
- Timing regularly closing and opening function;
- Waterproof : lP66.
Product Specification
Key Function
Link WIFI:
Long press for 5 seconds: link WIFI and mobile phone to match network
Local Operation Function:
A:when the water valve is in the closed position, press the (setting buttons
water valve to open the position operation until the full open position. If
the ball valve is still in the running position, touch the setting button, the
device stays at the current position, and touch the setting button again.
The device will shut down.
B: When the water valve is in the open position, press the (setting button) water valve to close the position operation until the fully closed position, if the ball valve is still in the running position, press the setting button, the device stays at the current position, and touches the setting button again, the device will shut down.
Installation Tutorial
Download APP “Smart Life” and Register as Member
- Enter to the APP and press “+” at the upper right to add new item.
- Press random label to add a new item.
Be careful:
Keep the device as close to the router as possible.
- Connect the item as picture shown.
- Set to link WIFI
Note: The name and password must be right for the WIFI
- Matching interface device and APP
- Connected successfully
Performance Specication
Turn On and Off Function
-
Water valve close:
From open to close (O%) accuracy is 5% -
Water valve open:
From close to open fully (1OO%) accuracy is 5% -
Controlled by button or mobile app
APP Control
Open Function
When the APP shows that the valve is open, the countdown function will start
and the water valve will be closed after 60 seconds. lf need to turn on time
adjustment, manually click the left picture , enter the right interface, set
the watering time you need.
APP Cloud Timing Function
- Set Start Time
- Set End Time
- Set Valve Position according to your needs
- Set finished
Cloud Timing Success Interface
(unlimited frequency)
Examples of Operation
For example:
Set watering 2 minutes one time, with flow rate controlled at 30% position,
water every two days.
Schematic diagram as below:
Fault Alarm Function
Motor Fault Alarm:
When there is something wrong with valve ,it will stop working automatically And you can see the tip of Failure warming on app interface.(see the picuture)
Materials: Brass & ABS Plastic
Valve Size: 1/2 , 3/4 , 1
Frequency of Cloud Timing:
Minimum once a day, maximum unlimited times per day, the interval between the
maximum period is once a week
Irrigation Timer:
App controls can be accurate to second, with longest setting time 23:59:59
Cloud timing at least 1 minute, lasting longest 23:59
Power: DC5V/2A
Max Pressure Rating: 16 Bar
Support Water Temperature: 0—7O”C
Power Failure: Automatic delay closing
Support Environment Temperature: -5-65”C
Procedure:
multi-program, single program, General, multi days, single day
Controller Operation:
App manual control, Field manual operation, App cloud timing
Device Sharing
Steps For The Device To Be Shared With Other Members (who are already members):
After the steps are completed as shown in the following figure, will be sent a system message to the person who you are shared, then they just need to confirm join
Group Function:
Follow the steps below to add any device to your app, you can also name it arbitrarily.
Documents / Resources
| tuya
QT-03 Smart Water
Valve
[pdf] User Manual
QT-03 Smart Water Valve, QT-03, Smart Water Valve, Water Valve, Valve
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>