ZKTeco SpeedFace-V3L Multibiometric Terminal User Guide
- June 3, 2024
- ZKTECO
Table of Contents
SpeedFace-V3L Multibiometric Terminal
Version: 1.0
User Guide
SpeedFace-V3L Multibiometric Terminal
Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
Overview
Terminal Block
Installation Environment
Please refer to the following recommendations for installation.
Device Installation
- Attach the mounting template sticker to the wall, and drill holes according to the mounting paper.
- Fix the backplate on the wall using wall mounting screws.
- Attach the device to the backplate.
- Fasten the device to the backplate with a security screw.
Standalone Installation
Power Connection
Recommended AC Adapter
- 12V ± 10%, at least 1500mA.
- To share the power with other devices, use an AC Adapter with higher current ratings.
Ethernet Connection
Connect the device and computer software over an Ethernet cable. As shown in
the example below:
Click on [COMM.] > [Ethernet] > [IP Address] , input the IP address and click
on [OK].
Note: In LAN, the IP addresses of the server (PC) and the device must be
in the same network segment when connecting to the ZKBio Access software.
Wiegand Reader Connection
Note: 485A and 485B can be connected to the Barrier gate or the 485
Reader, separately, but cannot be connected to the gate and reader at the same
time.
RS485 Connection
Door Sensor, Exit Button, Alarm & Auxiliary Connection
Lock Relay Connection
The system supports Normally Opened Lock and Normally Closed Lock. The NO LOCK
(normally unlocked when power-on) is connected with ‘NO’ and ‘COM’ terminals,
and the NC LOCK (normally locked when power-on) is connected with ‘NC’ and
‘COM’ terminals. Take NC Lock as an example below:
**User Registration
**
When there is no super administrator set in the device, click on to enter the
menu. Add a new user and set User Role to Super Admin, then the system
requests for the administrator’s verification before entering the menu. It is
recommended to register a super administrator initially for security purposes.
Method 1: Registering on the device
Click on > [User Mgt.] > [New User] to register a new user. The options
include entering the user ID and Name, setting User Role and Access Control
Role, registering Fingerprint, Face, Card Number and Password.
Method 2: Register on ZKBio Access software
Please set the IP address and cloud service server address in the Comm. Menu
option on the device.
- Click [Access] > [Access Device] > [Device] > [Search Device] to search the device on the software. When an appropriate server address and port is set on the device, the searched devices are displayed automatically.
- Click [Add] in operation column, a new window will pop-up. Select Icon type, Area, and Add to Level from each dropdowns and click [OK] to add the device.
- Click [Personnel] > [Person] > [New] and fill in all the required fields to register a new users in the software.
- Click [Access] > [Device] > [Device Control] > [Synchronize All Data to Devices] to synchronize all the data to the device including the new users.
For more details, please refer to the ZKBio Access User Manual.
Method 3: Register on the phone
Once the ZKBio Access software is installed, the users could enroll their face
via a browser application on their own mobile phone.
- Click [Personnel] > [Parameters], input ‘’ http://Server address : Port’’ in the QR Code UGL bar. The software will automatically generate a QR code. Scan the QR code or login onto ‘’http://Serveraddress: Port/app/v1/adreg’’ by the mobile phone to register users.
http://110.80.38.74:8098/app/v1/adreg - The users will be displayed in [Personnel] > [Temporary Personnel], click on [Review] option and assign a department and click [OK] to successfully add the user.
Ethernet and Cloud Server Settings
Click on > [COMM.] > [Ethernet] to set the network parameters. If the
TCP/IP communication of the device is successful, the icon will be displayed
in the upper right corner of the standby interface.
Click on > [COMM.] > [Cloud Server Setting] to set the server address and
server port, that is, the IP address and port number of the server after the
software is installed. If the device communicates with the server
successfully, the icon will be displayed in the upper right corner of the
standby interface.
Note:
While pairing the device with ZKBio Access software. Make sure that the option
Enable Domain Name is disabled and the correct server address and port are
entered.
Server Address: Set as the IP address of the ZKBio Access server.
Server Port: Set as the service port of ZKBio Access.
Access Control Setting
Click on >[Access Control] to enter the access control management interface
and > [Access Control] set relevant parameters of access control.
Attendance Record
Click on > [Attendance Record] to enter the record query interface, input the
user ID and select the time range, the corresponding attendance record will be
displayed.
System Setting
Click on > [System] to enter the system interface to set the related system parameters for optimizing the accessibility of the device.
ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone : +86 769 – 82109991
Fax : +86 755 – 89602394
www.zkteco.com
Copyright © 2022 ZKTECO CO., LTD. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>