Baseus CCJJ000001 Magnetic Stand Wireless Charger User Manual
- June 3, 2024
- Baseus
Table of Contents
User Manual
Baseus CW01 Magnetic Wireless Charging Car Mount
Please read this user manual carefully before use and keep for future
reference.
Installation
- Clip the tail clamp onto the most suitable spot of the air vent
- Plug the car charger into the charging port of the car
- Place the phone with magnet plate into the mount
Product Specifications
Name: Baseus CW01 Magnetic Wireless Charging Car Mount
Model No.: BS-CW01
Input: DC 12V~24V
Total Power: 33W
Wireless Charging Output: 5W/7.5W/10W/15W
USB-A Output: 5V ⎓ 3A 9V ⎓ 2A 12V ⎓ 1.5A
Type-C Output: 5V ⎓ 3A 9V ⎓ 2A 12V ⎓ 1.5A
Product Introduction
① Wireless charging area
② Ambient light
③ Tail clamp| ④ Wireless charging switch
⑤ Wireless charging switch indicator
⑥ Car charger
---|---
USB-A Output: 18W
Type-C Output: 18W
Total Power: 18W+15W=33W
Lighting Effect Instructions
Wireless charging on: Indicator on
Wireless charging off: Indicator off
Standby: Ambient light breathing
Operating: Ambient light spinning
Abnormal: Ambient light flashing quickly
Note: The faster the charging speed is, the faster the ambient light spins.
Declaration on hazardous substances and elements contained in electronic
products
Part
Descrption| Hazardous substances and elements
---|---
Lead (pb)| Mercury (Hg)| Cadmium
(Cd)| Hgroavmailuent chromium (Cr VI)| Polybrominated
Biphenyls (PBB)| Polybrominated
Biphenyl ethers
(PBDE)
PCB| X| O| O| O| O| O
Plastic| O| O| O| O| O| O
Accessory| O| O| O| O| O| O
This form is compiled in accordance with SJ/T 11364.
O: It indicates that the content of the harmful substance in all homogeneous
materials of the component is below the limit specified in GB/T 26572 standard.
X: The content of harmful substances in at least one homogeneous material of
this part exceeds the limit stipulated in GB/T 26572 standard.
Warm Tip: The 5-year icon refers to the “effective life of environmental
protection”, not the product quality assurance period. Electronic products all
contain harmful substances such as lead, mercury and cadmium.
Once they are overused, harmful substances may leak or mutate, cause pollution
to the environment, or cause serious damage to people and property. The term
of “environmental protection use” means that all electronic products will be
required to use within this effective period. We will no longer be responsible
for the quality of the products due to the safety risks that arise after the
safe use period.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
It is hereby declared that this product model BS-CW01 of Shenzhen Times Innovation Technology Co., Ltd., complies with the provisions of Directive 2014/53/EU, Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com
This equipment complies with the provisions of Directive 2012/19/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.
FCC ID:2A482-BC-CW01
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: Q/BASEUS 019
Hotline: +86-4000-712-711 Website: www.baseus.com
PB3755Z_P0A0 1X
Designed by Baseus
Made in China
Documents / Resources
|
Baseus CCJJ000001 Magnetic Stand Wireless
Charger
[pdf] User Manual
CCJJ000001, Magnetic Stand Wireless Charger, CCJJ000001 Magnetic Stand
Wireless Charger, Stand Wireless Charger, Wireless Charger, Charger
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>