TELLUR TLL511431 Ego Bluetooth In-Ear Headphones User Manual

Ego Bluetooth
In-Ear Headphones
User manual
TLL511431

INTO YOUR FUTURE

Technical specifications

Bluetooth version: 5.0
Wireless range: 10m
Supported profiles: HSP, HFP, A2ZDP, AVRCP
ANC technology: Yes, efficiency 22 db
Multipoint technology: Pair and maintain connections with two phones and answer calls from either phone Audio codecs supported: SBC, AAC
Speaker size: 13mm
Frequency response: 20Hz – 20KHz
Speaker impedance: 160
Speaker sensitivity: 103dB (3dB) f@ 1 KHz,126mV
Speaker rated power: 3mW
Microphone sensitivity: 38dB +3dB
SNR: 60dB
THD: less than 1% 94dB SPL @1kHz
Impedance: 2000
Sweat and water resistant: |PX4
Music play time: Up to 9 hours
Standby time: Up to 120 hours
Charge time: Approx. 1.5 hours
Battery capacity: 120mAh
Charging plug: Micro USB
Features: Voice alerts, battery state monitor
Bluetooth pairing name: Tellur Ego
Earphone dimensions: 170 x 132.5 x 20mm
Weight earphone: 28g
Material: TPU + ABS and TPE for cables
Color: Black
Package includes: 1 x Ego Bluetooth In-Ear Headphones  1 x USB to Micro USB cable 3 x Set of ear tips (S, M, L) 1x Manual
Operating temperature: -15°C to 45°C

Pairing

1. Make sure the headphones and your Bluetooth device are next to each other (within 1m)
2. Press and hold the multifunction button (MFB) for more than 1 second to power on the headphones (Voice prompt: Power On]. The headphones will enter pairing mode automat- ically and the LED indicator will be flashing blue and red alternately (Voice prompt: Pairing).
3. Activate Bluetooth function on your phone and search for the nearby Bluetooth connection “Tellur Ego”.
4. Once connected, only the blue LED will flash once every 5s (Voice prompt: Connected).

Active Noise Cancelling (ANC)
To activate ANC function double press MFB button (Voice prompt: ANC On)
To deactivate ANC function, double press again the MFB button [Voice prompt: ANC Off)

Charging

1. Connect the charging port with any USB charging adapter or active computer USB port.
2. Charging will start automatically, and the LCD indicator will turn red.
3. When the LED indicator has turned off, the headphones are fully charged.

Multipoint

1. Use the pairing operation to connect with phone A, then turn off the Ego headphones.
2. Turn on the Ego headphones again to go into the pair mode and repeat the pairing steps to connect with phone B.
3. Then turn off the Ego headphones again.
4. At last, turn on the Ego headphones [without entering pairing mode] and they will connect with phone A and phone

B automatically.

***Some phone models require manual select and connect when pairing with the second phone.

Product diagram

1. + key – volume up / next song
2. – key – volume down / previous song
3. MFB – multifunction button
4. LED indicator
5. Micro USB charging port

for 3s
Siri| Press Multifunction button (MFB) three times
Led Indicator| Status
---|---
Solid red| Charging
Flashes blue and red alternately| In pairing mode
Flashes blue and red alternately| Disconnected from Bluetooth device
Flashes blue once every 5s| Paired with a Bluetooth device

Warnings

1. Do not clean the headphones with abrasive clothes or substances.
2. Do not expose this product to excessive heat or fire sources.
3. Do not expose this product to direct sunlight for long periods of time.
4. Do not attempt to disassemble this product.
5. Do not use this product in heavy rain or very moist environment.
6. If you don’t use this product for a long period of time, store it in a dry environment and charge the headphone at least once a month to maintain a healthy battery.
7. Avoid extreme temperature and dust.

Disposal and recycling information
The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage.
It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws.
Proper collection and recycling of your equipment helps ensure EEE waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recy- cling at the end of its life may be harmful for health and environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>