TRI-COGO GigaSpire BLAST u4m WiFi Extender User Guide
- June 3, 2024
- TRI-COGO
Table of Contents
Quick Start Guide
Setting up your GigaSpire BLAST u4m
GigaSpire BLAST u4m WiFi Extender
-
Connect your GigaSpire BLAST u4m to the power outlet.
-
Once the light begins flashing red, you can pair your GigaSpire BLAST u4m (extender) with the GigaSpire BLAST u6x (router). Less than 30 seconds apart, press and hold the WPS buttons on the extender and then the router for 3 seconds each. The light will flash green while pairing.
Note: Once the pairing is successful, both the extender and router lights
will show a solid green color. This can take several minutes. -
Use the solid green light to determine the best location for your extender.
When your extender is at an ideal distance from your router, the light will show a solid green color.
-
If necessary, use the Tri-CoGo Control Center App to set up the GigaSpire BLAST u6x. See the Quick Start Guide on the website for guidance.
Need help?
Contact our Support Team: 844-662-7570
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>