Pyle PFA560BT Wireless Bluetooth Home Audio Amplifier User Manual

Pyle PFA560BT Wireless Bluetooth Home Audio Amplifier

Important Safety Information

OWNER’S RECORD

The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your PyleUSA regarding this product.

• Model no.
• Serial no.

FOR CUSTOMERS

• This symbol is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure, it may be of sufficient magnitude to constitute a risk of electric shock to persons.
• CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
• This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

You are cautioned that changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains and etc. Do not place lighted candles on the apparatus.
• To prevent fire or shock hazards, do not place objects filled with liquid, such as vases, on the apparatus.
• Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
• Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.
• Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunlight or fire.

Note to Soundbar Installer:

This reminder is provided to call the Soundbar installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as possible.

INSTALLATION

Front Panel Function

1. LED Display Window
2. Volume Control Knob
3. Stand By Adjustment Knob
4. Tuner Adjustment Knob
5. Bypass Adjustment Knob
6. Mute Adjustment Knob
7. Input Adjustment Knob

REAR PANEL CONNECTION

USING THE REMOTE CONTROL

Remote Control System

1. SLEEP MODE SELECTOR
2. INPUT MODE SELECTOR
3. BASS VOLUME ADJUST SELECTOR
4. TUNER CONTROL AREA
5. BLUETOOTH CONTROL AREA SELECTOR
6. MUTE CONTROL SELECTOR
7. TREBLE VOLUME ADJUST SELECTOR
8. SUBWOOFER VOLUME ADJUST SELECTOR°FOR ACTIVE SUBWOOFER˛
9. BYPASS CONTROL SELECTOR

BATTERY INSTALLATION

Since the remote control will be used for many units to control operations, you should begin by installing the supplied battery:

1. Turn the remote control over and pull out the battery compartment cover.
2. Insert the battery according to the battery compartment.
3. Close the battery compartment cover.
4. Test the unit by pressing Mute or any mode key. If the battery is inserted correctly, the system will respond to the instruction.

Note

• Do not leave the remote control in an extremely hot or humid place.
• Do not expose the remote sensor to direct sunlight or lighting apparatus that may cause malfunction.
• If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
• If you find that the remote control can’t be used at a normal distance from the main unit, then the battery could be weak, so you need to replace the battery with a new one.
• If the battery leaks, remove it immediately and properly dispose of it. Avoid touching the leaked material and splashing it into clothing, etc. Clean the battery compartment thoroughly before installing new battery.

BASIC OPERATION

• Power Up the System
  Connect the AC adaptor and turn on the “POWER” in the back panel, the system will open automatically.

• Select Sleep Mode
  Sleep mode allows you to make the system sleep at a selected time.

  •  Press “ ”key or press the sleep button on the front panel to select sleep mode
  •  Wake up the system by pressing the same key when the system is in sleep mode.

1. Master Volume Control
   Press the ” ” Key on the front panel to adjust the main channel volume.
   

2. How to Adjust Treble
   Press the “ ” to adjust the treble volume.

3. How to Adjust Bass
   Press the “ ” to adjust the bass volume.

4. How to Adjust Subwoofer
   Press the to adjust the bass volume.

5. How to Play Wireless BT Streaming Select Wireless BT on remote control

   • : Pair up your Wireless BT device with audio
   • : Wireless BT play and pause
   • : Wireless BT skip track

How to Play Tuner

1. Select FM Input Mode
   Press the ” ” key to choose the FM input mode. The LED will display the last turner frequency, for example, 87.5.

2. Listen to the Preset Program
   Press the number keys ” ” to select the radio program that you already saved. Once selected, the screen will display the radio program’s frequency in the memory area.

3. Select Program
   Press the  key to adjust the band of the tuner. Press the FM will search automatically. Then you can press the function.

4. Memory Program
   When you receive a clear radio program and want to save the channel, press one of the 10 number keys for 2 seconds to assign that number key to that channel.

How to Mute

Press “ “key to turn the sound off/on. Press again to restore the audio to the original level.

How to adjust the bypass

Under HDMI mode, press the to control the number of speakers

1. “ON”: All five Satellite speakers work.
2. “OFF”: IF the sound source has two channels, only two（FL/FR） speakers work.

If the sound source has five channels, all five Satellite speakers work.

Except under HDMI mode, press the Bypass key to control the number of speakers

1. “ON”: All five Satellite speakers work.
2. “OFF”: Only two（FL/FR）speakers work.

HOW TO PAIR WIRELESS BT RECEIVER

The system has a built-in Wireless BT receiver. If you are pairing the Wireless BT from a mobile phone for the first time, Open the system and press the key on the remote and the LED will show “pair”. Then search for the Wireless BT sender (Device ID: PyleUSA) by your own Wireless BT sender (mobile phone). If the system has been paired already with the Wireless BT sender, the next time you pair will be automatic. After that, you can enjoy music with the Wireless BT receiver. The system will turn to a normal working state if there’s no pairing in 10 minutes.

TROUBLESHOOTING

__

The system has no power

| ~ The AC adapter is connected incorrectly.

~ The socket has no power

__

__

No sound at all

| ~ Incorrect selection of input signal.

~ If the mute state is turned on.

~ Sound source machine is not powered.

Either of the main channels has no sound| ~ The signal plug is connected incorrectly or lines had short-circuited.
__

Abnormal LED screen display

| ~ It may be affected by exterior strong disturbance, turn on first and turn on again

~ Avoid direct sunlight/heat.

Warning: This product can expose you to a chemical or group of chemicals, which may include ”Nickel Carbonate” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.

Features

• 1-Channel Powered Amp Design
• Lightweight & Compact Size
• Hassle-Free Wireless BT
• Wireless Music Streaming Receiver-Free Connection
• FM Radio with Digital LED Display
• Front Panel Button Control Center
• HDMI Output + (2) HDMI Inputs
• Spring Loaded Speaker Terminal Connectors
• Full Range Stereo Sound Reproduction
• RCA Subwoofer Output
• Includes Remote Control

Wireless BT Connectivity

• Built-in Wireless Music Streaming Receiver
• Compatible with All of Your Favorite BT Devices
• Smartphones, Tablets, Computers, Laptops,
• Wireless BT Version: 0
• Wireless BT Network Name: ‘PyleUSA’

What’s in the Box

• Compact Amplifier
• Remote Control
• 12V Power Adapter

Technical Specs

• Remote Control Battery Operated, Requires (2) x ‘AAA’ Batteries
• Battery Type: 14.8V Lithium-ion 1500mAh
• Power Output: 100 Watt MAX (5x20W)
• HDMI 2160p Support
• Wireless BT Protocol Support: AVRCP 4
• Construction Material: Metal, Aluminum Alloy
• Power: 110/220V (12V Power Adapter)
• Dimensions: 0’’ x 5.8’’ x 2.0’’ -inches

Questions? Issues?

• We are here to help!
• Phone: (1)718-535-1800
• Email: support@pyleusa.com

FREQUENTLY ASKED QUESTIONS

What is the Pyle PFA560BT Wireless Bluetooth Home Audio Amplifier?

The Pyle PFA560BT is a wireless Bluetooth home audio amplifier designed to enhance your audio experience by amplifying sound signals from various audio sources.

What are the key features of the Pyle PFA560BT?

Key features include wireless Bluetooth connectivity, built-in amplifier, USB/SD card readers, FM radio, microphone input, RCA and AUX inputs, and remote control.

How does the wireless Bluetooth connectivity work on the Pyle PFA560BT?

The PFA560BT can wirelessly connect to Bluetooth-enabled devices, such as smartphones, tablets, or computers, allowing you to stream audio wirelessly.

What audio sources can be connected to the Pyle PFA560BT?

You can connect various audio sources, including CD/DVD players, MP3 players, smartphones, tablets, computers, or other devices with RCA or AUX outputs.

Can I use the Pyle PFA560BT as the main amplifier for my home audio system?

Yes, the PFA560BT can serve as the main amplifier for your home audio system, driving your speakers and enhancing the audio output.

Does the Pyle PFA560BT have a built-in amplifier?

Yes, the PFA560BT includes a built-in amplifier that powers your speakers and improves the overall sound quality.

What are the USB/SD card readers used for on the Pyle PFA560BT?

The USB and SD card readers allow you to directly play audio files from USB drives or SD cards, providing convenience and versatility.

Can I listen to FM radio on the Pyle PFA560BT?

Yes, the PFA560BT features an FM radio tuner, allowing you to listen to your favorite radio stations.

Can I connect a microphone to the Pyle PFA560BT?

Yes, the PFA560BT has a dedicated microphone input, making it suitable for karaoke, public speaking, or announcements.

What input options are available on the Pyle PFA560BT?

The PFA560BT offers multiple input options, including RCA inputs, AUX inputs, USB inputs, SD card inputs, and Bluetooth wireless connectivity.

Can I control the Pyle PFA560BT from a distance?

Yes, the PFA560BT comes with a remote control that allows you to control various functions, including volume, source selection, and playback options.

Are there equalizer settings on the Pyle PFA560BT?

Yes, the PFA560BT features built-in equalizer settings, allowing you to adjust the audio output based on your preferences or the content being played.

Does the Pyle PFA560BT support multi-room audio?

The PFA560BT does not have built-in multi-room audio capabilities. However, you can use additional amplifiers and speakers to create a multi-room audio setup.

What is the power output of the Pyle PFA560BT?

The PFA560BT has a power output of 300 watts, providing ample power to drive your speakers and deliver high-quality sound.

Can I connect passive speakers to the Pyle PFA560BT?

Yes, the PFA560BT has speaker outputs that allow you to connect passive speakers for audio playback.

Can I use the Pyle PFA560BT with my TV or home theater system?

Yes, the PFA560BT can be connected to your TV or home theater system using RCA or AUX inputs to enhance the audio quality.

DOWNLOAD THE PDF LINK:Pyle PFA560BT Wireless Bluetooth Home Audio Amplifier User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>