XERIC Halograph III Chrono Watch User Manual

XERIC Halograph III Chrono Watch

OVERVIEW

FEATURES

• 316L Surgical-Grade Stainless Steel
• Ultra-Reliable Miyota Quartz Chronograph. Made in Japan
• Accuracy of +/- 20 sec/month
• Anti-reflective Sapphire Crystal
• U.S. Horween or Italian Leather Strap
• Swiss Super-LumiNova Hands
• 5 ATM Water Resistance

SETTING THE TIME

1. Pull the crown out to the 1st Click Position.
2. Turn the crown to set hour and minute hands.
3. Push the crown back to its normal position. All done!

USING THE CHRONOGRAPH

The Holograph III Chrono stopwatch is able to measure and display time in 1-second increments up to the maximum of 29 minutes 59 seconds.
The Holograph III Chrono stopwatch will automatically stop after running continuously for 30 minutes.

MEASURING TIME WITH THE HOLOGRAPH CHRONO STOPWATCH

1. Press button “A” to start the stopwatch.
2. The stopwatch will start and stop each time button “A” is pressed.
3. Press button “B” to reset the stopwatch and the Halograph III Chrono stopwatch minute and second discs will return to their ZERO positions.

ADDITIONAL INFO

• Battery type : SR621SW
• Designed in California.
• Assembled in PRC from international suppliers

ADJUSTING THE STOPWATCH

This procedure should be performed when the stopwatch’s second hand does not return to the ZERO second position after the stopwatch has been reset

1. Pull the crown out to the 1st Click Position.
2. Press button “A” to set the stopwatch’s second disc to the ZERO position.
3. The stopwatch minute disc is synchronized with the stopwatch second disc.
4. The stopwatch’s second disc can be advanced rapidly by continuously pressing the button “A”.
5. Once the discs have been zeroed, reset the time and return the crown to its normal position.

WARRANTY

Xeric gladly offers a limited warranty covering defects in materials and manufacturing for a period of one (1) year after the original purchase date from an authorized Xeric retailer. This warranty does not cover batteries or any changes that occur during use and not from manufacturing or assembly (scratches, cracks, etc. on the case, crystal, or straps, crowns, or pushers). This warranty is considered void if you open your caseback, push the buttons underwater, or expose your watch to moisture beyond the recommendation of the watch’s water resistance rating. Proof of purchase is required for all warranty claims and service requests, so please save a copy of your receipt. Xeric will not accept a warranty claim or repair request if a watch has evidence of excessive wear or misuse. Xeric reserves the right to repair or replace any watch returned for service at our option.

Water Resistance Guide

• ATM = Not intended for any exposure to water.

• 5 ATM = Splash Resistant
  Suitable for washing hands or light rain.

• 10 ATM = Water Sports
  Suitable for swimming, surfing, etc.Scuba Diving Suitable for extreme ocean depths.

• 30 ATM = Scuba Diving
  Suitable for extreme ocean depths.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>