LOGIC ML8 4G MiFi User Manual
- June 3, 2024
- Logic
Table of Contents
LOGIC ML8 4G MiFi
Know your MiFi
Foreword
Honorific device user, thank you for choosing our mobile phone! Our MiFi are
according with the commun ication industry standards of PRC, and also
according with the standards of European, and are approved for GSM networks.
Your de vice may be used internationally with various networks depending on
your roaming arrangements with your service provider. To use this device you
must subscribe to a GSM service from a provider. We have i ncluded many
features in this device, but their function depends on the features available
with your subscribed wireless network. Please contact your service provider
for more info rmation.
We strongly recommend you carefully read and understand this manual before
using your phone in order to keep it under best conditions for your effective
usage and utmost satisfaction.
Safety
- Never attempt to disassemble your device . You alone a re responsible for how you use your device and any consequences of its use.
- As a g eneral rule, always switch off your device wherever the use of a device is prohibited.
- Use of your device is subject to safety measures designed to protect users and thei r environment.
- Do not use your device in damp areas (bathroom, swimming pool…).
- Protect it from liquids and other moisture.
- Do not expose your device to extreme temperatures lower than 10°C and higher than + 55°C.
- Please note that the ambient tempe rature range for normal charging of mobile device is 0 °C ~ 45 °C. Do not charge at an ambient temperature below 0 ° C or above 45 ° C, as this will result in reduced battery performance and reduced life. Charging for too long at too high or too low ambien t temperatures can damage unfilled or swelled batteries, and there is a risk of battery explosion
- The physicochemical processes created by chargers impose temperature limits when charging the battery. Your device automatically protects the batteries in e xtreme temperatures.
- Do not leave your device within the reach of small children (certain removable p arts may be accidentally ingested).
Electrical safety
Only use the chargers listed in the manufacturer’s catalogue. Using any
other charger may be dang erous; it would also invalidate your warranty. Line
voltage must be exactly the one indicated on the char ger’s serial plate.
Aircraft safety
When traveling by plane, you will need to switch your phone off when so
instructed by the cabin crew or the warnin g signs. Using a mobile phone may
be dangerous to the operation of the aircraft and may disrupt the phone
network. Its use is illegal, and you could be prosecuted or banned from using
cellular networks in the future if you do not abide by these regulations
Explosive materials
Please comply with warning signs at petrol station when personnel asking you
to switc h your phone off. You will need to comply with radio equipment usage
restrictions in places such as chemical plants, fuel depots and at any
location where blasting operations are under way.
Electronic equipment
To avoid the risk of demagnetization, do not let electronic devices close to
your phone for a long time.
Electronic medical equipment
Your phone is a radio transmitter which may interfere with e lectronic medical
equipment or implants, such as hearing aids, pacemakers, insulin pumps, etc.
It is recomm ended that a minimum separation of 5m m be maintained between the
phone and an implant. Your doctor or the manufacturers of such equipment will
be abl e to give you any advice you may need in this area.
Hospitals
Always make sure that your phone is switched off in hospitals when so
instructed by warning signs or by medical staff.
Road safety
Do not use your phone when driving. In order to give your ful l attention to
driving, stop and park safely before making a call. You must comply with any
current legisla tion.
Distance of operation
This device model has been tested and meets radiofrequency exposure guidelines
when used
As follows:
- Against the ear: place or receive a phone call and hold the phone as you would a wire line telephone.
- Body worn when transmi tting, place the phone in a carry accessory that contains no metal and positions the phone a minimum of 5m m form your body. Use of other accessorie s may not ensure compliance with radiofrequency exposure guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a minimum of 5m m from your body,
- Data operation: when using a data feature, position the phone a minimum of 5m m from your body for the whole duration of the data transmission.
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to
similar collection points. With this little personal effort, you contribute to
recycle valuable raw materials and the treatment of toxic substances.
SIM card installation
Refer to the following picture put the SIM card into the card slot. 
Main functions
SIM card LED
Do not insert the SIM card, power on to view, SIM card indicator red light is
solid; Insert an invalid or valid SIM card, power on to view, SIM card LED
blue light is on; Insert the SIM card that opens the PIN code, turn on the
system to view, the SIM card indicator light flashes red, and the blue light
is solid after unlocking.
Battery LED
When the charger is not plugged in, full or normal power (not full or low
power) to view, the battery indicator blue light is on; Low battery view,
battery indicator red light is solid. Full or normal power plugged into the
charger to charge, battery indicator blue light is solid on; Low battery plug
into the charger to charge, battery indicator blue light often blinking.
WIFI LED
The device is turned on, the WIFI function is automatically turned on, and the
WIFI indicator light is always on; Log in to the web page 192.168.1.1 (Login:
admin Password: admin), WIFI APK select off, WIFI indicator red light is
solid.
Network
Insert the SIM card, the rest of the devices can be connected to the device
WIFI, after entering the correct password, you can access the Internet
normally, up to 8 units can be connected.
Power key
Long press the power button under shutdown, observe, the device turns on
normally, and the lights are lit in turn; Long press the power button under
boot, observe, the device shuts down normally, the lights go out; Short press
the power button under shutdown, observe, the device does not respond; Power
on for a period of time, and when the light is off, press the power button
shortly, observe, the indicator light of the device is normally lit.
Reset key
Long press the operation reset key (2s or more) under boot, the device is
restored to the factory and powered on, and the basic information is viewed as
the default value
Accessories
Use only batteries, chargers, and accessories approved by the manufacturer with this device. Use of any other types will invalidate the warranty and may be dangerous. Check with your dealer for available accessories. You may opt to buy:
- Charger Plug, charger cable
- Charger plug used to connect with the charger cable for charging on wall outlets. Also, you can use the charger cable to connect with the other devices such as the personal computers to charge the phone.
- Charging time is about 3 to 4 hours. The charging condition is displayed on screen. You may use your phone while charging.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES AccORDING TO THE INSTRUCTIONS
FCC Regulations
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC ID: TBC
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Body-worn Operation
This device was tested for typical body-worn operations. To comply With RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third party belt clips, holsters, and similar including the antenna. Third party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body worn accessories that do not meet these require ments may not comply with RF exposure requirements and should be avoided.
SAR
This wireless phone meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6
W/kg averaged over one gram of tissue. Device types UL284 X2805 has also been
tested against this SAR limit. The highest SAR value reported under this
standard during product certification for use at the ear is XXXW/kg and when
properly worn on the body is XXXW/kg. This device was tested for typical body-
worn operations with the back of the handset kept 1cm from the body. To
maintain compliance with FCC RF exposure requirements, use accessories that
maintain a 1cm separation distance between the user’s body and the back of the
handset. The use of belt clips, holsters and similar accessories should not
contain metallic components in its assembly. The use of accessories that do
not satisfy these requirements may not comply with FCC RF exposure
requirements and should be avoided.
Technical Specifications
- Weight: 91g (with battery)
- Size: 97.7x 65 x14.05mm
- Battery: 4.35 Li-on
- For the network: 3G 1/2/5/8+ 4G 1/2/3/4/5/7/8/12/17/28AB
Battery refer to the following table:
Battery Type| Battery
Capacity
| Talk Time| Standby Time
---|---|---|---
Li-Battery| 2500mAh| /| 41 hours
- Battery Manufacturer: Hangtian
- Battery model： 178264961，2500mAh
Notice: The actual condition for mobile phones using has the relation to
the network of the local environmental conditions, SIM card and the way using.
Warning: For the consequences result by violating the following
recommendations or using mobile phones in accurately, the manufacturers has no
responsibility.
Explain: If relate to the upgrades, without notice. The Company has the
right for the final interpretation of this statement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>