tuya S20 4G Intelligent Solar Energy Alert PTZ Camera User Manual
- June 3, 2024
- Tuya
Table of Contents
4G
Intelligent Solar Energy
Alert PTZ Camera
User Manual
PRODUCTS & PACKING LIST
1.1 Product picture:
1.2 Packing list:
Product Diagram
1.3 Quick Setup
1.3.1 Insert the USB cable of solar panel to the “USB” Silicon Flap on the
bracket base for batterty charging.
1.3.2 Press the Power switch to turn ON/OFF me camera
1.3.3 Wait the voice prompt step by step for pairing the camera with the APP.
1.4 Note:
1 .4.1 Before you turn on the camera, please close the silicon flap to avoid
rain leakage.
1.4.2.Make sure your phone is connecting to the 2.4Ghz wifi firstly before you
pairing the camera.
INSTALLATION
2.1 Intergrated installation
2.2 Separated installation
APP INSTALLATION
3.1 Search and download” tuya” in major applicatio markets or scan the QR code below to download the APP.
https://smartapp.tuya.com/tuyasmart
3.1.1 Once you download the APP to your smart phone, you may enter the first
page which you can Login with existing account or register.
(If you are the new user of Smart Life and don’ t have an account, please
choose register first and follow the below screenshots to complete the
registration. )
(If you have the existing account, there are two ways to login, one is with
SMS verification Code, the other one is with password.
In case you forget the password, you may choose login SMS verification Code or
you can choose forgot password to reset it by Entering Verification Code which
sent to you mobile via message.)
3.1.2 Once the account has been setup successfully, then you will
automatically enter the page of “add device”, kindly follow below steps to add
the camera.
Step1 :click “Add Device” or click” +” on top of rig ht on this page.
Step2: Scan the QR code on the camera with your mobile phone, and after successfully pairing, it will prompt “Added successfully”
Step3. If you choose” the other mode” on the top of the right side, you may find QR Code Net-pairing Which you will go back to the “Add device” page and process it again like above procedure. Or you can choose “Smart configuration” and follow the below screen shots and after that you will see the device added successfully.
FAQ:
After the configuration is done, our device will be showed on Smart Life APP
which enable you to surf the smart living easily.
If you have any questions about App using, you may go to category”me” to find
the” Help Center”and check if you have the same issues. If not, you can report
the issue and then your problems will be handled and answers will be given
soon if you provide as much information as you can.
Safe Battery Handling and Usage
DO NOT allow the batteries or battery compartment to get wet prior to or during installation while your Wire-Free camera is weatherproof and safe to use outside.