ITC 86400-4 Molded All Weather Assist Handle Installation Guide
- June 3, 2024
- ITC
Table of Contents
86400-4 Molded All Weather Assist Handle
Installation Guide
Part#: 86400-4, 86400-6, 86400-18 & 86400-19
PARTS/TOOLS NEEDED:
| |
---|---|---
Assist Handle| #8 Pan Head Screws
(Not Provided – recommended 2 per end caps)| Power Drill
(Not Provided)
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
- Remove end caps from handle, determine installation location, then mark screw holes and drill pilot holes.
- Place handle over holes and install using stainless steel screws (Not Provided).
- Align the end cap cover and snap into place.
For warranty information please visit www.itc-us.com/warranty-return-
policy
DOC #: 710-00083 • Rev D •11/22/22
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>