KOHLER K-819-F63 66-16 Inch Freestanding Bath Float Instruction Manual
- June 4, 2024
- Kohler
Table of Contents
K-819-F63 66-16 Inch Freestanding Bath Float
**Instruction Manual
**
Rêve®
66-15/16″ freestanding bath w/ Float installation K-819-F63
Features
- The freestanding design creates a striking focal point in your bathing area.
- The integral lumbar support on both ends.
- Safeguard® slip-resistant surface on bath floor provides additional traction underfoot.
- Slotted overflow allows for deep soaking.
- Center toe-tap drain.
- Includes one wood composite base, four cast iron adjustable feet, and one wooden overflow/drain shroud.
- Coordinates with other products in the Rêve collection.
Material
- KOHLER® enameled cast iron.
- Painted exterior.
- Wood composite pedestal base with Brilliant Ash painted finish.
Installation
- Freestanding.
Required Products/Accessories
K-7271 Brass Slotted Overflow Bath Drain or
K-7272 PVC Slotted Overflow Bath Drain
Recommended Products/Accessories
K-1491 Bath/Whirlpool Pillow
K-1601 Bath/whirlpool footstop, removable
K-23726 Drain treatment
K-23725 Cast iron cleaner
Included Components
Additional Components:
Cast iron adjustable feet (set of 4) Wooden Float wooden overflow/drain shroud
** Codes/Standards
ASME A112.19.1/CSA B45.2 ASTM F462
KOHLER® Enameled Cast Iron Bath and Shower Base Lifetime Limited Warranty
See the website for detailed warranty information.
Available Colors/Finishes**
Color tiles are intended for reference only.
Color Code Description
White
No change in measurements if connected with drain illustrated. (K-7272)
Technical Information
All product dimensions are nominal.
Installation: Freestanding
Drain location: Center
Basin area, bottom: 49″ x 22″ (1245 mm x 559 mm)
Basin area, top: 62-1/2″ x 24-3/4″ (1588 mm x 629 mm)
Weight: 365 lbs (165.6 kg)
Minimum floor load: 70 lbs/ft² (341.8 kg/m²)
Water depth: 15-1/4″ (387 mm)
Water capacity: 75 gal (283.9 L)
Notes
Measure your actual product for rough-in details.
Install this product according to the installation instructions.
The hot water supply should be 70% of the capacity of the bath or greater.
Installations will vary.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification
Sheet, go to www.kohler.com.
5-11-2022 21:07 – US/CA