Signalinks TD-LTE Wireless Data Terminal Installation Guide
- June 3, 2024
- Signalinks
Table of Contents
Quick Installation Guide
TD-LTE Wireless Data Terminal
Appearance
the picture is only for reference, please make the object as the standard.
Items list
| 4G Wireless Router × 1 | Power Adapter × 1 |
|---|---|
| PQuick Installation Guide × 1 | Warranty Card × 1 |
Working envoriments
To ensure proper functioning of the router, the operating environment is
recommended as follows:
a) Keep away from heat, maintain ventilation.
b) Lay equipments on flat surface.
c) Lay equipments in dry environment without dust.
d) Dismantle power supply and all wirings in thunderstorm weather in case of
lightning stroke.
Note: please supply rated power for equipments. If unmatched power is
supplied, router may get damaged.
Interfaces Description
| Interface | Function |
|---|---|
| Power | USB DC power input interface, connect to 12V/1A power adapter |
| Reset | Reset button, press and hold for more than 5 seconds in the power-on |
state, the router will restore factory settings
W/LAN| RJ45 network port, can be used as LAN port or WAN port
LAN| RJ45 network port, can be used as a LAN port
Sim card slot| SIM card slot, only supports standard SIM card
LED Lights indicators
| Indicator | [viewing | Status | Description |
|---|---|---|---|
| **** | Power | Always on | The light is on after connected to external power. |
| System | Always on | The light is on after the device is turned on. | |
| Wi-Fi | Always on | Wi-Fi function is normally enabled, no data connection. | |
| Flashing | VVi-Fi function is normally enabled, there is data connection | ||
| Networking indicator | Always on | There is network and data transmission. | |
| Off | No network or there is network but no data transmission. | ||
| Always on | After inserting the SIM card, the device finds the network and has |
a data connection.
| 4G indicator| Flashing| After inserting the SIM card, the device finds the
network but there
is no data connection.
Off| SIM card not inserted or the network is not found after inserting the SIM
card.
Installation steps
Router installation steps
This router has a built-in 3G/4G modem. Before using the 4G router, you need
to purchase a 4G SIM card from a local operator
Insert the 4G SIM card into the SIM card slot of the device.
Please pay attention to the insertion instructions near the SIM card slot.
This router only support standard SIM card. If you need to replace the SIM
card, please turn off the device power first to prevent damage to the SIM
card.
Power on
Please use the original factory standard power adapter to power the 4G router,
plug in the power supply and wait a while, because the device will take some
time to start up.
After startup, the power indicator and WIFI indicator are always on. After
successfully registering to the 4G network, the networking indicator will
always be on. Now you can use computers, mobile phones and other terminals to
connect to this machine through WIFI (refer to the body label for the WIFI
SSID) or network cable and use 4G data to surf the Internet.
Router Configuration
If you need to manage and configure this router, you can connect to the 4G router wirelessly or wiredly. For the default gateway address, please refer to the label on the router. These network parameters can be modified according to the actual situation, and the default values will be explained in the text.
Log in to the router configuration page
-
Open the browser of your computer or smartphone/tablet, enter the IP address on the router body sticker in the address bar, and than press Enter to enter the background login interface.
-
In the login window that pops up, enter the password: admin; then click “Login”
-
After entering the correct password, you can enter the router WEB configuration interface
Prompt: password of initial administrator is: admin; user can change administrator’s password after entering configuration page.
Working mode settings
CPE provides three modes of operation: Cable broadband mode, Wireless broadband mode, Automatic mode. Users can click “network connection” to turn off network before setting.
- Cable broadband mode
- Network parameter setting Like home routers, WAN port connect to broadband network, access the internet via the WAN.
- Automatic mode
Inserts the SIM card, access the internet via the 4G modem, and the RJ45 port are LAN mode.
Default mode, if WAN port connect to broadband network, it is equivalent to Cable broadband mode; if Inserts the SIM card, it is equivalent to Wireless.
Wi-Fi setting
Click “ Wi-Fi settings” icon on the homepage, there will be interface of WiFi settings as below.
Setting 3G/4G network
This router supports the function of automatically configuring 3G/4G dial-up
parameters. Automatic configuration of network dial-up parameters for most
operators in the world. Special APN customization requirements, Please set the
following steps:
Firstly: Confirm SIM card can work.
Secondly: Confirm that the 3G/4G dial setting normaily router meets the local
operator’s setup requirements. The step as below:
-
Please click on the “Set extranet connection” on the homepage, and enter the APN settings. Then select the “Manual” mode, and enter the user name, password, dialing number, APN parameter provided by 3G/4G ISP, click OK.
-
network searching method When you select “manual” in the network searching mode, the network list will pop up, including all the networks searched. The user selects an available network from the list, and the device will register to the network selected by the user.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>