DAREU EM901X RGB Wireless Gaming Mouse User Manual

DAREU EM901X RGB Wireless Gaming Mouse

What’s inside

Accessories composition

1. EM901X Light-weighted Mouse
2. 2.4G Receiver
3. Receiver Bottom Case
4. RGB Charging Base
5. TYPE-C cable

Basic Information

Button instruction

1. NANO receiver
2. Cable
3. Scroll button
4. DPI button
5. Left button
6. Right button
7. Forward button
8. Backward button
9. Power ON/OFF
10. Backlight ON/OFF

Further Knowing

Combination keys

• White light flashes one time (Power-saving mode): 125Hz
• White light flashes twice (Office mode): 250Hz
• White light flashes three times (Gaming mode): 500Hz
• White light flashes four times (E-sport mode): 1000Hz

Mouse parameter

Wireless Mode

| Working Mode| 2.4G wireless power saving mode / office mode| 2.4G wireless gaming mode / e-sport mode
---|---|---|---
Report Rate| 125/250Hz| 500/1000Hz
Indicator Light| Indicator light will flash in red in 1Hz for reminding when voltage is lower than 10%
DPI| 600/1200/2400/3600/4800/10000dpi
Battery Capacity| 930mAh
Power Consumption| 30mAh (MAX)
Standby Mode| 5.5mA(after 20 minutes)
Charging time| 4 hours
Service durationv| 40hours(light off ) 20hours(light on)
Wired Mode| Product Name| EM901X (Dual Mode)| Max Speed| 100 IPS
---|---|---|---|---
IC| ATG 4090| Max Acceleration| 20G

Resolution

| 125/250/500/1000Hz

(Default :1000Hz)

| Refresh Rate| 6000 fps
Weight| 85g±5g| DPI value| 600/1200/2400/3600/4800/10000dpi
Charging Current| 230mA| DPI color| Red/Blue/Green/Yellow/Orange/Purple

Plugged cable, mouse is default in wired mode and begins charging. 0-10% charged  mouse lights in red, 10-90% in yellow, and 90%-100% in green

Mouse installation & usage

Professional operations

DPI value/lighting color

By default DPI is adjustable in 6 steps by DPI+/- button.

• Red (600dpi) Blue (1200dpi)
• Green (2400dpi) Yellow (3600dpi)
• Orange (4800dpi) Purple (10000dpi)
• Colors above are default color

Code matching

1. Turn on mouse
2. Press left/middle/right button (as picture shows) at the same time to enter matching mode and at this time Logo indicator light will flash in yellow.
3. Plug receiver into computer USB port
4. Put mouse close to receiver and wait for code matching finishing. When code is matched, LOGO indicator light will switch to constant color based on current DPI value.

How to use driver

• Driver
• Driver interface
• Marco interface

Download the driver from DAREU website if needed.

Dongguan Togran Electronics Technology Co., Ltd Add: No.262 Shidan Rd, 3rd Industrial Park, Juzhou Area, Shijie Town, Dongguan City, China 523290 Tel: +86 769 86308806 Fax: +86 769 86308826 Email: Info@dareu.com CS@dareu.com Web: www.dareu.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>