DAREU LM135D Wireless Mouse User Manual
- June 1, 2024
- Dareu
Table of Contents
DAREU LM135D Wireless Mouse
Specifications
Physical Specification
- Connectivity: 2.4G
- Number of Buttons: 5
- Cable Length: 0.4m (for charging only)
- Dimensions: 98 x 62 x 37mm
Electrical Specification
- Tracking Speed: 28 IPS
- Report Rate: 2.4G 250Hz
- DPI: 1200
- Battery Capacity: 300mAh
- Working Time: Approx. 35 hours
- Charging Time: Approx. 2 hours
- Wake Up Method: Move wake up
- Compatibility: Windows XP/Win 7/Win 8/Win 10/Mac OS/Android
Product Usage Instructions
Button Introduction
- Left Button
- Scroll Wheel
- Pairing Button
- Indicator Light
- Right Button
- Power ON/OFF Button
- Receiver Slot
How to Connect in 2.4G Mode
- Switch the mouse to 2.4G mode.
- Insert the provided receiver into the USB port of your device.
- Your mouse is now ready to use in 2.4G mode.
FAQ (Frequently Asked Questions)
FCC Caution Information
This device complies with part 15 of the FCC Rules. Operation is subject to
the following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
What’s in the box
U-C cable x1
User manual x1
Parameter
Physical specification
- Connect: 2.4G Button: 5
- Cable: 0.4M (Only for charging)
- Dimension: 98x62x37mm Weight: 69±5g
Electrical specification
- Tracking speed: 28IPS
- DPI: 1200
- Report rate: 2.4G 250Hz
- Battery: 300mAh
- Working time: approx. 35 hours
- Charging time: approx. 2 hours
- Wake up: move wake up
- Compatibility: Windows XP/Win 7/Win 8/Win 10/MaC OS/Android
Button introduction
- Left button
- Right button
- Scroll wheel
- Power ON/OFF
- pairing button
- Receiver
- Indicator light
How to connect
2.4G connection
- Switch to 2.4G mode
- Insert the receiver and use
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Mfg.: Dongguan Togran Electronics Technology Co., Ltd
Add.: No. 110, Shidan Rd, Shijie Town, Dongguan City, Guangdong Province,
China 523290
Tel: +86 769 86308806 Fax: +86 769 86308826
Email: [email protected]
[email protected]
Web: www.dareu.com