SALUS RE600 Controls Ireland User Guide
- June 3, 2024
- SALUS
Table of Contents
RE600 Controls Ireland User Guide
Introduction
SALUS RE600 is a product that is used as a booster to extend Zigbee devices
communication range. It can be installed directly within a wall box or surface
mounted onto the wall using the supplied wall bracket. This product must be
used with the SALUS UGE600/UG600 (purchased separately). The SALUS
UGE600/UG600 allows communication with other SALUS Smart Home products using
the SALUS Smart Home App.
Product Compliance
This product complies with the essential requirements and other relevant
provisions of Directives 2014/53/EU (RED) and 2011/65/EU. The full text of the
EU Declaration of Conformity is available at the following internet address:
www.saluslegal.com.
Safety information
Use in accordance with the regulations. Indoor use only. Keep your device completely dry. Disconnect your device before cleaning it with a dry cloth. This accessory must be fitted by a competent person, and installation must comply with the guidance, standards and regulations applicable to the city, country or state where the product is installed. Failure to comply with the relevant standards could lead to prosecution.
Box content
|
---|---
Smart repeater| Wall mounting bracket
|
Fixing kit| Quick Guide
Terminals
| L | Live 230V AC |
|---|---|
| N | Neutral 230V AC |
Wiring
Mounting
LED Indication
| Description | LED |
|---|---|
| Joining Network automatically | RED LED pulsing |
| Joining Network trigger by button press | RED+GREEN LED turn on for 1 second, |
then RED LED pulsing
Device with Network| RED LED
Device without Network or loss link| RED LED pulsing
Identify| GREEN LED flashing for up to 10 minutes
Pairing
Once powered, the LED will flash red to indicate pairing mode.
Button operation
To identify the device, short press the button.
To enter pair mode, press and hold the button for 3 seconds.
To do a factory reset, press and hold the button until LED flashes red (max 15
sec).
support@salus-controls.de
tel: +49 6108 8258515
EN: tech@salus-tech.com
tel: +44 (0) 1226 323961
Head Office:
SALUS Controls plc
SALUS House
Dodworth Business Park South,
Whinby Road, Dodworth,
Barnsley S75 3SP, UK.
T: +44 (0) 1226 323961
E: sales@salus-tech.com
www.salus-controls.com
SALUS Controls is a member of the Computime Group
Maintaining a policy of continuous product development SALUS Controls plc
reserve the right to change specification, design and materials of products
listed in this brochure without prior notice.
For PDF Installation guide please go to www.salus-manuals.com
Issue Date: October 2017 V007
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>