NINJA Foodi CI100UK 3-in-1 Hand Blender, Mixer and Chopper User Guide
- June 3, 2024
- Ninja Foodi
Table of Contents
NINJA Foodi CI100UK 3-in-1 Hand Blender, Mixer and Chopper
WHAT’S INCLUDED
Power Base:
Choose from multiple attachments and accessories to unlock an array of outputs
for the power base.
Hand Mixer Attachment:
Power through any recipe with 5 mixing speeds.
Hand Mixer Accessories:
(vary by model)
Two Beaters and a Single Whisk
Chopper Attachment:
Attach to power base to chop, mince, and puree ingredients. Storage lid
included.
Hand Blender Attachment:
2 blending speeds allow you to blend the toughest ingredients.
CLEANING
Unplug the power base before cleaning. Wipe the power base, hand mixer attachment, and chopper processing lid with a clean, damp cloth.
HAND BLENDER
HAND MIXER
Assembly
Install the power base:
Align the arrow on the power base with the arrow on the hand blender
attachment, then push the power base onto the blender attachment to lock it in
place.
Remove the power base:
Press and hold the release buttons on each side of the power base to detach
.
Install power base:
Align the arrow on the power base with the arrow on the mixer attachment, then
push the power base onto the attachment to lock it in place.
Choose your accessory:
Install both beaters or the whisk using the accessory slots on the hand mixer
attachment. Insert the beater with the collar into the slot with the diagram
showing a collar. The whisk can be inserted into either slot. You will hear a
slight click when locked into place.
Set up the blade & lid assembly:
Holding the blade assembly by the top of the shaft, install it in the chopper
bowl. Place ingredients in the bowl. Install the processing lid so it sits
into place. Ensure the lid is fully installed prior to use; there will be no
click.
Install the power base:
Attach the power base by aligning the arrow on the power base with the arrow
on the processing lid, then push the power base onto the lid to lock it in
place.
Disassembly
Remove the power base:
Press and hold the release buttons on each side of the power base to detach.
Using the controls
- POWER: Press and hold continuously to blend.
- TURBO: While continuously holding to blend, press and hold the TURBO button to jump quickly to high speed.
Blending Speeds
LOW:
Use to blend liquids, such as mayo, dressing or soups and sauces with soft
ingredients, such as tomato sauce.
TURBO:
Use for tougher ingredients, such as butternut squash or for smooth purees,
such as houmous.
-
EJECT: Push to remove the beaters or other accessories.
-
SPEED RANGE INDICATOR: LEDs illuminate to indicate speed settings 1–5.
POWER: Press to turn the unit on and off. -
SPEED SELECTOR: Increase or decrease speed by pressing the up or down arrows.
-
TURBO: Press and hold to quickly jump to speed 5.
Mixing Speeds
- SPEEDS 1 & 2: Use when combining dry ingredients, like flour, with liquid ingredients.
- SPEEDS 3 & 4: Use for cookie doughs, batters, quick bread, icing, and most other recipes.
- SPEED 5: Use speed 5 for whipping cream, mousse, or egg whites.
NOTE:
To prevent ingredients from splattering, start on a low speed, then slowly
ramp up to the desired setting.
- POWER: Press and hold continuously to process. Use short presses for short pulses and long presses for long pulses.
- The TURBO button is disabled when using the chopper attachment. The chopper will run at high speed.
Disassembly
Remove the power base:
Press and hold the release buttons on each side of the power base to detach.
Remove the processing lid:
Lift up the processing lid. Always remove the blade assembly before emptying
the bowl.
Blending
Choose your container:
The container should be large enough for the blender head to be fully
submerged in the ingredients. Once submerged, there should be ample room in
the container to avoid overflowing and splashing. A cooking pot, large
measuring container, or blending jug (not included with all models) is
recommended.
Blending:
Submerge the blender head in the ingredients. Use an up-and-down motion to
blend, making sure to stop blending any time the blender head is no longer
submerged.
NOTE: For best results, hold the unit with the control panel facing away from you.
Disassembly
-
Eject accessory:
Push the eject button on the hand mixer attachment to remove the beaters or other accessories. -
Eject power base:
Press and hold the release buttons on each side of the power base to detach.
Chopper Basics
For best results:
- Prep ingredients into even-sized pieces and ensure they sit below the top blade.
- Avoid overfilling and use short pulses to get the evenest results.
- Hold the chopper bowl with one hand while processing for more control.
Storage
Use the included storage lid to store ingredients in the bowl.
WARNING:
The chopping blade assembly is sharp and not locked in place. Before emptying
the bowl carefully remove the chopping blade assembly. Failure to do so will
result in a risk of laceration. Refer to the Ninja Safety Instructions for
additional information.
To register your product or order additional parts and accessories, visit us online at ninjakitchen.co.uk.
FOODI and NINJA have registered trademarks in the United Kingdom of SharkNinja Operating LLC.
© 2022 SharkNinja Operating LLC
CI100UK_QSG_MP_220513_Mv3.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>