NINJA Foodi AG300C Series 4 in 1 Indoor Grill Owner’s Manual

NINJA Foodi AG300C Series 4 in 1 Indoor Grill

IMPORTANT SAFEGUARDS

Read and review instructions for operation and use. Take care to avoid contacts with hot surface. Always use hand protection to avoid burns. For indoor and household use only. Read all instructions before using your Ninja® FoodiTM Grill. When using electrical appliances, basic safety precautions should always be followed, including the following:

WARNING

1. Remove and discard the protective cover fitted on the power plug of this appliance.
2. This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
3. Keep the appliance and its cord out of reach of children. DO NOT allow the appliance to be used by children. Close supervision is necessary when used near children.
4. This appliance is for household use only. DO NOT use this appliance for anything other than its intended use. DO NOT use in moving vehicles or boats. DO NOT use outdoors. Misuse may cause injury.
5. Ensure the surface is level, clean and dry. DO NOT place the appliance near the edge of a countertop during operation.
6. ALWAYS ensure the appliance is properly assembled before use.
7. When using this appliance, provide at least 6 inches (15.25 cm) of space above and on all sides for air circulation.
8. DO NOT use an extension cord. A short power-supply cord is used to reduce the risk of children grabbing the cord or becoming entangled and to reduce the risk of people tripping over a longer cord.
9. To protect against electrical shock DO NOT immerse cord, plugs, or main unit housing in water or other liquid.
10. DO NOT use the appliance if there is damage to the power cord or plug. Regularly inspect the appliance and power cord. If the appliance malfunctions or has been damaged in any way, immediately stop use and call Customer Service.
11. NEVER use outlet belowcountertop surface.
12. DO NOT place appliance and let cord hang over edges of tables, counters or touch hot surfaces.
13. Only use recommended accessories included with this appliance or authorized by SharkNinja. The use of accessories or attachments not recommended by SharkNinja may cause a risk of fire or injury.
14. Before placing any accessory into the cooker, ensure they are clean and dry.
15. DO NOT use the appliance without the removable cooking pot and splatter shield installed.
16. ALWAYS ensure hood is fully closed before operating.
17. DO NOT move the appliance when in use.
18. DO NOT cover the air intake vent or air outlet vent while unit is operating. Doing so will prevent even cooking and may damage the unit or cause it to overheat.
19. DO NOT touch hot surfaces. Appliance surfaces are hot during and after operation. To prevent burns or personal injury, ALWAYS use protective hot pads or insulated oven mitts and use available handles and knobs.
20. DO NOT touch accessories during or immediately after cooking. The grill grate and basket becomes extremely hot during the cooking process. Avoid physical contact while removing the accessory from the appliance. To prevent burns or personal injury ALWAYS use care when interfacing with product. Recommend use of long handed utensil and protective hot pads or insulated oven mitts.
21. DO NOT use this appliance for deep-frying.
22. To prevent possible illness, ALWAYS use a thermometer to check that your food is cooked to the recommended temperatures.
23. Should a grease fire occur or the unit emits black smoke, unplug immediately. Wait for smoking to stop before removing any cooking accessories.
24. Please refer to the Cleaning & Maintenance section for regular maintenance of the appliance.
25. Unplug from outlet when not in use and before cleaning. Allow to cool before cleaning, dissasembly, putting in or taking off parts and storage.
26. DO NOT clean with abrasive cleaners, steel wool, or scouring pads.
27. Cleaning and user maintenance shall not be made by children.
    SAVE THESE INSTRUCTIONS.

PARTS

NOTE Additional accessories are available for purchase at ninjaaccessories.com

GETTING TO KNOW YOUR FOODITM GRILL

FUNCTION BUTTONS

NOTE: Not all functions are included on every model.

GRILL Grill indoors while creating even char, grill marks, and grilled flavor.
AIR CRISP For crispiness and crunch with little to no oil.
ROAST Tenderize meats, roast vegetables, and more.
BAKE Use to bake cakes, treats, desserts, and more.
DEHYDRATE Dehydrate meats, fruits, and vegetables for healthy homemade snacks.

OPERATING BUTTONS

POWER button Once the unit is plugged in, press the power button to turn on the unit. Pressing it during cooking stops the current cooking function and turns off the unit.

arrows Use the up and down arrows to adjust the cooking temperature in any function. When using the Grill function, toggle the GRILL button or use the up and down arrows to adjust cooking temperature.
arrows Use the up and down arrows to adjust the cook time in any function.

NOTE: To adjust temperature or time during cooking, press the up and down arrows. The unit will then resume at those settings.

button After selecting temperature and time, press the button to begin cooking.

STANDBY MODE
The unit will power off if cooking is not in process and there has been no interaction with the control panel for 10 minutes.

BEFORE FIRST USE

1. Remove all packaging material, promotional labels, and tape from the unit.
2. Remove all accessories from the package and read this manual carefully. Please pay particular attention to operational instructions, warnings, and important safeguards to avoid any injury or property damage.
3. Wash the grill grate, splatter shield, crisper basket, cleaning brush, veggie tray, griddle, kebabs, and cooking pot in warm, soapy water, then rinse and dry thoroughly. The grill grate, splatter shield, crisper basket, cleaning brush, veggie tray, griddle, kebabs, and cooking pot are also dishwasher safe. NEVER clean the main unit in the dishwasher.

USING YOUR FOODITM GRILL

SPLATTER SHIELD
Located on the underside of the hood, the splatter shield keeps the heating element clean and prevents smoking. The splatter shield is removable for cleaning, but we recommend keeping it in place when cooking.

Removing the splatter shield
Remove the splatter shield for cleaning after every use. First allow the splatter shield to cool completely, then remove it by using your thumb to release the front clip by pushing the front clip upward and using your other hand to pull one of the tabs toward you. This will release the splatter shield, allowing you to pull it out of the slot along the back of the hood.

Installing the splatter shield
To install, gently push the splatter shield into the back of the hood. Insert the back tab on shield with the slot on the back of the hood.
Then push the splatter shield upward until it clicks into the clip on the front of the hood.

GRILLCONTROL TECHNOLOGY
Our technology allows you to control the temperature of the grill grate for precise cooking and keep smoke out of the kitchen.
When using the Grill function, you will need to select the grill grate temperature setting. Below are recommended temperature levels for common ingredients.

NOTE: The unit could create smoke during the cooking process. For less smoke, we recommend using canola, coconut, avocado, grapeseed, or vegetable oil instead of olive oil.
NOTE: The unit may produce smoke when cooking meats on a hotter setting than what is recommended. For more cooking charts, refer to your Inspiration Guide or visit ninjakitchen.com.

Switching to Grill after using another function
If the unit is already warm from using a different function, and the grill grate is at room temperature when you place it in the unit, “Add Food” may appear on the screen immediately. We recommend allowing the grill grate to heat up for at least 6 minutes before placing ingredients on it. As the unit continues to run and the grill grate heats up, “Add Food” will remain on the screen until you open the hood and place ingredients on the grate.

Batch grilling
When grilling more than two consecutive batches of food, it is recommended that you empty the fat/oil from the removable cooking pot. This will help prevent grease from burning and causing smoke.
We also recommend allowing the grill grate to heat back up for at least 3–5 minutes between batches to ensure consistent grill marks and char.

COOKING FUNCTIONS

Ensure the unit is plugged in before turning it on. Press the power button.

Grill

1. Place the cooking pot in the unit with the indent on the pot aligned with the rear bump on the main unit. Then place the grill grate in the pot with the handles facing up. Ensure the splatter shield isin place and close the hood.

2. Press the GRILL button. The default temperature level will illuminate on the left side of the control panel and the corresponding air temperature will appear on the display screen. Press the  Grill button or the up and down arrows to adjust the temperature setting.

3. Press the up and down arrows to set the cooking time in one-minute increments, up to 30 minutes.

4. Press the button to begin preheating. PRE will appear on the display screen, and the progress bar will begin. It can take about 8 minutes to preheat, depending on the selected temperature setting.

5. When preheating is complete, the unit will beep and “Add Food” will flash across on the display screen.

6. Open the hood and place ingredients on the grill grate. Once the hood is closed, cooking will begin and the timer will start counting down.
   NOTE: During cooking, you can open the hood to check on or flip your food. The timer will pause when the hood is opened and then automatically resume after it is closed.

7. When cook time is complete, the unit will beep and END will appear on the display screen. Keep the hood open after removing your food so the unit will cool down more quickly. The stainless steel wrap on the exterior of the unit will be hot after cooking. If you need to cook your food longer, simply press the up arrow to add more time, then press the button.
   NOTE: If batch cooking, empty the oil from the removable cooking pot after every 2 batches. This will help prevent grease from burning and causing smoke.

Air Crisp

1. Place cooking pot in the unit with the indent on the pot aligned with the bump on the main unit. Place the crisper basket in the pot, then close the hood.

2. Press the AIR CRISP button. The default temperature setting will display. Use the up and down arrows to adjust the temperature.

3. Use the up and down arrows to set the cook time in 1-minute increments up to 1 hour.

4. Press the button to begin preheating. PRE will appear on the display screen, and the progress bar will begin. It can take up to 3 minutes to preheat, depending on the selected temperature setting.
   NOTE: While preheating is strongly recommended for best results, you can skip it by pressing the BAKE button again. “Add Food” will flash across the screen. Open the hood and place ingredients in the crisper basket. Once the hood is closed cooking will begin and the timer will start counting down.

5. When preheating is complete, the unit will beep and “Add Food” will flash across on the display screen.

6. Open the hood and add ingredients to the pot or set your bake pan directly in the bottom of the pot, and close the hood to start cooking. Once the hood is closed, cooking will begin and the timer will start counting down.
   NOTE: During cooking, you can open the hood to check on your food. The timer will pause when the hood is opened and then automatically resume after it is closed.

7. When cook time is complete, the unit will beep and END will appear on the display screen. Keep the hood open after removing your food so the unit will cool down more quickly. The stainless steel wrap on the exterior of the unit will be hot after cooking. If you need to cook your food longer, simply press the up arrow to add more time, then press the  button.

8. When cook time is complete, the unit will beep and END will appear on the display screen. Keep the hood open after removing your food so the unit will cool down more quickly. The stainless steel wrap on the exterior of the unit will be hot after cooking. If you need to cook your food longer, simply press the up arrow to add more time, then press the button.

Roast

1. Place cooking pot in the unit with the indent on the pot aligned with the bump on the main unit, then close the hood.

2. Press the ROAST button. The default temperature setting will display. Use the up and down arrows to adjust the temperature. NOTE: To convert conventional oven recipes, reduce the temperature by 25°F. Check food frequently to avoid overcooking.

3. Use the up and down arrows to set the cook time, in 15-minute increments, up to 4 hours.

4. Press the button to begin preheating. PRE will appear on the display screen, and the progress bar will begin. It can take up to 3 minutes to preheat, depending on the selected temperature setting.
   NOTE: While preheating is strongly recommended for best results, you can skip it by pressing the ROAST button again. “Add Food” will flash across the screen. Open the hood and place ingredients in the crisper basket. Once the hood is closed cooking will begin and the timer will start counting down.

5. When preheating is complete, the unit will beep and “Add Food” will flash across on the display screen.

6. Open the hood and place ingredients in the pot. Once the hood is closed, cooking will begin and the timer will start counting down. NOTE: During cooking, you can open the hood to check on your food. The timer will pause when the hood is opened and then automatically resume after it is closed.

7. When cook time is complete, the unit will beep and END will appear on the display screen. Keep the hood open after removing your food so the unit will cool down more quickly. The stainless steel wrap on the exterior of the unit will be hot after cooking. If you need to cook your food longer, simply press the up arrow to add more time, then press the button.

Bake

1. Place cooking pot in the unit so the indent on the pot aligned with the bump on the main unit, then close the hood.

2. Press the BAKE button. The default temperature setting will display. Use the up and down arrows to adjust the temperature.
   NOTE: To convert conventional oven recipes, reduce the temperature by 25°F. Check food frequently to avoid overcooking.

3. Use the up and down arrows to set the cook time, in 15-minute increments, up to 4 hours.

4. Press the button to begin preheating. PRE will appear on the display screen, and the progress bar will begin. It can take up to 3 minutes to preheat, depending on the selected temperature setting.
   NOTE: While preheating is strongly recommended for best results, you can skip it by pressing the BAKE button again. “Add Food” will flash across the screen. Open the hood and place ingredients in the crisper basket. Once the hood is closed cooking will begin and the timer will start counting down.

5. When preheating is complete, the unit will beep and “Add Food” will flash across on the display screen.

6. Open the hood and add ingredients to the pot or set your bake pan directly in the bottom of the pot, and close the hood to start cooking. Once the hood is closed, cooking will begin and the timer will start counting down.
   NOTE: During cooking, you can open the hood to check on your food. The timer will pause when the hood is opened and then automatically resume after it is closed.

7. When cook time is complete, the unit will beep and END will appear on the display screen. Keep the hood open after removing your food so the unit will cool down more quickly. The stainless steel wrap on the exterior of the unit will be hot after cooking. If you need to cook your food longer, simply press the up arrow to add more time, then press the  button.

Dehydrate

NOTE: The Dehydrate function is not included on all models.

1. Place cooking pot in the unit with the indent on the pot aligned with the bump on the main unit, then add a single layer of ingredients to the bottom of the pot.
   Place the crisper basket in the pot and add a layer of ingredients to the bottom of the basket. Close the hood.

2. Press the DEHYDRATE button. The default temperature setting will display.
   Use the up and down arrows to set your desired temperature.

3. Use the up and down arrows to set the dehydration time, in 15-minute increments, up to 12 hours.

4. Press the button to begin. The unit does not need to preheat.
   NOTE: During dehydration, you can open the hood to check on your food. The timer will pause when the hood is opened and then automatically resume after it is closed.

5. When dehydration time is complete, the unit will beep and END will appear on the display screen. Remove your food and close the hood.

CLEANING YOUR FOODITM GRILL

The unit should be cleaned thoroughly after every use. Always let the appliance cool before cleaning.

• Unplug the unit from the wall outlet before cleaning. Keep the hood open after removing your food so the unit will cool down more quickly.

• To clean the main unit, and control panel, wipe them with a damp cloth.

• The cooking pot, grill grate, crisper basket, splatter shield, cleaning brush, and any other included Ninja Foodi Grill accessories are dishwasher safe.
  NOTE: NEVER use abrasive tools or cleaners. NEVER immerse the main unit in water or any other liquid.

• If hand-washing, use the cleaning brush to help wash the parts. Use the opposite end of the cleaning brush as a scraper to assist with releasing baked-on sauces or cheese. Air-dry or towel-dry all parts after hand-washing.

• If food residue or grease are stuck on the grill grate, splatter shield, or any other removable part, place them in a sink or stack them in the pot and fill with warm, soapy water and allow to soak for a couple hours or overnight. After soaking, use the cleaning brush to clean each part.

• Over time, the splatter shield front tabs and frame may accumulate grease buildup. Soaking the splatter shield overnight will help soften the baked-on grease. After soaking, use the cleaning brush to remove the grease from the stainless steel frame and front tabs.

TROUBLESHOOTING GUIDE

• “Add Food” appears on the control panel display.
  The unit has completed its Grill preheating and it is now time to add your ingredients.

• “Shut Lid” appears on the control panel display.
  The hood is open and needs to be closed for the selected function to start.

• “Add Pot” appears on the control panel display.
  The pot is not installed in the unit.

• “E” appears on the control panel display.
  The unit is not functioning properly. Please contact Customer Service at 1-877-646-5288. So we may better assist you, please register your product online at registeryourninja.com and have the product on hand when you call.

• Why do blinking lights appear after I press the button?
  This is a progress bar indicating how far along you are in the preheating cycle.

• Why does the preheat progress bar not start from the beginning?
  When the unit is warm from previously being used, it will not require the full preheating time.

• Should I add my ingredients before or after preheating?
  Let the unit preheat before adding ingredients.

• Why is my unit emitting smoke?
  When using the Grill function, always select the recommended temperature setting. Recommended settings can be found in the Quick Start Guide and in the Inspiration Guide. Make sure the splatter shield is installed.

• How do I pause the unit so I can check my food?
  When the hood is opened during a cooking function, the unit will automatically pause.

• My food is burned.
  Do not add food until preheating is complete. For best results, check progress throughout cooking, and remove food when desired level of brownness has been achieved. Remove food immediately after the cook time is complete to avoid overcooking.

• My food didn’t cook when air crisping.
  For consistent browning, make sure ingredients are arranged in an even layer on the bottom of the crisper basket with no overlapping. Shake loose ingredients during cooking for consistent crispiness.

• Why is my food blowing around when air crisping?
  Occasionally, the fan will blow lightweight foods around. To prevent this, secure loose food (like the top slice of bread on a sandwich) with toothpicks.

• Can I air crisp fresh battered ingredients?
  Yes, but use the proper breading technique. It is important to coat foods first with flour, then with egg, and then with bread crumbs. Be sure to press the bread crumbs onto the food so they stick in place. Loose breading may be blown off by the unit’s powerful fan.

• The control panel display is no longer illuminated.
  The unit is off. Press the power button to turn it back on.

• Can I cancel or override preheating?
  Preheating is highly recommended for best results. skip preheating by selecting the function again after you press the START/STOP button. However, you cannot override preheating when using the Grill function.

• How can I deep clean the splatter shield?
  The splatter shield should be cleaned after each use and is dishwasher safe. Over time, the splatter shield front tabs and frame may accumulate grease buildup. Soaking the splatter shield overnight will help soften the baked-on grease. After soaking, use the cleaning brush to remove the grease from the stainless steel frame and front tabs.

REPLACEMENT PARTS
To order additional parts and accessories, visit ninjaaccessories.com or contact Customer Service at 1-877-646-5288.

ONE (1) YEAR LIMITED WARRANTY

The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?
Our Customer Service Specialists are available to provide all the warranty service options available to you, including the possibility of upgrading to our VIP Warranty Service Options for select product categories.

1. Normal wear and tear of wearable parts (including cooking pot, grill grate, crisper basket, splatter shield, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by your warranty. Replacement parts are available for purchase at ninjaaccessories.com

2. Any unit that has been tampered with or used for commercial purposes

3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the splatter shield and grease collector clean), or damage due to mishandling in transit.

4. Consequential and incidental damages.

5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product
   (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.

6. Products purchased, used, or operated outside North America.

How to get service
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit ninjakitchen.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-877-646-5288 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. So we may better assist you, please register your product online at registeryourninja.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $19.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at registeryourninja.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information.

How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

SharkNinja Operating LLC
US: Needham, MA 02494
1-877-646-5288
ninjakitchen.com

Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
NINJA is a registered trademark of SharkNinja Operating LLC.
FOODI is a trademark of SharkNinja Operating LLC.
For SharkNinja U.S. patent information, visit sharkninja.com/uspatents
© 2019 SharkNinja Operating LLC
PRINTED IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>