CLD Street Legal Light Bar Driving, Fog Beam Installation Guide
- June 3, 2024
- CLD
Table of Contents
STREET LEGAL LIGHT BAR
DRIVING / FOG BEAM
CLDBARS6H/ CLDBARS6F
CLDBARS10H/ CLDBARS20H
WHAT’S INCLUDED:
- 1 X Light Bar
- Side and Bottom Mount Brackets & Hardware
FEATURES & SPECIFICATIONS:
- Light Output: 718 – 6,898 Lumens
- Power: 20W – 180W @ 13.6V DC
- Voltage: 10 – 36V DC
- Beam Pattern & Compliance:
6″ Auxiliary High Beam (SAE J581, CLDBARS6H)
6″ Fog Light (SAE J583, CLDBARS6F)
10″ Auxiliary High Beam (SAE J581, CLDBARS10H)
20″ Auxiliary High Beam (SAE J581, CLDBARS20H)
MOUNTING INSTALL INSTRUCTION
INSTALL INSTRUCTION
- Determine suitable mounting locations to install the LED light bars, wiring harness and switch. Once all mounting locations are confirmed, connect the wires as shown above. Proper insulation at connections is required.
- Connect positive and negative wire properly. Press the switch button to test if the lights are functioning properly.
- Adjust the light to the desired angle and then secure by tightening all mounting screws.
SKU# CLDBARS6H / CLDBARS6F / CLDBARS10H / CLDBARS20H
CLDLED.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>